other
Products
General Electric IS200EACFG3A higher-voltage AC feedback board product views
General Electric IS200EACFG3A higher-voltage AC feedback board product views
General Electric IS200EACFG3A higher-voltage AC feedback board product views

General Electric IS200EACFG3A higher-voltage AC feedback board

EMAIL SALES
General Electric EX2100
IS200EACFG3A — higher-voltage AC feedback board

IS200EACFG3A is offered for matched EX2100 installations. It provides the AC-feedback interface for the selected excitation voltage group.

General ElectricEX2100higher-voltage AC feedback board
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IS200EACFG3A product profile
Product familyEX2100
Exact modelIS200EACFG3A
Feedback purposeExcitation AC sensing
Nominal group limitUp to 1300 Vrms (+20% condition)
Frequency condition50/60 Hz
Installed comparisonFeedback source and board revision
  • Brand:

    General Electric
  • Item NO.:

    IS200EACFG3A
IS200EACFG3A configuration inquiry

Get a precise quote for IS200EACFG3A

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IS200EACFG3A functions and installation

Provides the AC-feedback interface for the selected excitation voltage group. Match the sensing source to this higher-voltage voltage group. Specify feedback board and required cables separately from the power converter.

Application purposeProvides the AC-feedback interface for the selected excitation voltage group.
Connection arrangementMatch the sensing source to this higher-voltage voltage group.
Installation preparationRecord the higher-voltage feedback source and cable destinations.
Operational acceptanceProve the restored feedback assignment before releasing automatic operation.

Installation and selection boundaries

  • Retain the 1300 Vrms nominal group statement and its +20% condition together.
  • Preserve the stated 50/60 Hz application condition.
  • Match the complete group and initial board revision before accepting an alternative.
Official product data

IS200EACFG3A key specifications

Feedback application EX2100 excitation AC feedback
Voltage group Initial G3 revision
Nominal group limit Up to 1300 Vrms
Stated voltage condition +20%, retained with the nominal group limit
Frequency applicability 50/60 Hz

GE excitation-control instructions.

Pre-order check 01

Installation environment

Prepare IS200EACFG3A against the accepted equipment drawing and maintenance procedure.

  • Isolate the excitation system and connected feedback source.
  • Record the higher-voltage feedback source and cable destinations.
  • Inspect the complete board marking and mating connector condition.
  • Prove the restored feedback assignment before releasing automatic operation.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Feedback source
Match the sensing source to this higher-voltage voltage group.
Voltage qualification
Retain the 1300 Vrms nominal group statement and its +20% condition together.
Frequency
Preserve the stated 50/60 Hz application condition.
Revision identity
Match the complete group and initial board revision before accepting an alternative.
Supplied scope
Specify feedback board and required cables separately from the power converter.
Specify feedback board and required cables separately from the power converter.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF948General Electric IC600CB504General Electric IC600CB507

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB513General Electric IC600BF830General Electric IC600BF908

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF914General Electric IC600BF915General Electric IC600BF923

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF940General Electric IC600BF941General Electric IC600BF942

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently Nevada / SiemensBently Nevada 330103-02-04-10-02-CNBently Nevada 330854-080-24-05Siemens 6GK5308-2FM10-2AA3

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / SiemensVibro-Meter VM600 RPS6U SIM-275D-24 200-582-200-013Siemens 6ES7142-6BH00-0AB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-Meter / SiemensBently Nevada 330130-075-01-00Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10Siemens 6ES7143-5BF00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently Nevada / Vibro-MeterSiemens 6ES7144-1GB31-0XB0Bently Nevada 330903-00-07-10-01-CNVibro-Meter S3960 AC46286 144-201-000-222

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05Vibro-Meter AF70982 111-412-000-012

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / Bently NevadaVibro-Meter CA202 144-202-000-215Vibro-Meter CA134 144-134-000-612Bently Nevada 330104-00-08-15-02-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7144-4FF01-0AB0Bently Nevada 330854-080-25-05Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-MeterBently Nevada 330905-00-25-05-02-CNVibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000Bently Nevada 330103-02-08-10-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IS200EACFG3A Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord IS200EACFG3A with its complete hardware identification.
2Review the assemblyMatch the sensing source to this higher-voltage voltage group.
3Capture the operating configurationRetain the 1300 Vrms nominal group statement and its +20% condition together.
4Inspect the installationInspect the complete board marking and mating connector condition.
5Define the order scopeSpecify feedback board and required cables separately from the power converter.
6Prove the restored functionProve the restored feedback assignment before releasing automatic operation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Vibro-MeterTQ902-011 111-902-000-011 A1-B1-C42-D2-E10000-F2-G9800-H10

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterTQ402 111-402-000-012

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterCA202 144-202-000-205

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4PF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5AH00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IS200EACFG3A selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IS200EACFG3A FAQ

Which nominal voltage group identifies IS200EACFG3A?The initial G3 revision belongs to the group specified up to 1300 Vrms nominal, with the stated +20% and 50/60 Hz conditions retained.
Does a later EACF voltage capability automatically cover the initial G3 revision?No. Revision changes matter. Keep the initial-revision voltage-group requirement with the complete board identity during selection.
What does the +20% condition mean for the feedback selection record?Keep it as the condition attached to the nominal voltage-group statement. Do not convert that statement into an unrelated operating or dielectric-test rating.
How is this higher-voltage EACF application distinguished from bridge control?It concerns AC feedback in EX2100. Bridge firing and excitation power conversion remain separate functions in the system.
What must be retained for the feedback-source connection?Retain the source identification, cable destination and accepted sensing-circuit assignment before removing the board.
Can an EACF board be qualified from its transformer appearance?No. Compare the complete group and revision marking with the required feedback application; appearance is not an electrical qualification.
What frequency should the installed G3 sensing source be checked against?Check the 50/60 Hz applicability together with the nominal group voltage and its stated condition.
What precautions apply before handling IS200EACFG3A?Safely isolate the excitation equipment and its feedback circuits, then apply ESD-safe handling and inspect the mating connections.
What should be tested before releasing the higher-voltage feedback path?Verify the restored feedback assignment and expected system indications using the approved excitation commissioning procedure.
How should the G3 feedback-board order be scoped?Identify the complete board revision, feedback-source application and any separately required cables so that a board-only order is not mistaken for an assembled circuit.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric EX2100

Applications & Why Choose Nordwel

Application and maintenance planning for IS200EACFG3A in the correctly matched installation.

Application areas

01AC excitation feedbackProvide sensing feedback in the matched higher-voltage application.
02Revision-specific replacementCompare the board identity against the accepted feedback circuit.
03Connection restorationPreserve the source and cable destinations during maintenance.
04Excitation commissioningValidate feedback indications before automatic control resumes.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Specify feedback board and required cables separately from the power converter.
Need help matching IS200EACFG3A to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp