other
Products
ABB ACS355-03E-08A8-4 4 kW three-phase machinery drive product views
ABB ACS355-03E-08A8-4 4 kW three-phase machinery drive product views
ABB ACS355-03E-08A8-4 4 kW three-phase machinery drive product views

ABB ACS355-03E-08A8-4 4 kW three-phase machinery drive

EMAIL SALES
ABB ACS355
ACS355-03E-08A8-4 — 4 kW three-phase machinery drive

ACS355-03E-08A8-4 provides an ACS355 standard drive rating of 4 kW and 8.8 A output for a three-phase 380–480 V installation. Match motor duty, frame size and operating derating before selecting the drive.

ABBACS355ACS355 machinery drive
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
ACS355-03E-08A8-4 product profile
Product familyACS355
Exact modelACS355-03E-08A8-4
Input supplyThree-phase 380–480 V
Typical motor power4 kW
Nominal output current8.8 A
Frame sizeR1
  • Brand:

    ABB
  • Item NO.:

    ACS355-03E-08A8-4
ACS355-03E-08A8-4 configuration inquiry

Get a precise quote for ACS355-03E-08A8-4

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

ACS355-03E-08A8-4 functions and installation

This standard ACS355 configuration uses frame R1. Its 4 kW value is the typical motor-power rating and 8.8 A is nominal output current; supply protection, operating duty and environmental conditions require separate assessment.

Motor-speed controlProvides the 4 kW ACS355 motor-drive selection.
Load matchingCheck the motor and duty against 8.8 A nominal output current.
Mechanical integrationUse the R1 mounting and accessory arrangement.
Application setupRestore motor data, control settings and required machine interlocks.

Installation and selection boundaries

  • The standard ACS355 motor selection is 4 kW with 8.8 A nominal output current.
  • Input current and nominal motor-side output current are different selection quantities.
  • The standard IP20 / UL open unit and optional Type 1 kit are different supplied scopes.
Official product data

ACS355-03E-08A8-4 key specifications

Input supply Three-phase 380–480 V
Typical motor power 4 kW
Nominal output current 8.8 A
Frame size R1
Standard enclosure IP20 / UL open type
Optional enclosure scope UL Type 1 / NEMA 1 kit
Temperature derating Apply the manual rules above 40 °C
Altitude derating Apply the manual rules above 1000 m
Switching-frequency selection Review output-current derating for the selected setting

ABB ACS355 user manual, 3AUA0000066143 Rev E, 2020-11-02; standard ratings and installation/derating sections.

Pre-order check 01

Installation environment

Prepare the drive and motor circuit under the applicable electrical-isolation and commissioning procedure.

  • Secure the driven process, isolate the relevant supplies and verify safe electrical conditions before terminal work.
  • Record incoming supply, motor cable, protective conductor and control-terminal assignments.
  • Check the R1 installation, cooling arrangement and applicable temperature, altitude and switching-frequency derating.
  • Restore motor and application parameters, then validate direction, command response and interlocks under controlled conditions.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Motor load
Compare the motor nameplate and required duty with 4 kW typical power and 8.8 A nominal output current.
Mains supply
Match the three-phase 380–480 V input class and the engineered protective arrangement.
Frame and enclosure
Confirm frame R1, mounting space and whether the optional enclosure kit is included.
Operating conditions
Apply the manual temperature, altitude and switching-frequency rules to the actual installation.
Control application
Match motor data, command/reference sources, ramps, limits and process interlocks.
Confirm the complete drive type, actual motor duty and installed application settings before release.
Recommended model families

More ABB models

ABBABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5112-R-ETHABB PM5072-T-ETHABB PM5072-R-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008ABB IIMKM02A

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB DO525ABB CM576-PNIOABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently NevadaBently Nevada 330906-02-12-10-02-05Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330180-X1-05 MOD 145004-75Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02

Separate product references; inclusion does not establish compatibility or interchangeability.

vibro-meter / General Electricvibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013General Electric DS200SHVIG1AGeneral Electric DS200PTCTG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200PLIBG1AGeneral Electric DS200PANAH1AGeneral Electric DS200FHVAG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200FCGDH1AGeneral Electric DS200EXPSG1ABBGeneral Electric DS200EXDEG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200DMCBG2AKGGeneral Electric DS200DMCBG2AGeneral Electric DS200ACNAG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

ACS355-03E-08A8-4 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the driveMatch ACS355-03E-08A8-4 and the supplied enclosure arrangement.
2Check the motorCompare the motor nameplate and required duty with 4 kW typical power and 8.8 A nominal output current.
3Match the supplyMatch the three-phase 380–480 V input class and the engineered protective arrangement.
4Review frame and coolingConfirm frame R1, mounting space and whether the optional enclosure kit is included.
5Restore the applicationMatch motor data, command/reference sources, ramps, limits and process interlocks.
6Commission the motorRestore motor and application parameters, then validate direction, command response and interlocks under controlled conditions.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4PF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4JF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4FF01-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-1JB31-0XB0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for ACS355-03E-08A8-4 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

ACS355-03E-08A8-4 FAQ

Which motor-power and output-current pairing applies to ACS355-03E-08A8-4?The standard table pairs 4 kW motor power with 8.8 A nominal output current. Check the motor nameplate and duty against both selection values.
How should the motor winding connection be selected for this drive?Match the motor nameplate and terminal connection to the required drive output and operating voltage. The drive itself requires the specified three-phase 380–480 V incoming supply; a winding connection does not change that supply requirement.
Which nameplate entries should be reviewed during motor commissioning?Check the motor voltage, current, frequency, speed and power entries against the fitted motor. These are motor data, not values that should be copied automatically from the drive type or from a previous application.
Is scalar control interchangeable with vector speed control without review?The control modes use different motor-control assumptions. Select the mode for the actual motor and application, and review the required motor data and startup procedure rather than changing the mode merely to clear a symptom.
Must a separate motor identification run be performed for every application?Not necessarily. The manual distinguishes normal identification magnetization from a separate ID run. Follow the requirements of the selected control method; when a rotating ID run is required, the motor and driven equipment must be safe to rotate.
Can one drive control several motors using the same vector-control setup?The documented multi-motor arrangement requires scalar control. Review the combined motor loading and the separate motor protection requirements; a common drive output does not make the individual motors independently protected.
Why should motor thermal protection be reviewed after a motor exchange?The protection settings must reflect the fitted motor and its operating conditions. Restoring the old drive configuration without checking the new motor data can leave the thermal assessment inappropriate for the replacement motor.
What can an excessively short acceleration ramp cause?The required acceleration torque and current can exceed the available drive or motor capability. Review inertia, load and ramp settings together instead of assuming the nominal kW match guarantees every starting time.
Why can a rapid deceleration require a braking review?The motor can return energy to the drive during deceleration. Review the stopping time and the permitted braking arrangement; do not assume a shorter ramp is acceptable merely because the drive runs normally at steady speed.
How can a mechanical resonance band be addressed in speed operation?The drive provides critical-speed avoidance settings for identified operating bands. Establish the actual mechanical limits and verify the configured ranges with the machine secured; the settings are not a substitute for investigating a mechanical defect.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
ABB ACS355

Applications & Why Choose Nordwel

Application and maintenance planning for ACS355-03E-08A8-4 in the correctly matched installation.

Application areas

01Machinery motor controlControl a correctly selected motor within the 4 kW ACS355 rating and required duty.
02Panel replacementReview the R1 drive space, power wiring and control connections.
03Duty and environment checksAssess motor demand together with ambient, altitude and switching-frequency conditions.
04Controlled machine startupValidate direction, references and interlocks before normal operation.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the complete drive type, actual motor duty and installed application settings before release.
Need help matching ACS355-03E-08A8-4 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp