other
Products
General Electric IS200EBKPG1A redundant control assembly backplane product views
General Electric IS200EBKPG1A redundant control assembly backplane product views
General Electric IS200EBKPG1A redundant control assembly backplane product views

General Electric IS200EBKPG1A redundant control assembly backplane

EMAIL SALES
General Electric EX2100
IS200EBKPG1A — redundant control assembly backplane

IS200EBKPG1A is offered for matched EX2100 installations. It provides interconnection hardware in the redundant excitation control assembly.

General ElectricEX2100redundant control assembly backplane
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IS200EBKPG1A product profile
Product familyEX2100
Exact modelIS200EBKPG1A
Assembly purposeRedundant control interconnection
Component boundaryBackplane, separate from fitted boards
Installation recordBoard positions and tool connections
Physical acceptanceMating contacts and support points
  • Brand:

    General Electric
  • Item NO.:

    IS200EBKPG1A
IS200EBKPG1A configuration inquiry

Get a precise quote for IS200EBKPG1A

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IS200EBKPG1A functions and installation

Provides interconnection hardware in the redundant excitation control assembly. Match the backplane to the installed redundant EX2100 control arrangement. Specify backplane, fitted boards, cables and mounting parts independently.

Application purposeProvides interconnection hardware in the redundant excitation control assembly.
Connection arrangementMatch the backplane to the installed redundant EX2100 control arrangement.
Installation preparationRecord board positions and the complete cable/tool connection arrangement.
Operational acceptanceProve control communications and the required redundant state before process release.

Installation and selection boundaries

  • Retain each fitted control-board identity and assigned position.
  • Restore cable and tool connections from the accepted assembly drawing.
  • Keep fitted-board processor and network characteristics separate from the backplane.
Official product data

IS200EBKPG1A key specifications

System application EX2100 excitation control
Assembly arrangement Redundant control assembly
Hardware role Control-assembly backplane
Configuration evidence Installed board and connection map
Supplied component Backplane hardware

GE excitation-control instructions.

Pre-order check 01

Installation environment

Prepare IS200EBKPG1A against the accepted equipment drawing and maintenance procedure.

  • Place the redundant excitation assembly in its safe maintenance state.
  • Record board positions and the complete cable/tool connection arrangement.
  • Inspect backplane contacts and board supports before reassembly.
  • Prove control communications and the required redundant state before process release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Assembly architecture
Match the backplane to the installed redundant EX2100 control arrangement.
Board positions
Retain each fitted control-board identity and assigned position.
Connection map
Restore cable and tool connections from the accepted assembly drawing.
Processing boundary
Keep fitted-board processor and network characteristics separate from the backplane.
Supplied assembly
Specify backplane, fitted boards, cables and mounting parts independently.
Specify backplane, fitted boards, cables and mounting parts independently.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600CB513General Electric IC600BF830General Electric IC600BF908

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF914General Electric IC600BF915General Electric IC600BF923

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF940General Electric IC600BF941General Electric IC600BF942

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF948General Electric IC600CB504General Electric IC600CB507

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Siemens / Bently NevadaSiemens 6ES7144-1GB31-0XB0Bently Nevada 330854-080-24-05Bently Nevada 330903-00-07-10-01-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0Siemens 6ES7142-6BH00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / Vibro-MeterBently Nevada 330103-02-08-10-02-CNVibro-Meter CA202 144-202-000-215Vibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Vibro-MeterSiemens 6ES7143-4BF50-0AA0Vibro-Meter CA134 144-134-000-612Vibro-Meter S3960 AC46286 144-201-000-222

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7143-5BF00-0BA0Siemens 6GK5308-2FM10-2AA3Bently Nevada 330903-00-07-10-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / SiemensVibro-Meter CA202 144-202-000-205Siemens 6ES7144-4FF01-0AB0Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6GK1143-0TA02Bently Nevada 330103-02-04-10-02-CNBently Nevada 330854-080-25-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IS200EBKPG1A Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord IS200EBKPG1A with its complete hardware identification.
2Review the assemblyMatch the backplane to the installed redundant EX2100 control arrangement.
3Capture the operating configurationRetain each fitted control-board identity and assigned position.
4Inspect the installationInspect backplane contacts and board supports before reassembly.
5Define the order scopeSpecify backplane, fitted boards, cables and mounting parts independently.
6Prove the restored functionProve control communications and the required redundant state before process release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Vibro-MeterTQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterTQ902-011 111-902-000-011 A1-B1-C42-D2-E10000-F2-G9800-H10

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterTQ402 111-402-000-012

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterAF70982 111-412-000-012

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-1JB31-0XB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5AH00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IS200EBKPG1A selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IS200EBKPG1A FAQ

What is the hardware purpose of IS200EBKPG1A?It is the backplane in the redundant EX2100 control assembly. It provides the assembly interconnection rather than the processing function of fitted boards.
Does the EBKP backplane include every illustrated controller board?No. Illustrated fitted boards and the backplane are different supply items. Define which boards, cables and support hardware the order includes.
What information should be retained before removing an EBKP assembly?Retain board positions, cable destinations and the accepted tool-connection arrangement so that the complete control assembly can be restored.
Is the installed processor rating a specification of the backplane?No. A fitted processor's capacity belongs to that active component, not to the backplane interconnection hardware.
Why must redundant control positions remain identified?Position mapping preserves the accepted relationship of the control sections. Moving hardware without that record can change the intended assembly arrangement.
How should the backplane's mating contacts be inspected?Check for damage, contamination and alignment before refitting boards. Do not use force to compensate for misaligned connectors.
Can a spare be accepted from its EBKP marking alone?Compare the full group/revision identity and installed assembly record as well as the family marking before approving the spare.
What precautions apply while handling the redundant control assembly?Safely isolate the excitation equipment, preserve its configuration and use ESD-safe handling for the backplane and all removed boards.
How is the restored redundant assembly checked?Confirm board seating and required control communications, then prove the intended redundant operating state under the commissioning plan.
How does a maintenance computer connect through IS200EBKPG1A?The backplane's maintenance-tool connection uses the specified RS-232C cable. Select the connector for the intended control section and preserve its approved cable assignment; this service connection is distinct from the system's normal data-highway connection.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric EX2100

Applications & Why Choose Nordwel

Application and maintenance planning for IS200EBKPG1A in the correctly matched installation.

Application areas

01Redundant excitation assemblyInterconnect the accepted control hardware arrangement.
02Backplane maintenanceRestore contact integrity and board support during a planned outage.
03Assembly traceabilityPreserve fitted-board and connection records with the spare.
04Controlled restorationVerify communications and redundant operating state before handover.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Specify backplane, fitted boards, cables and mounting parts independently.
Need help matching IS200EBKPG1A to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp