other
Products
General Electric IC610CBL105 10-foot field I/O interface cable product views
General Electric IC610CBL105 10-foot field I/O interface cable product views
General Electric IC610CBL105 10-foot field I/O interface cable product views

General Electric IC610CBL105 10-foot field I/O interface cable

EMAIL SALES
General Electric Series One
IC610CBL105 — 10-foot field I/O interface cable

Connect compatible 16-circuit Series One I/O modules to the field wiring through the 24-pin interface cable. Use the original pin and wire-color mapping when terminating the prepared free ends.

General ElectricSeries One10-foot field I/O interface cable
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC610CBL105 product profile
Product familySeries One
Exact modelIC610CBL105
Cable length10 ft / approximately 3 m
Module end24-pin female connector
Field endStripped and tinned conductors
Wire identificationColor coded
  • Brand:

    General Electric
  • Item NO.:

    IC610CBL105
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IC610CBL105 configuration inquiry

Get a precise quote for IC610CBL105

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC610CBL105 functions and installation

IC610CBL105 is a 10 ft, approximately 3 m, I/O interface cable with a 24-pin female module connector and stripped, tinned field-wire ends. It serves the corresponding connector-equipped I/O modules rather than a programming or serial communication port.

Field wiring interfaceConnects supported I/O module terminals to field devices.
Module matingUses the corresponding 24-pin faceplate connection.
Wire identificationFollow the documented color and pin mapping.
Signal verificationCheck continuity, commons and assigned field circuits.

Installation and selection boundaries

  • Use the original Figure 6-3 pin and conductor-color mapping.
  • A 24-pin connector does not imply 24 independent I/O channels.
  • Verify the connected module electrical type and field circuit before energizing.
Official product data

IC610CBL105 key specifications

Cable purpose Field I/O interface connection
Length 10 ft / approximately 3 m
Module-side connector 24-pin female
Mating module connection Corresponding 24-pin male faceplate connector
Field termination Stripped and tinned free conductors
Wire identification Color-coded conductors
I/O context Supported connector-equipped 16-circuit I/O modules

GEK-90842 Series One user manual, I/O Specifications and Wiring, Figure 6-3; original-manual archive approved by the user.

Pre-order check 01

Installation environment

Prepare the fitted Series One installation for a controlled exchange.

  • Secure connected actuators and isolate affected I/O and field-power circuits before cable work.
  • Record the module connector, wire colors, commons and terminal assignments.
  • Route the cable without mechanical strain and terminate the prepared conductors to the approved wiring list.
  • Check continuity and circuit assignments, then test the required field inputs or outputs under controlled conditions.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Module connection
Match the supported 16-circuit module and its 24-pin male faceplate connector.
Signal function
Verify input or output circuit type against the actual fitted I/O module.
Pin mapping
Retain the documented conductor colors, signal allocation and common connections.
Cable route
Check the supplied length, connector access and field-terminal routing.
Acceptance test
Confirm continuity and the actual field-signal behavior before load release.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF942General Electric IC600BF948General Electric IC600CB504

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB507General Electric IC600CB513General Electric IC600CB516

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB525General Electric IC600CB536General Electric IC600CB537

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF830General Electric IC600BF908General Electric IC600BF914

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

ABBABB DO525ABB CM576-PNIOABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-4JF00-0AB0Siemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC610CBL105 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRetain IC610CBL105 and the fitted revision when agreeing the replacement.
2Match the installed roleMatch the supported 16-circuit module and its 24-pin male faceplate connector.
3Record connectionsRecord the module connector, wire colors, commons and terminal assignments.
4Review operating limitsUse the original Figure 6-3 pin and conductor-color mapping.
5Agree the supplied scopeConfirm continuity and the actual field-signal behavior before load release.
6Validate restorationCheck continuity and circuit assignments, then test the required field inputs or outputs under controlled conditions.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC600BF915

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF923

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF940

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF941

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-4BF50-0AA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7142-6BH00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IC610CBL105 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC610CBL105 FAQ

What is the length of IC610CBL105?The cable is 10 ft long, approximately 3 m. Check the actual route and terminal access so the installation does not place strain on the module connector.
Which connector is fitted at the I/O module end?It has a 24-pin female connector that mates with the corresponding male connector on the supported module faceplate. Verify the actual module connection before ordering.
How is the field end prepared for wiring?The free conductors are stripped and tinned for connection to user field devices or terminals. Preserve the documented wire identification during termination.
Is this cable intended for controller programming?No. It is a field I/O interface cable for the corresponding connector-equipped modules. Do not use its connector appearance as evidence of a programming or serial communication function.
Does the 24-pin plug provide 24 independent signal channels?The connector contact count is not the I/O channel count. The documented application is to supported 16-circuit modules with signal and common connections assigned by the wiring list.
Which mapping should be used for the color-coded leads?Use the original I/O interface cable wiring list in Figure 6-3. Match pin, conductor color/marking, signal and common together rather than creating a new color sequence.
Can the same cable connection establish the electrical rating of an I/O circuit?The electrical requirements come from the fitted I/O module and connected field device. A mating cable does not set the input voltage, switching current or load rating.
What should be checked before reusing existing field terminations?Compare the module circuit assignment, conductor colors, commons and field-terminal labels with the approved wiring list. Confirm the input/output technology of the actual module as a separate check.
How should the cable be supported during installation?Plan the route and terminal access so the connector and individual conductors are not under mechanical strain. Keep the field-circuit identification visible for maintenance and continuity checks.
What acceptance test is appropriate after this cable is replaced?Check continuity and the intended pin-to-terminal assignments before energizing. Then verify the actual field inputs or controlled output response; communication-port diagnostics are not a cable acceptance test here.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series One

Applications & Why Choose Nordwel

Application and maintenance planning for IC610CBL105 in the correctly matched installation.

Application areas

01Connector-equipped I/O modulesConnect the supported module faceplate to field circuits.
02Terminal-panel wiringRoute identified free conductors to the approved terminal assignments.
03Field cable replacementPreserve pin, color and common mappings during maintenance.
04Signal acceptanceVerify continuity and actual I/O behavior before process release.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Need help matching IC610CBL105 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp