other
Products
General Electric IS200EAUXH1A auxiliary interface selection reference product views
General Electric IS200EAUXH1A auxiliary interface selection reference product views
General Electric IS200EAUXH1A auxiliary interface selection reference product views

General Electric IS200EAUXH1A auxiliary interface selection reference

EMAIL SALES
General Electric EX2100e
IS200EAUXH1A — auxiliary interface selection reference

IS200EAUXH1A is offered for matched EX2100e installations. It connects auxiliary excitation functions to the selected control arrangement.

General ElectricEX2100eControl-system selection
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IS200EAUXH1A product profile
Product familyEX2100e
Exact modelIS200EAUXH1A
Application contextAuxiliary excitation interfaces
Control-group contextH1 / M1-M2-C arrangement
Installation evidenceAuxiliary-circuit connection map
Acceptance taskCommand and status verification
  • Brand:

    General Electric
  • Item NO.:

    IS200EAUXH1A
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IS200EAUXH1A configuration inquiry

Get a precise quote for IS200EAUXH1A

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IS200EAUXH1A functions and installation

Connects auxiliary excitation functions to the selected control arrangement. Match the H1 context to the installed M1, M2 and C arrangement. Distinguish the auxiliary board from contactors, cables and optional daughterboards.

Application purposeConnects auxiliary excitation functions to the selected control arrangement.
Connection arrangementMatch the H1 context to the installed M1, M2 and C arrangement.
Installation preparationPreserve the auxiliary command/status drawing and control-section mapping.
Operational acceptanceVerify auxiliary commands, returned status and control communications before release.

Installation and selection boundaries

  • Retain the approved command, relay and status assignments.
  • Identify any fitted daughterboard independently in the supply scope.
  • Use the installed circuit drawing for terminal-level restoration.
SYSTEM SELECTION

IS200EAUXH1A system selection checks

System application EX2100e
Interface family EAUX auxiliary interface
H1 group context M1, M2 and C control sections

GE excitation-control instructions.

Pre-order check 01

Installation environment

Prepare IS200EAUXH1A against the accepted equipment drawing and maintenance procedure.

  • Safely isolate excitation equipment and the connected auxiliary circuits.
  • Preserve the auxiliary command/status drawing and control-section mapping.
  • Inspect connectors and any optional daughterboard arrangement.
  • Verify auxiliary commands, returned status and control communications before release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Control sections
Match the H1 context to the installed M1, M2 and C arrangement.
Auxiliary circuits
Retain the approved command, relay and status assignments.
Optional hardware
Identify any fitted daughterboard independently in the supply scope.
Connection evidence
Use the installed circuit drawing for terminal-level restoration.
Order scope
Distinguish the auxiliary board from contactors, cables and optional daughterboards.
Distinguish the auxiliary board from contactors, cables and optional daughterboards.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600CB507General Electric IC600CB513General Electric IC600BF830

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF908General Electric IC600BF914General Electric IC600BF915

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF923General Electric IC600BF940General Electric IC600BF941

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF942General Electric IC600BF948General Electric IC600CB504

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Siemens / Bently Nevada / Vibro-MeterSiemens 6ES7143-5AH00-0BA0Bently Nevada 330903-00-07-10-01-CNVibro-Meter AF70982 111-412-000-012

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Siemens / Vibro-MeterBently Nevada 330854-080-25-05Siemens 6ES7144-1JB31-0XB0Vibro-Meter VM600 RPS6U SIM-275D-24 200-582-200-013

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Vibro-Meter / Bently NevadaSiemens 6ES7143-4BF50-0AA0Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C42-D2-E10000-F2-G9800-H10Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05Vibro-Meter CA202 144-202-000-205Vibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / Bently NevadaVibro-Meter S3960 AC46286 144-201-000-222Bently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7142-6BH00-0AB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-MeterBently Nevada 330854-080-24-05Vibro-Meter CA202 144-202-000-215Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently Nevada / Vibro-MeterSiemens 6ES7144-4PF00-0AB0Bently Nevada 330102-00-12-10-01-05Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IS200EAUXH1A Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord IS200EAUXH1A with its complete hardware identification.
2Review the assemblyMatch the H1 context to the installed M1, M2 and C arrangement.
3Capture the operating configurationRetain the approved command, relay and status assignments.
4Inspect the installationInspect connectors and any optional daughterboard arrangement.
5Define the order scopeDistinguish the auxiliary board from contactors, cables and optional daughterboards.
6Prove the restored functionVerify auxiliary commands, returned status and control communications before release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Vibro-MeterTQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterTQ402 111-402-000-012

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterCA134 144-134-000-612

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4FF01-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IS200EAUXH1A selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IS200EAUXH1A FAQ

What kind of excitation functions are associated with IS200EAUXH1A?The EAUX family interfaces auxiliary functions within EX2100e. Match the installed auxiliary circuits and control arrangement during replacement planning.
What control-group context is associated with H1?The H1 group is identified with the M1, M2 and C control sections in the redundant arrangement. Preserve the accepted control-section mapping.
Is the auxiliary interface itself a complete field power converter?No. It is an interface within the excitation architecture. Power conversion, contactor loads and auxiliary signal handling remain separate responsibilities.
Why retain the contactor and relay connection map?Those destinations establish the installed auxiliary command and status paths. Replacing the interface requires restoring the accepted circuit assignments.
Does an optional daughterboard come with every EAUX item?Specify any daughterboard option separately in the order scope. Do not assume that a pictured or installed option is included with a board-only order.
How should a ground-detection interface be reviewed during replacement?Keep the installed ground-detection circuit and its signal routing with the auxiliary-interface drawing, then verify the restored status under the acceptance procedure.
What should be checked before an H1 auxiliary-interface spare is accepted?Compare complete marking, control-section association and connector condition with the installed assembly record.
Can the auxiliary interface be rewired from a system overview alone?Use the accepted installation wiring and circuit assignments. A system overview explains function but does not replace the terminal-level connection record.
What equipment state is required before changing the auxiliary interface?Place the excitation and connected auxiliary circuits in their safe maintenance state and use ESD-safe board handling.
Which checks complete the auxiliary-interface restoration?Verify the required command paths, returned statuses and control-section communications before normal excitation operation is released.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric EX2100e

Applications & Why Choose Nordwel

Application and maintenance planning for IS200EAUXH1A in the correctly matched installation.

Application areas

01Excitation auxiliariesSupport the accepted command and status interface arrangement.
02Redundant control maintenancePreserve the selected control-section associations.
03Auxiliary wiring restorationKeep circuit destinations with the replacement record.
04System handoverProve the restored auxiliary functions before operation resumes.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Distinguish the auxiliary board from contactors, cables and optional daughterboards.
Need help matching IS200EAUXH1A to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp