other
Products
Vibro-Meter IOC4 Mk2 rear machinery-monitoring I-O module product views
Vibro-Meter IOC4 Mk2 rear machinery-monitoring I-O module product views
Vibro-Meter IOC4 Mk2 rear machinery-monitoring I-O module product views

Vibro-Meter IOC4 Mk2 rear machinery-monitoring I-O module

EMAIL SALES
Vibro-Meter VM600 Mk2
IOC4 Mk2 — rear machinery-monitoring I-O module

IOC4 Mk2 is offered for matched VM600 Mk2 installations. It provides the rear field-interface portion of the matched machinery-monitoring module.

Vibro-MeterVM600 Mk2rear machinery-monitoring I-O module
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IOC4 Mk2 product profile
Product familyVM600 Mk2
Exact modelIOC4 Mk2
Installation positionRear of the system rack
Assembly relationshipMatched front processing module
System applicationMachinery protection and monitoring
Selection conditionStandard or safety configuration
  • Brand:

    Others
  • Item NO.:

    IOC4 Mk2
IOC4 Mk2 configuration inquiry

Get a precise quote for IOC4 Mk2

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IOC4 Mk2 functions and installation

Provides the rear field-interface portion of the matched machinery-monitoring module. Use the approved front processing module and rear interface combination. State rear module, front hardware, cables and software as separate scope items.

Application purposeProvides the rear field-interface portion of the matched machinery-monitoring module.
Connection arrangementUse the approved front processing module and rear interface combination.
Installation preparationRecord field-signal assignments and the matching front-module identity.
Operational acceptanceVerify measurements and required alarm/status functions before release.

Installation and selection boundaries

  • Preserve the accepted sensor and output connection map.
  • Distinguish standard and safety hardware and their maintenance conditions.
  • Agree any condition-monitoring licence separately from the rear hardware.
Official product data

IOC4 Mk2 key specifications

Platform VM600 Mk2
Module role Rear input/output interface
Assembly relationship Paired front and rear modules
Installation position Rear system-rack position
Configuration classes Standard and safety configurations are distinguished

Vibro-Meter VM600 product and system documentation.

Pre-order check 01

Installation environment

Prepare IOC4 Mk2 against the accepted equipment drawing and maintenance procedure.

  • Place affected protection and monitoring functions under approved maintenance controls.
  • Record field-signal assignments and the matching front-module identity.
  • Inspect rear connectors and configuration marking before fitting.
  • Verify measurements and required alarm/status functions before release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Front/rear match
Use the approved front processing module and rear interface combination.
Signal assignment
Preserve the accepted sensor and output connection map.
Configuration class
Distinguish standard and safety hardware and their maintenance conditions.
Software scope
Agree any condition-monitoring licence separately from the rear hardware.
Supplied items
State rear module, front hardware, cables and software as separate scope items.
State rear module, front hardware, cables and software as separate scope items.
Recommended model families

More Vibro-Meter models

Vibro-MeterVibro-Meter S3960 AC46286 144-201-000-222Vibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05Vibro-Meter TQ402 111-402-000-012

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter AF70982 111-412-000-012Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000Vibro-Meter CA134 144-134-000-612

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter CA202 144-202-000-215Vibro-Meter CA202 144-202-000-205Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

General Electric / Siemens / Bently NevadaGeneral Electric IC600BF914Siemens 6GK5308-2FM10-2AA3Bently Nevada 330130-075-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / General Electric / SiemensBently Nevada 330103-02-08-10-02-CNGeneral Electric IC600BF942Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / SiemensBently Nevada 330903-00-07-10-01-00Siemens 6ES7144-4FF01-0AB0Bently Nevada 330903-00-07-10-01-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0General Electric IC600BF940

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES7144-4PF00-0AB0General Electric IC600BF948Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / General Electric / SiemensBently Nevada 330103-02-04-10-02-CNGeneral Electric IC600BF915Siemens 6ES7144-1GB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / Bently NevadaGeneral Electric IC600BF923Bently Nevada 330854-080-24-05Bently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric IC600BF941Siemens 6GK1143-0TA02Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IOC4 Mk2 Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord IOC4 Mk2 with its complete hardware identification.
2Review the assemblyUse the approved front processing module and rear interface combination.
3Capture the operating configurationPreserve the accepted sensor and output connection map.
4Inspect the installationInspect rear connectors and configuration marking before fitting.
5Define the order scopeState rear module, front hardware, cables and software as separate scope items.
6Prove the restored functionVerify measurements and required alarm/status functions before release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7143-4BF50-0AA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7142-6BH00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF830

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF908

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600CB504

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600CB507

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IOC4 Mk2 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IOC4 Mk2 FAQ

Is IOC4 Mk2 the front processor or the rear field interface?It is the rear input/output portion of the machinery-monitoring module. Keep it separate from the matched front processing hardware in the order scope.
Does the rear module perform every monitoring calculation by itself?The front and rear hardware work as a matched module. Do not assign the complete pair's processing function to the rear interface alone.
What should be checked when selecting a standard or safety version?Match the required configuration, complete hardware identification and system acceptance requirements; the type name alone does not select the variant.
What field-wiring information should be retained before rear-module removal?Retain sensor assignments, signal destinations and connector identification so the accepted monitoring circuit can be restored.
Is condition-monitoring software included with every I/O module order?Software licensing and configured functions must be agreed separately. A rear-hardware order does not by itself define software entitlement.
Can hot-swap permission be assumed for every protection configuration?Follow the maintenance conditions approved for the installed configuration, especially where machinery protection or safety functions are involved.
How should the matching front module be identified?Record its complete type, revision and approved association with the rear interface before accepting a replacement.
What should a receiving check cover on IOC4 Mk2?Check the complete configuration identity, rear connector condition and mechanical fit against the accepted replacement scope.
What tests follow reconnection of the rear field interface?Verify signal assignment, expected measurements and required alarm/status behaviour under controlled commissioning conditions.
What does a rear-module-only quotation need to make clear?Identify the rear hardware separately from the front processor, field cabling and any software or configuration scope.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Vibro-Meter VM600 Mk2

Applications & Why Choose Nordwel

Application and maintenance planning for IOC4 Mk2 in the correctly matched installation.

Application areas

01Machinery field interfacesConnect the accepted monitoring circuits at the rear of the system rack.
02Protection-system maintenanceRetain configuration-specific controls during replacement.
03Signal-map restorationPreserve sensor and output destinations during rewiring.
04Monitoring acceptanceProve the restored measurements and required status behaviour.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
State rear module, front hardware, cables and software as separate scope items.
Need help matching IOC4 Mk2 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp