other
Products
General Electric IS200ACLEH1A application control layer selection reference product views
General Electric IS200ACLEH1A application control layer selection reference product views
General Electric IS200ACLEH1A application control layer selection reference product views

General Electric IS200ACLEH1A application control layer selection reference

EMAIL SALES
General Electric EX2100
IS200ACLEH1A — application control layer selection reference

IS200ACLEH1A is offered for matched EX2100 installations. It supports selection of the application control layer in an EX2100 control assembly.

General ElectricEX2100Control-system selection
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IS200ACLEH1A product profile
Product familyEX2100
Exact modelIS200ACLEH1A
Functional contextApplication control layer
Assembly boundaryBare board and populated assembly
Configuration recordInstalled control configuration
Receiving checkRevision and fitted components
  • Brand:

    General Electric
  • Item NO.:

    IS200ACLEH1A
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IS200ACLEH1A configuration inquiry

Get a precise quote for IS200ACLEH1A

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IS200ACLEH1A functions and installation

Supports selection of the application control layer in an EX2100 control assembly. Distinguish the requested board from the complete populated control assembly. Agree whether the order is a bare board or a defined configured assembly.

Application purposeSupports selection of the application control layer in an EX2100 control assembly.
Connection arrangementDistinguish the requested board from the complete populated control assembly.
Installation preparationRetain the application configuration and connector destination map.
Operational acceptanceProve configuration loading and required control operation before process release.

Installation and selection boundaries

  • Preserve the accepted configuration and revision record.
  • Compare connector positions against the installed control drawing.
  • Match the complete code and actual fitted components.
SYSTEM SELECTION

IS200ACLEH1A system selection checks

System application EX2100 excitation control
Control layer Application control
Replacement identity Board revision and fitted assembly

GE excitation-control instructions.

Pre-order check 01

Installation environment

Prepare IS200ACLEH1A against the accepted equipment drawing and maintenance procedure.

  • Place the excitation system in its safe maintenance state before board removal.
  • Retain the application configuration and connector destination map.
  • Compare the bare board and any fitted components with the approved assembly record.
  • Prove configuration loading and required control operation before process release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Assembly level
Distinguish the requested board from the complete populated control assembly.
Application state
Preserve the accepted configuration and revision record.
Physical interfaces
Compare connector positions against the installed control drawing.
Replacement identification
Match the complete code and actual fitted components.
Delivered scope
Agree whether the order is a bare board or a defined configured assembly.
Agree whether the order is a bare board or a defined configured assembly.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF908General Electric IC600BF914General Electric IC600BF915

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF923General Electric IC600BF940General Electric IC600BF941

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF942General Electric IC600BF948General Electric IC600CB504

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB507General Electric IC600CB513General Electric IC600BF830

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Siemens / Bently NevadaSiemens 6GK1143-0TA02Bently Nevada 330130-070-01-00Siemens 6ES7143-5BF00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / SiemensVibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10Vibro-Meter S3960 AC46286 144-201-000-222Siemens 6ES7144-5KD00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / SiemensVibro-Meter TQ402 111-402-000-012Siemens 6ES7144-4PF00-0AB0Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-MeterBently Nevada 330903-00-07-10-01-00Bently Nevada 330854-080-25-05Vibro-Meter AF70982 111-412-000-012

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-MeterBently Nevada 330903-00-07-10-01-CNBently Nevada 330876-03-10-00-00Vibro-Meter CA202 144-202-000-205

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-MeterBently Nevada 330854-080-24-05Bently Nevada 330102-00-12-10-01-05Vibro-Meter CA202 144-202-000-215

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / SiemensVibro-Meter TQ902-011 111-902-000-011 A1-B1-C42-D2-E10000-F2-G9800-H10Siemens 6ES7144-1JB31-0XB0Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-Meter / SiemensBently Nevada 330103-02-04-10-02-CNVibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05Siemens 6ES7144-1GB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IS200ACLEH1A Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord IS200ACLEH1A with its complete hardware identification.
2Review the assemblyDistinguish the requested board from the complete populated control assembly.
3Capture the operating configurationPreserve the accepted configuration and revision record.
4Inspect the installationCompare the bare board and any fitted components with the approved assembly record.
5Define the order scopeAgree whether the order is a bare board or a defined configured assembly.
6Prove the restored functionProve configuration loading and required control operation before process release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Vibro-MeterTQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterVM600 RPS6U SIM-275D-24 200-582-200-013

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterTQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterCA134 144-134-000-612

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4FF01-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6GK5308-2FM10-2AA3

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IS200ACLEH1A selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IS200ACLEH1A FAQ

Where does IS200ACLEH1A belong in replacement planning?Treat it within the EX2100 application control layer. Match the installed control assembly rather than selecting from a processor-board appearance alone.
Is a populated control assembly the same supplied item as a bare board?No. The populated assembly can include additional hardware and configuration. State the exact supplied scope separately from the board identity.
What should be backed up before an application-layer replacement?Retain the accepted control configuration and its revision record before removal. Protect the original configuration until the replacement has passed acceptance.
Can the memory or processor be selected from the ACLE family name?The family name alone does not approve a processor or memory configuration. Use the actual installed assembly identification for that selection.
Which physical evidence helps identify IS200ACLEH1A during receiving?Compare the board marking, revision and fitted components with the approved assembly record. An enclosure label by itself is not a complete board identification.
Should an application-layer board be fitted while the excitation system is operating?Plan a controlled outage and safe isolation before handling the control hardware. Use the site's excitation-system maintenance procedure.
What wiring information is useful before disconnecting the assembly?Keep the connector labels and destination map with the control configuration backup so that both hardware routing and application settings can be restored.
How should a replacement application be commissioned?Restore the accepted configuration, verify system communications and prove the required control functions with process actions under the commissioning controls.
Does a similar control enclosure demonstrate interchangeability?No. The internal board revision, fitted components and application configuration must agree with the installed design.
What should the quotation for IS200ACLEH1A identify?Specify the complete requested code, bare-board or assembly scope and the installed configuration requirements, keeping any additional components explicit.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric EX2100

Applications & Why Choose Nordwel

Application and maintenance planning for IS200ACLEH1A in the correctly matched installation.

Application areas

01Excitation control maintenancePlan replacement within the accepted application-control architecture.
02Configuration preservationRetain application settings before control hardware is removed.
03Assembly receiving checksCompare fitted hardware against the controlled build record.
04Outage commissioningProve restored control functions before releasing the excitation system.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Agree whether the order is a bare board or a defined configured assembly.
Need help matching IS200ACLEH1A to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp