other
Products
General Electric IS200BICLH1B bridge control link selection reference product views
General Electric IS200BICLH1B bridge control link selection reference product views
General Electric IS200BICLH1B bridge control link selection reference product views

General Electric IS200BICLH1B bridge control link selection reference

EMAIL SALES
General Electric BICL drive interfaces
IS200BICLH1B — bridge control link selection reference

IS200BICLH1B is offered for matched BICL drive interfaces installations. It supports selection of a matched drive-to-bridge control link.

General ElectricBICL drive interfacesControl-system selection
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IS200BICLH1B product profile
Product familyBICL drive interfaces
Exact modelIS200BICLH1B
Link purposeDrive and bridge signal connection
Revision recordInstalled board identification
Cable evidenceConnector destination map
Acceptance scopeRestored control and status link
  • Brand:

    General Electric
  • Item NO.:

    IS200BICLH1B
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IS200BICLH1B configuration inquiry

Get a precise quote for IS200BICLH1B

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IS200BICLH1B functions and installation

Supports selection of a matched drive-to-bridge control link. Match the control link to the actual drive and bridge arrangement. Agree the board and any separate cable assemblies before quotation.

Application purposeSupports selection of a matched drive-to-bridge control link.
Connection arrangementMatch the control link to the actual drive and bridge arrangement.
Installation preparationRecord the installed BICL revision and cable destinations before disconnection.
Operational acceptanceProve the restored link and drive status before enabling operating duty.

Installation and selection boundaries

  • Check the entire board identification against the accepted installed version.
  • Use the approved connector-to-destination record for the installed revision.
  • Keep control/status connections distinct from the motor power circuit.
SYSTEM SELECTION

IS200BICLH1B system selection checks

Interface family BICL
System context Drive and bridge control
Selection requirement Matched installed revision

GE excitation-control instructions.

Pre-order check 01

Installation environment

Prepare IS200BICLH1B against the accepted equipment drawing and maintenance procedure.

  • Isolate the drive and follow its safe-discharge procedure.
  • Record the installed BICL revision and cable destinations before disconnection.
  • Compare connector condition and board marking with the accepted spare.
  • Prove the restored link and drive status before enabling operating duty.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Drive assembly
Match the control link to the actual drive and bridge arrangement.
Revision agreement
Check the entire board identification against the accepted installed version.
Cable mapping
Use the approved connector-to-destination record for the installed revision.
Electrical responsibilities
Keep control/status connections distinct from the motor power circuit.
Order scope
Agree the board and any separate cable assemblies before quotation.
Agree the board and any separate cable assemblies before quotation.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF915General Electric IC600BF923General Electric IC600BF940

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF941General Electric IC600BF942General Electric IC600BF948

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB504General Electric IC600CB507General Electric IC600CB513

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF830General Electric IC600BF908General Electric IC600BF914

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently Nevada / SiemensBently Nevada 330103-02-08-10-02-CNSiemens 6ES7144-1GB31-0XB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / Bently NevadaVibro-Meter TQ902-011 111-902-000-011 A1-B1-C42-D2-E10000-F2-G9800-H10Vibro-Meter S3960 AC46286 144-201-000-222Bently Nevada 330903-00-07-10-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Vibro-Meter / Bently NevadaSiemens 6ES7144-5KD00-0BA0Vibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently Nevada / Vibro-MeterSiemens 6ES7144-4PF00-0AB0Bently Nevada 330854-080-25-05Vibro-Meter TQ902-011 111-902-000-011 A1-B1-C40-D2-E5000-F0-G0-H05

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Vibro-MeterSiemens 6ES7143-5BF00-0BA0Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10Vibro-Meter AF70982 111-412-000-012

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Vibro-MeterSiemens 6ES7144-4FF01-0AB0Vibro-Meter TQ402 111-402-000-012Vibro-Meter CA134 144-134-000-612

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0Bently Nevada 330130-075-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-Meter / Siemens / Bently NevadaVibro-Meter CA202 144-202-000-205Siemens 6GK1143-0TA02Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IS200BICLH1B Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord IS200BICLH1B with its complete hardware identification.
2Review the assemblyMatch the control link to the actual drive and bridge arrangement.
3Capture the operating configurationCheck the entire board identification against the accepted installed version.
4Inspect the installationCompare connector condition and board marking with the accepted spare.
5Define the order scopeAgree the board and any separate cable assemblies before quotation.
6Prove the restored functionProve the restored link and drive status before enabling operating duty.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Vibro-MeterVM600 RPS6U SIM-275D-24 200-582-200-013

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterTQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000

A separate product reference; verify its own installation and configuration.

Specialist model
Vibro-MeterCA202 144-202-000-215

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4JF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6GK5308-2FM10-2AA3

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5AH00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IS200BICLH1B selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IS200BICLH1B FAQ

How should IS200BICLH1B be selected for an existing drive?Compare its full board identity and the installed bridge/control arrangement. The BICL family designation alone is not an interchangeability approval.
What must remain separate when reviewing bridge wiring?Separate the control/status link from the motor power circuit so that interface terminals are not mistaken for power terminals.
Can connector positions be copied from a different BICL revision?Use the wiring record approved for the installed revision. A shared family name is not enough to approve another revision's pin assignment.
What should be recorded on the removed BICL board?Capture its complete marking, revision and connector destinations before removal. Keep that record with the drive configuration and replacement scope.
Does fitting a replacement link change the drive's power capability?A control-link replacement restores the approved interface arrangement. It does not authorize a change in the drive or bridge power rating.
What receiving comparison is useful for the H1B request?Compare board marking, connector layout and physical condition against the accepted replacement identification before it enters the maintenance stock.
Which safety state is required for a BICL link inspection?Place the drive in its safe isolated maintenance state and follow the required discharge and ESD handling procedure.
Should a cable supplied with IS200BICLH1B be assumed part of the order?No. State the board and any required cable assemblies as distinct supplied items, with their actual destinations recorded.
How are uncertain drive-status indications handled after replacement?Keep the drive under commissioning controls and trace the restored status link against the accepted diagram before enabling normal operation.
What evidence closes the control-link maintenance record?Record the fitted board identity, restored cable map and successful link/status checks, then retain them with the drive's acceptance record.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric BICL drive interfaces

Applications & Why Choose Nordwel

Application and maintenance planning for IS200BICLH1B in the correctly matched installation.

Application areas

01Control-link replacementRestore the accepted drive-to-bridge connection.
02Revision-sensitive stockingRetain complete spare identification with the installed drive record.
03Cable-map verificationReconcile connector destinations before reassembly.
04Drive commissioningCheck the restored link while process operation remains controlled.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Agree the board and any separate cable assemblies before quotation.
Need help matching IS200BICLH1B to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp