other
Products
General Electric IC600PM542 24 VDC-input high-capacity I/O power supply product views
General Electric IC600PM542 24 VDC-input high-capacity I/O power supply product views
General Electric IC600PM542 24 VDC-input high-capacity I/O power supply product views

General Electric IC600PM542 24 VDC-input high-capacity I/O power supply

EMAIL SALES
General Electric Series Six
IC600PM542 — 24 VDC-input high-capacity I/O power supply

Supply a supported high-capacity Series Six I/O rack from a 24 VDC installation. Check the rail currents, total output power and rack load units as distinct capacity limits.

General ElectricSeries Six24 VDC-input high-capacity I/O power supply
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600PM542 product profile
Product familySeries Six
Exact modelIC600PM542
Rack applicationHigh-capacity I/O
Input voltage20–32 VDC
Combined output limit90 W
Rack load allowance275 load units
  • Brand:

    General Electric
  • Item NO.:

    IC600PM542
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IC600PM542 configuration inquiry

Get a precise quote for IC600PM542

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC600PM542 functions and installation

IC600PM542 is the high-capacity I/O-rack supply, not the CPU/DPU supply. GEK-90762 specifies a 20–32 VDC input, three output rails, a 90 W combined output limit and a 275-unit rack-load allowance.

High-capacity rack powerSupplies the supported I/O-rack backplane.
DC input matchingCheck the installed voltage, polarity and protective arrangement.
Capacity assessmentEvaluate rail currents, total watts and load units separately.
Rack supervisionVerify POWER and rack diagnostic behavior after restoration.

Installation and selection boundaries

  • 275 load units are not a 275 W output rating.
  • The three individual current maxima remain subject to the 90 W total limit.
  • High-capacity I/O and CPU/DPU supply applications are different rack roles.
Official product data

IC600PM542 key specifications

Input range 20–32 VDC
Output rails +5 VDC, +12 VDC and −12 VDC
Combined output power 90 W maximum
+5 V output current 16.5 A maximum
+12 V output current 1.5 A maximum
−12 V output current 1.0 A maximum
Rack loading 275 load units
Operating temperature 0 to +60 °C
Humidity 5–95%, non-condensing

GEK-90762 24 VDC Input High Capacity I/O Rack Power Supply data in the approved GEK-25367E archive.

Pre-order check 01

Installation environment

Prepare the fitted Series Six installation for a controlled exchange.

  • Secure the process and isolate the relevant DC and field circuits before removing the power unit.
  • Label positive, negative, ground and the internal backplane connections.
  • Check the high-capacity rack role, fitted revision and complete load allocation.
  • Restore power wiring, verify the POWER indication and rack diagnostics, then test required I/O functions.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Rack purpose
Use the supported high-capacity I/O-rack arrangement.
Input circuit
Match the 20–32 VDC supply and polarity with the installed protection.
Rail capacity
Check each DC output against its own current limit.
Combined loading
Apply the 90 W ceiling and the 275 load-unit allowance as separate conditions.
Fitted hardware
Compare the actual rack, power-unit revision and connection arrangement before ordering.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF923General Electric IC600BF940General Electric IC600BF941

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF942General Electric IC600BF948General Electric IC600CB504

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB507General Electric IC600CB513General Electric IC600CB516

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB525General Electric IC600CB536General Electric IC600CB537

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

ABBABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5112-R-ETHABB PM5072-T-ETHABB PM5072-R-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008ABB IIMKM02A

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB DO525ABB CM576-PNIOABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600PM542 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRetain IC600PM542 and the fitted revision when agreeing the replacement.
2Match the installed roleUse the supported high-capacity I/O-rack arrangement.
3Record connectionsLabel positive, negative, ground and the internal backplane connections.
4Review operating limits275 load units are not a 275 W output rating.
5Agree the supplied scopeCompare the actual rack, power-unit revision and connection arrangement before ordering.
6Validate restorationRestore power wiring, verify the POWER indication and rack diagnostics, then test required I/O functions.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC600BF830

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF908

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF914

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF915

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IC600PM542 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600PM542 FAQ

What type of rack uses IC600PM542?It is the 24 VDC-input high-capacity I/O-rack power supply. Its application is distinct from the CPU/DPU processor-rack supply.
Does the 275-unit allowance mean 275 watts are available?No. It is a rack load-unit allowance. The specified combined electrical output limit is 90 W, so both measures must be assessed correctly.
Which DC input range is specified for this I/O supply?The operating input range is 20–32 VDC. Verify polarity, terminal assignments and the incoming protective arrangement before reconnecting the unit.
Can the three rail current maxima be added without a power calculation?No. The rails are limited to 16.5 A at +5 V, 1.5 A at +12 V and 1.0 A at −12 V, while their combined output must stay within 90 W.
How should the rack load-unit budget be checked?Use the module load-unit values for the actual rack population and compare the result with the 275-unit allowance. Keep this calculation separate from electrical watts and individual rail currents.
What temperature and humidity conditions are stated?The specified operating temperature is 0 to +60 °C and relative humidity is 5–95%, non-condensing. Review the actual installation environment rather than treating enclosure location as sufficient evidence.
Does a high-capacity supply automatically replace a standard rack supply?A replacement still requires a rack, backplane, revision and wiring compatibility check. The capacity description alone does not establish an unconditional substitution.
Which polarity details should be preserved during removal?Record positive, negative and protective-ground terminals along with the internal backplane leads. Restore the documented circuit rather than copying an unfamiliar terminal position by appearance.
Is an illuminated POWER indicator enough to accept the I/O system?It is only part of the power check. Review rack diagnostics and verify the required field-signal mapping and response under controlled conditions.
What is useful in a quotation request for the high-capacity I/O supply?Provide the complete reference, fitted revision, rack type, input arrangement and actual module load schedule. Include the connection details needed to review the supplied replacement scope.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Application and maintenance planning for IC600PM542 in the correctly matched installation.

Application areas

01High-capacity I/O power restorationMatch the DC-fed power unit to its supported I/O rack.
02Rack population reviewsAssess the 275-unit allowance separately from electrical watts.
03Multi-rail capacity planningCheck rail limits together with combined output power.
04I/O-system restartValidate power supervision and controlled field-signal operation.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Need help matching IC600PM542 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp