other
Products
Siemens 6ES7193-0CB30-0XA0 digital terminal base product views
Siemens 6ES7193-0CB30-0XA0 digital terminal base product views
Siemens 6ES7193-0CB30-0XA0 digital terminal base product views

Siemens 6ES7193-0CB30-0XA0 digital terminal base

EMAIL SALES
Siemens ET 200B
6ES7193-0CB30-0XA0 — digital terminal base

6ES7193-0CB30-0XA0 is the Siemens TB4/DC terminal base for the corresponding ET 200B electronic-block arrangement. It uses spring-clamp terminals and has a base width of 235 mm.

SiemensET 200Bdigital terminal base
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7193-0CB30-0XA0 product profile
Product familyET 200B
Exact model6ES7193-0CB30-0XA0
Terminal baseTB4/DC
Connection arrangement32 channels
Terminal technologyspring-clamp
Base width235 mm
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7193-0CB30-0XA0
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

6ES7193-0CB30-0XA0 configuration inquiry

Get a precise quote for 6ES7193-0CB30-0XA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7193-0CB30-0XA0 functions and installation

6ES7193-0CB30-0XA0 is the Siemens TB4/DC terminal base for the corresponding ET 200B electronic-block arrangement. It uses spring-clamp terminals and has a base width of 235 mm. Provides the field-wire connection positions for the selected electronic block. The base and electronic block must use the approved channel and connector arrangement.

Field terminationProvides the field-wire connection positions for the selected electronic block.
Mating arrangementThe base and electronic block must use the approved channel and connector arrangement.
Wiring retentionRecord wire positions, common connections and shielding before disturbing the installation.
Circuit acceptanceVerify the actual circuit response after assembly; electrical performance belongs to the installed electronic block.

Installation and selection boundaries

  • Base designation: TB4/DC.
  • Hardware role: Terminal and electronic-block interconnection.
  • The terminal base does not substitute for the electronic block or establish its signal ratings.
Official product data

6ES7193-0CB30-0XA0 key specifications

Base designation TB4/DC
Connection arrangement 32 channels
Field terminals spring-clamp
Base width 235 mm
Hardware role Terminal and electronic-block interconnection

Source: Siemens ET 200B distributed I/O station manual, EWA 4NEB 812 6089-02c, terminal-block specifications and dimension drawings.

Pre-order check 01

Installation environment

Prepare the actual mounting and connections for 6ES7193-0CB30-0XA0 before installation.

  • Check the mounting surface, fixing positions and access for the complete station.
  • Make the affected field circuits safe before transferring or connecting conductors.
  • Preserve wire identification, conductor preparation and the approved common and shield arrangement.
  • Confirm block seating and perform controlled point-by-point circuit tests.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Station hardware
Match the exact terminal base to the accepted ET 200B station assembly.
Electronic block
Use the specified mating electronic block and connector arrangement.
Field connections
Check all signal, supply and common terminals against the installed block wiring diagram.
Cabinet space
Reserve 235 mm base width plus wiring and service access.
Acceptance
The terminal base does not substitute for the electronic block or establish its signal ratings.
Accept the replacement only after its complete identity, installation and required operating function have been checked.
Recommended model families

More Siemens models

SiemensSiemens 6ES7144-4PF00-0AB0Siemens 6ES7144-4JF00-0AB0Siemens 6ES7144-4FF01-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1JB31-0XB0Siemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6GK1143-0TA02Siemens 6GK1143-0AA01Siemens 6ES5951-7LB21

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330906-02-12-10-02-05Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330180-X1-05 MOD 145004-75Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF830General Electric IC600BF908General Electric IC600BF914

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF915General Electric IC600BF923General Electric IC600BF940

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7193-0CB30-0XA0 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRecord 6ES7193-0CB30-0XA0 and the actual hardware revision before ordering.
2Record the installationMatch the exact terminal base to the accepted ET 200B station assembly.
3Check the mountingCheck the mounting surface, fixing positions and access for the complete station.
4Plan connectionsMake the affected field circuits safe before transferring or connecting conductors.
5Prepare the changePreserve wire identification, conductor preparation and the approved common and shield arrangement.
6Accept the installationConfirm block seating and perform controlled point-by-point circuit tests.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Bently Nevada330854-080-25-05

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330854-080-24-05

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330130-070-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330130-075-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330104-00-08-15-02-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330102-00-12-10-01-05

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 6ES7193-0CB30-0XA0 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7193-0CB30-0XA0 FAQ

Which digital terminal base is 6ES7193-0CB30-0XA0?It is the TB4/DC spring-clamp version for a 32-channel digital connection arrangement. It is terminal hardware rather than an independent controller or I/O processor.
What is the physical width of 6ES7193-0CB30-0XA0?The base drawing specifies 235 mm. Plan the complete station, field-wire bend space and service access in addition to that width.
Does 6ES7193-0CB30-0XA0 set the digital channel direction?The installed electronic block establishes the input or output function. Select the terminal base and electronic block as an approved combination rather than assigning a signal direction from the base code alone.
What is important when inserting wires into 6ES7193-0CB30-0XA0?Use the correct spring-terminal opening and the specified conductor preparation. Check conductor retention and prevent stray strands from bridging adjacent connection positions.
Can screw tightening torque be used to qualify 6ES7193-0CB30-0XA0 connections?This is a spring-clamp base, so a screw-terminal torque is not the relevant acceptance criterion for its spring connections. Confirm correct insertion and retention using the appropriate terminal procedure.
Why must common and supply wiring be reviewed on 6ES7193-0CB30-0XA0?The field circuits need the correct supply and return arrangement for the installed electronic block. A 32-position layout does not establish which terminals can share a potential.
Can 6ES7193-0CB30-0XA0 be wired from a photograph alone?A photograph does not establish every terminal assignment. Use the accepted station wiring record and the electronic block's terminal diagram, then verify the actual connector and marking positions.
What should be checked if the electronic block does not seat on 6ES7193-0CB30-0XA0?Stop and check alignment, the mating type and any physical obstruction. Do not force the parts together, because mechanical damage can prevent a reliable electrical connection.
Does fitting 6ES7193-0CB30-0XA0 confirm the station's communication protocol?No. The terminal base is not the station's network interface. Communication capability and configuration must be established from the actual station interface hardware.
How should 6ES7193-0CB30-0XA0 be returned to service after maintenance?Restore the approved wiring and shielding, confirm the electronic block is secured and perform controlled circuit tests. Record any wiring change before normal operation resumes.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens ET 200B

Applications & Why Choose Nordwel

Application and maintenance planning for 6ES7193-0CB30-0XA0 in the correctly matched installation.

Application areas

01Field terminationProvides the field-wire connection positions for the selected electronic block.
02Mating arrangementThe base and electronic block must use the approved channel and connector arrangement.
03Planned maintenanceRecord wire positions, common connections and shielding before disturbing the installation.
04Controlled replacementVerify the actual circuit response after assembly; electrical performance belongs to the installed electronic block.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Accept the replacement only after its complete identity, installation and required operating function have been checked.
Need help matching 6ES7193-0CB30-0XA0 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp