other
Products
General Electric IC600PM502 Standard I/O-rack AC power supply product views
General Electric IC600PM502 Standard I/O-rack AC power supply product views
General Electric IC600PM502 Standard I/O-rack AC power supply product views

General Electric IC600PM502 Standard I/O-rack AC power supply

EMAIL SALES
General Electric Series Six
IC600PM502 — Standard I/O-rack AC power supply

Provide the standard Series Six I/O rack with its +5 V backplane supply. Match the fitted power-supply revision and AC input selection before reconnecting the rack.

General ElectricSeries SixStandard I/O-rack AC power supply
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600PM502 product profile
Product familySeries Six
Exact modelIC600PM502
Rack applicationStandard I/O rack
Backplane output+5 VDC
Front controlLOGIC POWER switch
Power supervisionPSOK power-failure signal
  • Brand:

    General Electric
  • Item NO.:

    IC600PM502
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IC600PM502 configuration inquiry

Get a precise quote for IC600PM502

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC600PM502 functions and installation

IC600PM502 is the standard I/O-rack power-supply configuration. The GEK-84868B installation data describes 115/230 VAC input selection by a terminal-block jumper; that revision-specific arrangement must be checked against the actual unit before installation.

I/O rack supplyFeeds the standard I/O backplane power circuit.
Input selectionCheck the fitted revision and required AC jumper arrangement.
Logic power controlPreserve the front LOGIC POWER control and wiring.
Failure supervisionInclude the PSOK signal in the rack diagnostic review.

Installation and selection boundaries

  • Verify revision and input selection before applying AC power.
  • The standard backplane supply is +5 VDC; do not assign high-capacity multi-rail outputs to it.
  • A local LOGIC POWER switch is not the complete installation isolation procedure.
Official product data

IC600PM502 key specifications

Rack application Standard Series Six I/O rack
Backplane output +5 VDC
Documented input modes 115 VAC or 230 VAC, with GEK-84868B revision-specific selection
Documented input frequency 47–63 Hz under the applicable revision data
Front switch LOGIC POWER
Front indication POWER
Supervision signal PSOK power-failure indication

GEK-84868B Standard I/O Rack data in the user-approved GEK-25367E archive; input selection is revision dependent.

Pre-order check 01

Installation environment

Prepare the fitted Series Six installation for a controlled exchange.

  • Stop and secure the system, isolate all relevant supplies and verify safe conditions before removing the power unit.
  • Record AC terminals, ground, backplane leads and the fitted input-selection arrangement.
  • Match the standard I/O-rack role and revision-specific supply configuration.
  • Restore connections and input selection, then check POWER, rack diagnostics and controlled I/O operation.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Rack type
Match the standard I/O rack rather than a processor or high-capacity supply arrangement.
Revision
Compare the fitted revision with the applicable installation data.
AC selection
Verify the correct input-mode jumper or selection method for that revision.
Backplane and supervision
Preserve the +5 V supply connections and PSOK circuit.
Installed wiring
Agree the terminal arrangement, internal leads and replacement scope before removal.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF914General Electric IC600BF915General Electric IC600BF923

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF940General Electric IC600BF941General Electric IC600BF942

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF948General Electric IC600CB504General Electric IC600CB507

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB513General Electric IC600CB516General Electric IC600CB525

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5112-R-ETHABB PM5072-T-ETHABB PM5072-R-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008ABB IIMKM02A

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB DO525ABB CM576-PNIOABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600PM502 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRetain IC600PM502 and the fitted revision when agreeing the replacement.
2Match the installed roleMatch the standard I/O rack rather than a processor or high-capacity supply arrangement.
3Record connectionsRecord AC terminals, ground, backplane leads and the fitted input-selection arrangement.
4Review operating limitsVerify revision and input selection before applying AC power.
5Agree the supplied scopeAgree the terminal arrangement, internal leads and replacement scope before removal.
6Validate restorationRestore connections and input selection, then check POWER, rack diagnostics and controlled I/O operation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC600BF830

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF908

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600CB536

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600CB537

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IC600PM502 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600PM502 FAQ

What does IC600PM502 power in a Series Six installation?It supplies the standard I/O rack. The processor-rack and high-capacity power arrangements must be reviewed separately rather than treated as the same product.
Which output voltage belongs to the standard I/O supply?The standard backplane supply provides +5 VDC. Do not add the extra output rails of a different power-supply class to this configuration.
How is the AC input mode selected in the GEK-84868B installation?That revision uses a jumper on the front terminal block to select the 115 VAC or 230 VAC mode. Confirm the actual unit revision and jumper arrangement before connecting power.
Can the B-revision input-selection procedure be assumed for every earlier unit?Compare the fitted revision first. Changes in input selection and replacement procedure must be matched to the actual power unit rather than carried over automatically.
What is the purpose of the front LOGIC POWER switch?It controls the rack logic-power supply. Use the required system isolation procedure before electrical work; the front switch alone is not evidence that all affected circuits are safe.
Which power-failure signal is associated with the I/O supply?The supply generates PSOK power supervision. Check that signal and the rack diagnostic response as part of acceptance after restoring power.
What should be documented before backplane leads are removed?Record their terminal locations, markings and routing, together with the incoming AC and ground connections. This prevents an otherwise correct supply from being installed with an incorrect internal connection.
Does a matching physical size prove a replacement supply is suitable?No. The rack class, output arrangement, revision and input-selection method must all match the installation. Mechanical fit alone does not establish electrical compatibility.
Which checks are useful if the POWER indicator stays off?Check incoming power, the correct revision-specific input selection, connection integrity and rack loading under the approved procedure. Do not change a supply configuration merely to clear the indication.
What should be verified before the I/O rack returns to normal service?Confirm the restored wiring and power indication, review PSOK and rack diagnostics, then test the intended field inputs and outputs under controlled conditions.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Application and maintenance planning for IC600PM502 in the correctly matched installation.

Application areas

01Standard I/O power maintenanceRestore the +5 V supply of a matched Series Six I/O rack.
02Revision-aware replacementReview input selection and connection changes against the fitted unit.
03Power-failure diagnosisCheck PSOK and the resulting rack diagnostic state.
04I/O acceptanceTest restored field-signal behavior after power and wiring checks.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Need help matching IC600PM502 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp