other
Products
Siemens 6ES5095-8MC03 S5-95U compact unit product image
Siemens 6ES5095-8MC03 S5-95U compact unit product image
Siemens 6ES5095-8MC03 S5-95U compact unit product image

Siemens 6ES5095-8MC03 S5-95U compact unit

EMAIL SALES
Manufacturer data reviewed
6ES5095-8MC03 — S5-95U compact unit

6ES5095-8MC03 provides compact S5-95U control with an additional AS511 connection. Its second AS511 interface supports the compact-unit configuration.

SiemensS5-95U compact control unitsExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES5095-8MC03 verified profile
ManufacturerSiemens
Exact model6ES5095-8MC03
Product typeS5-95U compact unit
Product familyS5-95U compact control units
Primary roleCompact control unit
Interface contextSecond AS511 interface
  • Brand:

    SIEMENS
  • Item NO.:

    6ES5095-8MC03
  • Goods Stock:

    1
  • Part Number:

    Siemens
  • Weight:

    6ES5095-8MC03
  • Dimensions:

    S5-95U compact unit
  • Manufacture Year:

    S5-95U compact control units
  • Certification:

    Compact control unit
  • Description:

    Second AS511 interface
6ES5095-8MC03 configuration inquiry

Get a precise quote for 6ES5095-8MC03

Email Sales
Sales managerTiffany Guan

6ES5095-8MC03 official identification

Compact control unit. Second AS511 interface.

Installed roleCompact control unit
Interface contextSecond AS511 interface
Exact-code controlUse 6ES5095-8MC03 without suffix substitution.
Evidence basisOfficial Siemens exact-product record

Engineering and installation checks

  • Confirm 6ES5095-8MC03 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

6ES5095-8MC03 key specifications

Exact article number6ES5095-8MC03
Product familyS5-95U
Product typeCompact unit
Additional interfaceSecond AS511
Packaging dimensions15.9 × 15.5 × 15.2 cm
Net weight1.272 kg
LifecycleEnd of product lifecycle

Source: Official Siemens exact-product record.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm 6ES5095-8MC03 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
6ES5095-8MC03
Product family
S5-95U compact control units
Installed role
Compact control unit
Interface boundary
Second AS511 interface
Verification source
Official Siemens exact-product record
Final selection: match the complete 6ES5095-8MC03 identity before order release.
Recommended model families

More Siemens models

Siemens selection 01Siemens 6AV6542-0DA10-0AX0Siemens 6AV6642-8BA10-0AA0Siemens 6AV6542-0AC15-2AX0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 02Siemens 6AV3515-1MA22-1AA0Siemens 6AV3505-1FB12Siemens 6AV3017-1NE30-0AX0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 03Siemens 6AV2124-0MC01-0AB0Siemens 6AV2124-0QC02-0AX2Siemens 6AV2124-1DC01-0XA0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 04Siemens 6AV2124-2DC01-0AB0Siemens 6AV2125-2AE03-0AX0Siemens 6AV2125-2AE13-0AX0

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01GE IC695ACC400-CAGE IC695ACC402-AAGE IC695ALG600-CC

Confirm the complete order code and installed-system context before replacement.

Additional selection 02Siemens 6AV3688-3EH47-0AX0Siemens 6AV3617-1JC30-0AX2Siemens 6AV3617-1JC00-0AX1

Confirm the complete order code and installed-system context before replacement.

Additional selection 03Siemens 6AV3607-1JC02-0AX1Siemens 6AV3515-1MA30ABB DO525

Confirm the complete order code and installed-system context before replacement.

Additional selection 04ABB CM576-PNIOABB DI525ABB 3HAC14551-1/01C

Confirm the complete order code and installed-system context before replacement.

Additional selection 05ABB 3HAC025338-001ABB GJR2326500R1010 88VU01AABB GJR2370100R1000

Confirm the complete order code and installed-system context before replacement.

Additional selection 06ABB GJR2371100R1040 88VP02-EABB TKS-P20-541I-N001ABB PFRL101B-1.0KN

Confirm the complete order code and installed-system context before replacement.

Additional selection 07ABB ACS-BP-SABB DSQC462ABB PM5072-T-2ETH

Confirm the complete order code and installed-system context before replacement.

Additional selection 08ABB TU520-ETHABB TU532-HABB TU542

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

6ES5095-8MC03 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order code6ES5095-8MC03
2Capture the full nameplateSecond AS511 interface
3Record the installed contextSecond AS511 interface
4Verify interfaces and settingsSecond AS511 interface
5Plan commissioning checksSecond AS511 interface
6Request an exact-code quotationSecond AS511 interface

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for 6ES5095-8MC03.

Company services

Exact-model checkReview 6ES5095-8MC03, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

6ES5095-8MC03 FAQ

How should wiring be checked for second AS511 interface on 6ES5095-8MC03?

For second AS511 interface, compare the installed connection map with the exact 6ES5095-8MC03 interface. The documented additional interface is Second AS511. Visual similarity is not enough; verify pin or terminal function before moving any wire.

How should S5-95U host identity be compared with the existing S5-95U compact control units installation?

Validate S5-95U host identity as one set of conditions: complete order code, host family, connection method and configured function. All four conditions must agree before the unit is accepted.

What should installers verify about compact-unit replacement before securing 6ES5095-8MC03?

Verify compact-unit replacement against the cabinet drawing and the installed assembly before removal. Refit the hardware in the approved location and confirm that ventilation and service access remain clear.

What installation checks are needed for 1.272 kg handling on 6ES5095-8MC03?

Plan 1.272 kg handling around the approved location, mounting arrangement, isolation method, grounding and enclosure conditions. Inspect keying and connectors before the unit is secured.

What must be verified during package-condition inspection for 6ES5095-8MC03?

For package-condition inspection, compare the delivered 6ES5095-8MC03 label and package contents with the approved order. The documented packaging dimensions are 15.9 × 15.5 × 15.2 cm. Photograph any discrepancy and keep the item out of service until it is resolved.

Which terminal and interface checks apply to interface-cable labeling for 6ES5095-8MC03?

Check interface-cable labeling from end to end, including conductor identification, reference potential, shield termination and connected load. The documented additional interface is Second AS511. Correct any discrepancy before the circuit is energized.

Which traceability details support project backup preparation for 6ES5095-8MC03?

For project backup preparation, capture the as-found identity, connections, settings and active diagnostics. Update the record with the installed item and acceptance evidence after the work.

How should legacy lifecycle planning be handled during a 6ES5095-8MC03 replacement?

For legacy lifecycle planning, compare the removed and replacement units by full code, host position, terminal arrangement, configuration and supported function. The documented lifecycle context is End of product lifecycle. Treat suffix or interface differences as engineering review items.

Which acceptance test demonstrates controlled restart check after 6ES5095-8MC03 is installed?

Prove controlled restart check by exercising the assigned function under safe test conditions and comparing the response with the approved expectation. Resolve every deviation before handover.

What results confirm receipt verification during final checks on 6ES5095-8MC03?

For receipt verification, check power-up status, host recognition and the relevant input, output or communication response. Acceptance is complete only when the result is documented and alarms are clear.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for 6ES5095-8MC03.

Application areas

01Compact machine controlUse the S5-95U compact unit for self-contained control tasks in existing equipment.
02Second AS511 accessProvide an additional AS511 connection for the documented compact-unit arrangement.
03Space-limited control panelsApply the compact format where the installed S5-95U footprint must be retained.
04Legacy compact-unit serviceMaintain existing control hardware with the exact 6ES5095-8MC03 identity.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching 6ES5095-8MC03?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp