other
Products
Bently Nevada 330104-00-04-90-02-00 armored M10 proximity probe product photographs
Bently Nevada 330104-00-04-90-02-00 armored M10 proximity probe product photographs
Bently Nevada 330104-00-04-90-02-00 armored M10 proximity probe product photographs

Bently Nevada 330104-00-04-90-02-00 armored M10 proximity probe

EMAIL SALES
Bently Nevada 3300 XL 8 mm
330104-00-04-90-02-00 — armored M10 proximity probe

Uses an armored lead and metric mounting thread for non-contact proximity measurement. The ordering configuration specifies a 40 mm case, no unthreaded section and a 9 m total length.

Bently Nevada3300 XL 8 mmarmored M10 proximity probe
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
330104-00-04-90-02-00 product profile
Product family3300 XL 8 mm
Exact model330104-00-04-90-02-00
Case threadM10 × 1
Overall case length40 mm
Unthreaded length0 mm
Total length9.0 m
  • Brand:

    Bently Nevada
  • Item NO.:

    330104-00-04-90-02-0
330104-00-04-90-02-00 configuration inquiry

Get a precise quote for 330104-00-04-90-02-00

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

330104-00-04-90-02-00 functions and installation

Start with mechanical fit and the complete lead configuration, then check the matched transducer arrangement. Installation acceptance should include the target, operating gap and connector protection.

Measurement roleDetects probe-to-target distance without contact.
Mounting interfaceUses an M10 × 1 threaded case.
Cable protectionIncludes armor on the probe lead.
System matchingRequires the correctly matched proximity transducer installation.

Installation and selection boundaries

  • The 40 mm case length and 9 m total length describe different physical dimensions.
  • The connector/cable option uses standard cable, not FluidLoc cable.
  • Do not add optional hazardous-area approvals to the 00 approval configuration.
Official product data

330104-00-04-90-02-00 key specifications

Probe construction 8 mm proximity probe with armor
Case thread M10 × 1
Unthreaded length 0 mm
Overall case length 40 mm
Total length 9.0 m
Connector Miniature coaxial ClickLoc
Cable Standard cable
Connector protector option Not selected
Agency approval option 00 — not required

Bently Nevada 3300 XL 8 mm Proximity Transducer System, datasheet 141194 Rev. AN, ordering information and installation limits.

Pre-order check 01

Installation environment

Use the installation drawing for the actual equipment and complete these checks before return to service.

  • Secure the machinery before installing the probe or setting its operating gap.
  • Check the M10 × 1 mounting thread and avoid forcing the case into an unsuitable thread.
  • Route the armored lead without excessive bending, crushing or pulling at the termination.
  • Connect the matched transducer system and verify the operating gap before the measurement is accepted.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Complete configuration
Require the full probe ordering code, including the connector and approval options.
Mechanical fit
Check metric thread, case length and available mounting clearance.
Cable arrangement
Match the 9 m total length to the intended transducer system arrangement.
Connector protection
Review the ClickLoc connection and the environmental protection required at the joint.
Target and setup
Verify target material, installed geometry and operating gap against the system requirements.
Match the complete probe configuration and installed transducer system before accepting the measurement.
Recommended model families

More Bently Nevada models

Bently NevadaBently Nevada 330906-02-12-10-02-05Bently Nevada 330905-00-25-05-02-CNBently Nevada 330854-080-24-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330102-00-12-10-01-05Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-01-50-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330130-075-01-00Bently Nevada 330103-02-08-10-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330902-00-95-05-02-05Bently Nevada 330876-03-10-00-00Bently Nevada 330104-00-08-15-02-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently Nevada / SiemensBently Nevada 330130-070-01-00Siemens 6ES5945-7UA23Siemens 6GK1143-0TA02

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / ABBSiemens 6ES5941-7UA12ABB V18345-1010261001ABB PM5112-R-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABB / Bently Nevada / SiemensABB PM5072-R-ETHBently Nevada 330854-080-25-05Siemens 6ES7143-4BF50-0AA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5951-7LB21Siemens 6ES5465-4UA13Siemens 6GK1143-0AA01

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7144-1JB31-0XB0Siemens 6ES7144-5KD00-0BA0Bently Nevada 330103-02-04-10-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / ABBSiemens 6ES7144-4PF00-0AB0ABB PM5132-T-ETHSiemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / ABBSiemens 6ES5541-8AA11ABB PM5072-T-ETHSiemens 6ES5948-3UA23

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7142-6BH00-0AB0Siemens 6GK5308-2FM10-2AA3Bently Nevada 330851-01-000-020-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

330104-00-04-90-02-00 Order Guide

Check the complete requested item against the actual installation before ordering.
1Confirm the itemRecord 330104-00-04-90-02-00 exactly as requested and compare the delivered nameplate.
2Describe the installationProvide the host equipment, existing connections and required supplied scope.
3Review the applicationRequire the full probe ordering code, including the connector and approval options.
4Check the electrical interfaceCheck metric thread, case length and available mounting clearance.
5Plan the replacementSecure the machinery before installing the probe or setting its operating gap.
6Accept the assemblyMatch the complete probe configuration and installed transducer system before accepting the measurement.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4JF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4FF01-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-1GB31-0XB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5948-3UA13

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5921-3WB12

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 330104-00-04-90-02-00 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

330104-00-04-90-02-00 FAQ

What mounting thread is specified for 330104-00-04-90-02-00?The probe has an M10 × 1 case thread. Check the mating thread and installation engagement rather than substituting an inch-thread mounting arrangement.
What do the 00 and 04 length fields represent?They specify a 0 mm unthreaded section and a 40 mm overall case length. These dimensions relate to the probe case, not to the full lead length.
How long is the complete probe assembly in this configuration?The total length option is 9.0 m. The case length is a separate dimension and must not be used as the cable or transducer system length.
Does this item include armor on the probe lead?Yes. The base probe construction is the armored metric version. Route the lead so that armor is not used as a reason to permit crushing, severe bending or pulling at the termination.
Is the selected cable the liquid-blocking FluidLoc option?No. The 02 connector/cable option specifies standard cable with a miniature coaxial ClickLoc connector. Do not describe it as a FluidLoc configuration.
Is a connector protector selected by this ordering code?No. The selected connector option is not the factory connector-protector option. Review the environmental protection required for the installed connection separately.
Does the final 00 code specify the optional hazardous-area approval package?No. The final 00 is the agency-approval option marked not required. Do not treat that configuration as proof of the optional CSA, ATEX or IECEx approvals.
Can the probe by itself provide a complete displacement measurement output?No. It is a component of a proximity transducer system. The probe, appropriate connection arrangement and matched Proximitor sensor must form the correct installed system.
What is the safe tightening approach for matching XL ClickLoc connections?Use finger-tight engagement for matching XL ClickLoc connectors; do not add wrench torque. Protect the connector and verify the completed connection before accepting the measurement.
What should be checked when a replacement probe gives a changed reading?Check the operating gap, target material, mechanical alignment, connection condition and matched system length. Secure the machinery and verify the complete measurement setup before judging the probe alone.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3300 XL 8 mm

Applications & Why Choose Nordwel

Application and maintenance planning for 330104-00-04-90-02-00 in the correctly matched installation.

Application areas

01Shaft proximity measurementProvides non-contact probe-to-target distance sensing in the matched system.
02Metric probe mountingUses a specified case thread and length for mechanical selection.
03Armored lead routingRequires controlled routing and protected connector installation.
04Transducer maintenanceSupports configuration and operating-gap checks after replacement.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Match the complete probe configuration and installed transducer system before accepting the measurement.
Need help matching 330104-00-04-90-02-00 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp