other
Products
Vibro-Meter 200-582-300-013 48 VDC rack power supply product views
Vibro-Meter 200-582-300-013 48 VDC rack power supply product views
Vibro-Meter 200-582-300-013 48 VDC rack power supply product views

Vibro-Meter 200-582-300-013 48 VDC rack power supply

EMAIL SALES
Vibro-Meter VM600
200-582-300-013 — 48 VDC rack power supply

200-582-300-013 is offered for matched VM600 installations. It supports the accepted rack power arrangement.

Vibro-MeterVM60048 VDC rack power supply
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
200-582-300-013 product profile
Product familyVM600
Exact model200-582-300-013
Component purposeRack power supply
Installed comparisonPower source and rack loading
Connection recordAccepted supply drawing
Return-to-service checkRack power and module status
  • Brand:

    Others
  • Item NO.:

    200-582-300-013
200-582-300-013 configuration inquiry

Get a precise quote for 200-582-300-013

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

200-582-300-013 functions and installation

Supports the accepted rack power arrangement. Match the complete supply item to the installed rack and power arrangement. Specify supply, power-connection hardware and accessories individually.

Application purposeSupports the accepted rack power arrangement.
Connection arrangementMatch the complete supply item to the installed rack and power arrangement.
Installation preparationPreserve the accepted input connection and rack-loading record.
Operational acceptanceCheck power status and required rack functions before operational release.

Installation and selection boundaries

  • Check the actual feed against the accepted input specification.
  • Preserve the approved installed rack-load calculation.
  • Identify the power backplane separately from the supply module.
Official product data

200-582-300-013 key specifications

System application VM600 rack power
Component class Rack power supply
Mechanical form Plug-in rack module
Nominal input class 48 VDC

Vibro-Meter VM600 product and system documentation.

Pre-order check 01

Installation environment

Prepare 200-582-300-013 against the accepted equipment drawing and maintenance procedure.

  • Identify all relevant sources and isolate the affected rack power arrangement.
  • Preserve the accepted input connection and rack-loading record.
  • Inspect supply seating and power-contact condition.
  • Check power status and required rack functions before operational release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Rack association
Match the complete supply item to the installed rack and power arrangement.
Source identification
Check the actual feed against the accepted input specification.
Loading
Preserve the approved installed rack-load calculation.
Rear connection
Identify the power backplane separately from the supply module.
Order scope
Specify supply, power-connection hardware and accessories individually.
Specify supply, power-connection hardware and accessories individually.
Recommended model families

More Vibro-Meter models

Vibro-MeterVibro-Meter VM600 RPS6U SIM-275D-24 200-582-200-013Vibro-Meter S3960 AC46286 144-201-000-222Vibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter TQ402 111-402-000-012Vibro-Meter AF70982 111-412-000-012Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter CA134 144-134-000-612Vibro-Meter CA202 144-202-000-215Vibro-Meter CA202 144-202-000-205

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Siemens / General ElectricSiemens 6ES7143-4BF50-0AA0General Electric IC600CB504General Electric IC600BF942

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7144-1GB31-0XB0Bently Nevada 330876-03-10-00-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric IC600BF941General Electric IC600CB513Siemens 6ES7144-4FF01-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / SiemensBently Nevada 330854-080-25-05Siemens 6ES7144-4PF00-0AB0Siemens 6ES7143-5BF00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / General ElectricBently Nevada 330103-02-04-10-02-CNBently Nevada 330104-00-08-15-02-00General Electric IC600BF915

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / General Electric / SiemensBently Nevada 330130-075-01-00General Electric IC600BF830Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / General Electric / SiemensBently Nevada 330903-00-07-10-01-CNGeneral Electric IC600BF908Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / Bently NevadaGeneral Electric IC600BF940Bently Nevada 330854-080-24-05General Electric IC600BF948

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

200-582-300-013 Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord 200-582-300-013 with its complete hardware identification.
2Review the assemblyMatch the complete supply item to the installed rack and power arrangement.
3Capture the operating configurationCheck the actual feed against the accepted input specification.
4Inspect the installationInspect supply seating and power-contact condition.
5Define the order scopeSpecify supply, power-connection hardware and accessories individually.
6Prove the restored functionCheck power status and required rack functions before operational release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6GK5308-2FM10-2AA3

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5AH00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7142-6BH00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6GK1143-0TA02

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF914

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 200-582-300-013 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

200-582-300-013 FAQ

Which input class identifies 200-582-300-013?The historical VM600 configuration list identifies it as a 48 VDC rack power-supply version. Match the actual installation to that input class.
How should 200-582-300-013 be protected after removal from the rack?Place the removed module in suitable antistatic protective packaging and protect its connectors from contact or impact. Keep it identified as the removed spare while it is stored or transported; do not leave exposed electronics on an ordinary work surface.
What should be confirmed at the installation's DC feed?Confirm the accepted DC-feed identification, polarity and protective arrangement against the installed supply drawing before reconnecting the rack.
Does the nominal 48 VDC label establish the entire allowable input range?The nominal class is not a complete tolerance or operating-range specification. Use the accepted installed supply specification for the source check.
What information is needed to plan an outage for this supply?Record the rack's power sources, installed modules and any accepted redundant arrangement before defining which circuits require isolation.
How should the rack supply and rear power connections be inspected?Check their identification, seating and contact condition separately, making sure the power backplane is not confused with the supply module.
Can the available rack load be inferred from another supply generation?Retain the accepted loading calculation for this installation. Do not use another generation's output capacity as the loading basis.
What receiving check is specific to the 48 VDC replacement request?Compare the complete historical marking and the 48 VDC input identity, along with condition and agreed accessory scope.
What should happen before connected machinery is released after power restoration?Check the restored rack power state and affected monitoring/status functions under the approved system acceptance procedure.
Which supplied items should be itemized for 200-582-300-013?Itemize the power-supply module, any required power-connection hardware and other accessories rather than treating them as one assumed assembly.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Vibro-Meter VM600

Applications & Why Choose Nordwel

Application and maintenance planning for 200-582-300-013 in the correctly matched installation.

Application areas

01Rack power maintenanceRestore the selected machinery-monitoring rack supply arrangement.
02Outage planningIdentify every feed before the supply is disturbed.
03Spare receivingCompare full supply identity and contact condition with the approved spare record.
04System restorationValidate power status and affected monitoring functions.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Specify supply, power-connection hardware and accessories individually.
Need help matching 200-582-300-013 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp