other
Products
Siemens 6ES7193-7AA10-0AA0 TM-IM/EM60C spring-terminal module product views
Siemens 6ES7193-7AA10-0AA0 TM-IM/EM60C spring-terminal module product views
Siemens 6ES7193-7AA10-0AA0 TM-IM/EM60C spring-terminal module product views

Siemens 6ES7193-7AA10-0AA0 TM-IM/EM60C spring-terminal module

EMAIL SALES
Siemens ET 200iSP
6ES7193-7AA10-0AA0 — TM-IM/EM60C spring-terminal module

6ES7193-7AA10-0AA0 is an ET 200iSP TM-IM/EM60C terminal module with spring-loaded field terminals. It combines one interface position with one supported electronic-module position.

SiemensET 200iSPSpring-terminal module
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7193-7AA10-0AA0 product profile
Product familyET 200iSP
Exact model6ES7193-7AA10-0AA0
Field connectionSpring-loaded terminals
Process-terminal arrangement4 × 4
Dimensions W × H × D60 × 190 × 52 mm
PrewiringSupported
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7193-7AA10-0AA0
6ES7193-7AA10-0AA0 configuration inquiry

Get a precise quote for 6ES7193-7AA10-0AA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7193-7AA10-0AA0 functions and installation

The 6ES7193-7AA10-0AA0 base provides the terminal structure for the interface and its neighboring electronic module. Its spring-loaded field connections, prewiring capability and rail contact are installation features distinct from the fitted module signal-processing function.

Field-terminal mechanismSecures the supported field conductors with the spring-loaded connection system.
Module accommodationProvides separate interface and electronic-module positions.
Prewired assemblyAllows the circuit wiring to be prepared before the electronic modules are installed.
Operational bondingUses the spring contact to connect the shield/interference path to the mounting rail.

Installation and selection boundaries

  • The 4 × 4 terminal arrangement is not a statement of the fitted electronic module channel count.
  • The bus plug and any fitted electronic modules visible in a photograph are separate supplied-scope items.
  • The complete station must retain its approved hazardous-area installation and equipotential-bonding conditions.
Official product data

6ES7193-7AA10-0AA0 key specifications

Terminal-module designation TM-IM/EM60C
Product family ET 200iSP
Module positions One interface module plus one supported electronic module
Connection type Blue spring-loaded field terminals
Process-terminal arrangement 4 × 4; signal assignment determined by fitted electronics
PROFIBUS connection One 9-pole D-sub socket for RS 485-IS
Prewiring capability Yes
Shield/bonding path Operational connection to the mounting rail through a spring contact
Dimensions W × H × D 60 × 190 × 52 mm

Siemens ET 200iSP Operating Instructions, A5E00247483-AK, November 2022, section 10.3.

Pre-order check 01

Installation environment

Prepare the matched station, conductor records and controlled installation of 6ES7193-7AA10-0AA0.

  • Plan a safe maintenance state and retain the accepted wire and module-position records.
  • Prepare the actual conductor and ferrule combination for the spring-terminal wiring rules.
  • Inspect terminal retention, the mounting-rail contact and the interface/electronic-module seats.
  • Check the station network path and restore the field-signal response under the approved test procedure.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Current identity
Match 6ES7193-7AA10-0AA0 and the TM-IM/EM60C designation.
Terminal mechanism
Use spring-terminal conductor preparation; do not assume screw-terminal handling.
Module combination
Check the intended interface on the left and permitted electronic module on the right.
Connector scope
Confirm the actual bus connector and interface arrangement independently of the base photograph.
Wiring and bonding
Retain the module-specific field map and the operational rail-bonding path.
Retain the spring-terminal wiring method, interface/electronic-module positions and rail-bonding arrangement; agree any bus plug separately.
Recommended model families

More Siemens models

SiemensSiemens 6ES7193-7AB00-0AA0Siemens 6ES7144-1JB31-0XB0Siemens 6ES7144-1GB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02Siemens 6GK1143-0AA01

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5951-7LB21Siemens 6ES5948-3UA23Siemens 6ES5948-3UA13

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

ABBABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5112-R-ETHABB PM5072-T-ETHABB PM5072-R-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008ABB IIMKM02A

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB DO525ABB CM576-PNIOABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7193-7AA10-0AA0 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the exact itemConfirm 6ES7193-7AA10-0AA0 and its hardware markings against the installed component.
2Check the module arrangementRecord the fitted modules, their positions and the required terminal-base relationship.
3Retain the circuit drawingPreserve wire labels, bus connections and the accepted terminal assignment before work.
4Agree supplied scopeList the terminal base, any separately required electronics, connectors and quantity explicitly.
5Prepare the installationPlan isolation, mounting and conductor checks for the actual station and process conditions.
6Verify before handoverInspect the restored connections, run the agreed signal or network checks and record acceptance.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4PF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4JF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5945-7UA23

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5941-7UA12

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 6ES7193-7AA10-0AA0 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7193-7AA10-0AA0 FAQ

Which terminal mechanism is fitted to 6ES7193-7AA10-0AA0?The TM-IM/EM60C base uses spring-loaded field terminals. Select conductor preparation and ferrules for the actual terminal wiring rules; do not apply a screw-terminal tightening procedure to these connections.
Does the 4 × 4 terminal layout on 6ES7193-7AA10-0AA0 mean 16 I/O channels?It describes the physical field-terminal arrangement. The number, direction and signal type of the actual channels are established by the electronic module fitted to that position.
Can two interface modules be installed on 6ES7193-7AA10-0AA0?This base provides one interface position and one electronic-module position. A redundant two-interface arrangement needs its specified terminal-base configuration rather than using the electronic-module position as another interface slot.
Must electronics be fitted before wiring 6ES7193-7AA10-0AA0?No. Prewiring is supported. Label the intended electronic-module assignment and wire numbers clearly, then inspect seating and the completed circuits when the electronics are installed.
What is the purpose of the rail spring contact on 6ES7193-7AA10-0AA0?It provides the operational interference-discharge path to the mounting rail. In the PROFIBUS arrangement, the cable shield is connected through that path to equipotential bonding; retain the approved rail and bonding installation.
Is the plug shown with 6ES7193-7AA10-0AA0 automatically part of the order?No accessory should be assumed from the photograph alone. State the required terminal module and bus connector as separate order-scope items so that the included hardware is explicit.
Can the D-sub socket on 6ES7193-7AA10-0AA0 be used as Ethernet?No. The documented socket is the 9-pole PROFIBUS RS 485-IS connection hardware. The station network must be connected using the arrangement specified for the actual fitted interface module.
How should a field signal be assigned on 6ES7193-7AA10-0AA0?Use the terminal assignment of the installed electronic module and the accepted station circuit drawing. Terminal color and position alone do not identify a sensor supply, analog input or actuator output.
What are the bare-base dimensions of 6ES7193-7AA10-0AA0?The terminal module is 60 × 190 × 52 mm in width, height and depth. Check additional connector projection and field-wire space when planning the fully equipped station.
Can 6ES7193-7AA10-0AA0 replace a damaged base without circuit checks?Replacement still requires confirmation of the complete base identity, terminal assignments, conductor retention and module seating. Test the affected signals and the station connection before returning the process to normal operation.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens ET 200iSP

Applications & Why Choose Nordwel

Application and maintenance planning for 6ES7193-7AA10-0AA0 in the correctly matched installation.

Application areas

01Spring-terminated process wiringUse 6ES7193-7AA10-0AA0 with the correctly selected electronic module and its assigned circuits.
02Prewired station buildsPrepare and label field connections before fitting the station electronics.
03Interface-base maintenanceRestore the module seating, connector arrangement and rail-contact condition.
04Hazardous-area I/O installationsIntegrate the terminal module only within the approved ET 200iSP station and enclosure arrangement.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Retain the spring-terminal wiring method, interface/electronic-module positions and rail-bonding arrangement; agree any bus plug separately.
Need help matching 6ES7193-7AA10-0AA0 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp