other
Products
Siemens 6ES7214-1HE30-0XB0 DC/DC/relay compact controller product photographs
Siemens 6ES7214-1HE30-0XB0 DC/DC/relay compact controller product photographs
Siemens 6ES7214-1HE30-0XB0 DC/DC/relay compact controller product photographs

Siemens 6ES7214-1HE30-0XB0 DC/DC/relay compact controller

EMAIL SALES
Siemens S7-1200 / CPU 1214C
6ES7214-1HE30-0XB0 — DC/DC/relay compact controller

Pairs DC input sensing with relay output switching in a compact CPU. This execution has two integrated voltage inputs and 50 KB of program/data memory.

SiemensS7-1200 / CPU 1214CDC/DC/relay compact controller
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7214-1HE30-0XB0 product profile
Product familyS7-1200 / CPU 1214C
Exact model6ES7214-1HE30-0XB0
ExecutionDC/DC/relay
Digital inputs14 at 24 V DC
Digital outputs10 relay outputs, 2 A
Program/data memory50 KB
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7214-1HE30-0XB0
6ES7214-1HE30-0XB0 configuration inquiry

Get a precise quote for 6ES7214-1HE30-0XB0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7214-1HE30-0XB0 functions and installation

For a controlled CPU change, retain the accepted project and verify the installed electrical execution. Compare terminal assignments, analog reference wiring and actual firmware before the controller is returned to service.

Program processingRuns the configured compact-controller application.
Input acquisitionReads local DC discrete signals.
Relay interfaceSwitches external circuits through relay contacts.
Analog measurementAccepts two local voltage measurement signals.

Installation and selection boundaries

  • Use the DC/DC/relay execution when reviewing the installed power and I/O arrangement.
  • Check the actual unit nameplate and approved wiring drawing before applying supply power.
  • Preserve analog input reference wiring and configured scaling.
Official product data

6ES7214-1HE30-0XB0 key specifications

Controller CPU 1214C
Execution DC/DC/relay
Digital inputs 14 at 24 V DC
Digital outputs 10 relay outputs, 2 A
Analog inputs 2, 0–10 V DC
Program/data memory 50 KB

Siemens exact-product catalogue and applicable S7 installation information.

Pre-order check 01

Installation environment

Use the installation drawing for the actual equipment and complete these checks before return to service.

  • Disconnect all relevant power sources and secure the controlled equipment before replacement.
  • Verify the actual supply terminals, polarity and nameplate before reconnecting power.
  • Separate sensor wiring from relay load wiring and retain circuit identification.
  • Compare the restored hardware configuration with the installed CPU before the functional test.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Execution
Require the DC/DC/relay arrangement specified for the existing installation.
Terminal assignment
Use the actual terminal diagram, supply identification and field-circuit commons.
Project size
Check program and data requirements against the listed integrated capacity.
Firmware
Match the actual firmware to the configured hardware version and engineering software.
Measurement
Retain voltage-input range, common reference and process scaling.
Confirm the physical nameplate, wiring and firmware; do not select a replacement by appearance alone.
Recommended model families

More Siemens models

SiemensSiemens 6ES5948-3UA13Siemens 6ES7144-4PF00-0AB0Siemens 6ES5951-7LB21

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6GK1143-0TA02Siemens 6ES5921-3WB12Siemens 6ES7143-4BF50-0AA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5470-4UC13Siemens 6ES5541-8AA11Siemens 6GK1143-0AA01

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5941-7UA12Siemens 6ES5948-3UA23Siemens 6GK5308-2FM10-2AA3

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

ABB / SiemensABB PM5072-R-ETHABB PM5132-T-ETHSiemens 6ES7144-4FF01-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / SiemensBently Nevada 330104-00-08-15-02-00Siemens 6ES5464-8ME11Siemens 6ES7144-5KD00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / SiemensBently Nevada 330851-01-000-020-10-00-00Siemens 6ES7144-4JF00-0AB0Siemens 6ES5464-8MF21

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7144-1GB31-0XB0Bently Nevada 330902-00-95-05-02-05Bently Nevada 330103-02-04-10-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / ABBBently Nevada 330905-00-25-05-02-CNBently Nevada 330130-070-01-00ABB PM5072-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-24-05Bently Nevada 330102-00-12-10-01-05Bently Nevada 330854-080-25-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / SiemensBently Nevada 330103-02-08-10-02-CNSiemens 6ES7142-6BH00-0AB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

ABB / SiemensABB V18345-1010261001ABB 3HAC061275-001Siemens 6ES7143-5BF00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7214-1HE30-0XB0 Order Guide

Check the complete requested item against the actual installation before ordering.
1Confirm the itemRecord 6ES7214-1HE30-0XB0 exactly as requested and compare the delivered nameplate.
2Describe the installationProvide the host equipment, existing connections and required supplied scope.
3Review the applicationRequire the DC/DC/relay arrangement specified for the existing installation.
4Check the electrical interfaceUse the actual terminal diagram, supply identification and field-circuit commons.
5Plan the replacementDisconnect all relevant power sources and secure the controlled equipment before replacement.
6Accept the assemblyConfirm the physical nameplate, wiring and firmware; do not select a replacement by appearance alone.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7143-5AH00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5945-7UA23

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5465-4UA13

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330130-075-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330903-00-07-10-01-CN

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330903-00-07-10-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 6ES7214-1HE30-0XB0 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7214-1HE30-0XB0 FAQ

What does DC/DC/relay mean on 6ES7214-1HE30-0XB0?It identifies a DC-supplied CPU with DC digital inputs and relay digital outputs. Check the unit nameplate and terminal diagram for the actual power connection.
What local I/O is provided by this DC/DC/relay execution?It provides 14 digital inputs, 10 relay outputs and two integrated analog voltage inputs. Additional installed modules are separate from these onboard counts.
How much integrated program/data memory should be allowed for the project?Allow for the listed 50 KB of integrated program/data memory. Use the compiled project requirements when deciding whether the application fits.
Can a current transmitter be wired directly to either built-in analog input?The integrated analog inputs are specified for 0–10 V DC, not as direct current inputs. A current-measurement arrangement needs a correctly selected interface and revised scaling.
Why should the actual firmware be recorded before replacing this controller?The same ordering code can appear in different firmware configurations. Recording the installed version lets the engineer compare the project hardware selection and the permitted restore procedure.
Do the digital output contacts provide the field load with a complete power source?Relay outputs switch the connected load circuit; the field supply and circuit protection must be arranged in the equipment wiring. Do not treat an output address as a powered load terminal.
What should be checked before reusing the existing removable terminal wiring?Check terminal numbering, conductor identification, common connections and the electrical execution. Similar appearance is not sufficient evidence that a wired connector is correctly assigned.
Will installing 6ES7214-1HE30-0XB0 by itself reproduce the machine sequence?No. The correct application and hardware configuration must also be present. Restore the approved project and verify the required behavior before releasing the machine.
How can analog replacement checks avoid an unnoticed process offset?Compare the field signal with the measured input value and the engineering-unit scaling. Check the reference conductor as well as the signal conductor before adjusting the application.
What should the handover record contain after the controller is changed?Record the complete CPU identity, firmware, accepted project revision, wiring checks and functional test result. Keep the record with the installation maintenance history.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens S7-1200 / CPU 1214C

Applications & Why Choose Nordwel

Application and maintenance planning for 6ES7214-1HE30-0XB0 in the correctly matched installation.

Application areas

01DC control cabinetsCombines DC signal acquisition with relay-based field switching.
02Small process sequencesUses the integrated analog voltage inputs alongside discrete control.
03Maintenance replacementRequires retention of the application, firmware and terminal assignments.
04Measurement verificationSupports checks of analog reference wiring and configured engineering units.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the physical nameplate, wiring and firmware; do not select a replacement by appearance alone.
Need help matching 6ES7214-1HE30-0XB0 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp