other
Products
20F11NC104JA0NNNNN 753 AC Drive
20F11NC104JA0NNNNN 753 AC Drive
20F11NC104JA0NNNNN 753 AC Drive

PLC 20F11NC104JA0NNNNN 753 AC Drive

EMAIL SALES
PLC official data reviewed
20F11NC104JA0NNNNN — 753 AC Drive

A 400 V three-phase AC drive rated 104 A, with separate normal-duty and heavy-duty motor-power ratings in a forced-air-cooled Frame 5 enclosure.

PLC 753Variable-speed motor controlExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyPLC 753
Exact model20F11NC104JA0NNNNN
Documented roleVariable-speed motor control
Interface focusAC input with DC terminals; no operator panel supplied
Input supply400 V AC, 3-phase
Output current104 A
Product ConditionConfirm in quotation
Selection basis104 A output, duty class and Frame 5 installation
  • Brand:

    PLC
  • Item NO.:

    20F11NC104JA0NNNNN
  • Goods Stock:

    1
  • Part Number:

    20F11NC104JA0NNNNN
  • Description:

    A 400 V three-phase AC drive rated 104 A, with separate normal-duty and heavy-duty motor-power ratings in a forced-air-cooled Frame 5 enclosure.
20F11NC104JA0NNNNN configuration inquiry

Get a precise quote for 20F11NC104JA0NNNNN

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

20F11NC104JA0NNNNN official identification

A 400 V three-phase AC drive rated 104 A, with separate normal-duty and heavy-duty motor-power ratings in a forced-air-cooled Frame 5 enclosure.

Ordering control20F11NC104JA0NNNNN
Engineering roleVariable-speed motor control
Primary checkConfirm motor current, 400 V supply and the selected duty rating.
Release evidenceMotor nameplate, one-line diagram, enclosure survey and braking review

Engineering and installation checks

  • The official record identifies Frame 5, forced-air cooling and IP20/IP00 open-type construction.
  • The order configuration includes input filtering, an installed common-mode jumper and a dynamic-braking transistor.
  • Manufacturer verification basis: Manufacturer official product record and 750-series technical data for 20F11NC104JA0NNNNN.
Official product data

20F11NC104JA0NNNNN key specifications

Exact model 20F11NC104JA0NNNNN
Product family PLC 753
Input supply 400 V AC, 3-phase
Output current 104 A
Normal-duty motor power 55 kW
Heavy-duty motor power 45 kW
Frame 5
Protection IP20/IP00; open type
Cooling Forced air
Input configuration AC input with DC terminals
Input filtering Filtered; common-mode jumper installed
Dynamic braking Transistor included
Operator panel Not supplied
UPC 884951166424

Source: Manufacturer official product record and 750-series technical data for 20F11NC104JA0NNNNN.

Pre-order check 01

Installation environment

Prepare 20F11NC104JA0NNNNN from documented physical, electrical and project conditions before work begins.

  • Reserve service access and airflow around the Frame 5 assembly.
  • Confirm conductor sizing and protection from the documented 104 A output requirement.
  • Inspect the 400 V three-phase feeder and grounding arrangement against the project drawing.
  • Record whether an external braking resistor is present before using the built-in transistor connection.
Keep the completed 20F11NC104JA0NNNNN installation record with the receiving and commissioning evidence.
Pre-order check 02

Compatibility confirmation

Approve 20F11NC104JA0NNNNN only when every listed selection boundary agrees with the installed system.

Motor full-load current
Must remain within the approved drive and duty selection
Duty profile
Choose 55 kW normal duty or 45 kW heavy duty from the real load cycle
Incoming supply
400 V AC, three phase
Enclosure plan
IP20/IP00 open-type unit installed inside suitable protection
Operator interface
No panel supplied; existing interface strategy requires separate confirmation
Final selection: Use the 104 A, 55 kW normal-duty and 45 kW heavy-duty values only for 20F11NC104JA0NNNNN; do not transfer them to another 20F code.
Recommended model families

More drive-control models

PLC verified models 016ES7551-1AB00-0AB06ES7553-1AA00-0AB06ED1052-1MD08-0BA2

Use this group when confirm motor current, 400 v supply and the selected duty rating.

PLC verified models 026ED1052-1FB08-0BA26ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Compare each candidate against 104 a output, duty class and frame 5 installation.

PLC verified models 036ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Keep ac input with dc terminals; no operator panel supplied as its own decision.

PLC verified models 04AI563AO568CD522

Release only with motor nameplate, one-line diagram, enclosure survey and braking review.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CI541-DPCI542-DPCI592-CS31

The variable-speed motor control requirement stays traceable to the approved project.

Tiffany verified models 02CM5640-2ETHCM582-DPCM588-CN

Do not extend data beyond this boundary: Use the 104 A, 55 kW normal-duty and 45 kW heavy-duty values only for 20F11NC104JA0NNNNN; do not transfer them to another 20F code.

Tiffany verified models 03CM589-PNIOCM598-CNDC562

Catalog checkpoint: The official record identifies Frame 5, forced-air cooling and IP20/IP00 open-type construction.

Tiffany verified models 04DO526DO572PM5032-R-ETH

Configuration checkpoint: The order configuration includes input filtering, an installed common-mode jumper and a dynamic-braking transistor.

Tiffany verified models 05PM5072-T-2ETHPM564-RP-ACATSA3S-0

Use installed evidence to close the remaining site-specific checks for 20F11NC104JA0NNNNN.

Tiffany verified models 06ATSS3D-020F11RC015JA0NNNNN6ES7357-4AH01-0AE0

Confirm quantity and destination only after the technical record is complete.

Tiffany verified models 076ES7400-2JA10-0AA16ES7414-2XG02-0AB06ES7416-2XL01-0AB0

Inspect received labels and connections before the item reaches the cabinet.

Tiffany verified models 086ES7425-2AD00-0AA06ES7515-2AN03-0AB06ES7517-3UP00-0AB0

Close commissioning with the test evidence assigned to 20F11NC104JA0NNNNN.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

20F11NC104JA0NNNNN Order Guide

Use the complete PLC designation and installed hardware record for engineering review.
1Exact identityEnter 20F11NC104JA0NNNNN without shortening or character substitution.
2Installed contextConfirm motor current, 400 V supply and the selected duty rating.
3Technical recordMotor nameplate, one-line diagram, enclosure survey and braking review
4Connection planAC input with DC terminals; no operator panel supplied
5Acceptance boundaryUse the 104 A, 55 kW normal-duty and 45 kW heavy-duty values only for 20F11NC104JA0NNNNN; do not transfer them to another 20F code.
6Official sourceManufacturer official product record and 750-series technical data for 20F11NC104JA0NNNNN

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Model-specific support for evidence review, compatibility decisions and controlled quotation of 20F11NC104JA0NNNNN.

Support scope

Identity reviewCompare the submitted label with 20F11NC104JA0NNNNN.
Technical boundaryConfirm motor current, 400 V supply and the selected duty rating.
Site evidenceMotor nameplate, one-line diagram, enclosure survey and braking review
Quotation handoffProvide quantity, destination and required date in the same request.

20F11NC104JA0NNNNN FAQ

What decides between the two published power ratings?

Use the machine load profile and required overload capability. The official record lists 55 kW for normal duty and 45 kW for heavy duty; the engineering owner must select the duty class from measured operating demand.

How should the 104 A value influence the feeder review?

Treat 104 A as the drive output-current rating, then size upstream protection, line conductors and motor cabling under the applicable project rules rather than copying that value directly into every component choice.

What enclosure work is required for the open-type construction?

Install the unit inside protection suitable for the site, preserving required access, contamination control and forced-air paths. The page does not assign an enclosure rating to the completed cabinet.

Does the included braking transistor prove a resistor is installed?

No. Record the resistor identity, resistance, thermal protection and wiring separately; the internal transistor is only one element of a complete braking arrangement.

Why must the common-mode jumper position be recorded?

The official configuration states that the jumper is installed. Any site decision to change it belongs to the approved grounding and interference-control design, not to a routine swap.

What should be checked when no operator panel is supplied?

Confirm how local setup, status viewing and manual control will be performed, and list any separately installed panel or remote interface in the inquiry.

Which photographs are useful for a Frame 5 replacement review?

Provide the complete nameplate, cabinet elevation, top and bottom cable entries, ventilation path, mounting points and braking connections with enough context to judge access.

How is motor suitability evaluated before parameter entry?

Compare rated voltage, full-load current, frequency, speed, insulation constraints and load torque with the approved application record before creating the commissioning parameter set.

What evidence should be captured during the first loaded run?

Record output current, speed reference, motor direction, thermal behavior, interlocks and any braking event under a controlled test condition defined by the site procedure.

When can 20F11NC104JA0NNNNN be released for purchase?

Release it only after the complete code, 400 V supply, selected duty rating, 104 A requirement, Frame 5 fit and external-option list have independent evidence.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
PLC 753 application review

20F11NC104JA0NNNNN Applications

Use cases are framed around the documented role of 20F11NC104JA0NNNNN; final suitability remains project-controlled.

Application contexts

01 · High-current conveyor sectionsApply the 104 A rating only after starting torque and overload demand are documented.
02 · Large centrifugal pumpsReview hydraulic operating points before setting acceleration and minimum speed.
03 · Industrial process fansVerify enclosure heat removal for sustained airflow-control duty.
04 · Coordinated machine drivesMap start, stop, reference and interlock ownership before network commissioning.

Why choose Nordwel

Identity disciplineThe inquiry keeps 20F11NC104JA0NNNNN intact through quotation and receiving.
Evidence separationCatalog facts stay separate from site measurements and approvals.
Focused handoffOpen checks are assigned before cabinet work or energization.
Dedicated coordinationTiffany Guan consolidates the technical and delivery records.
Selection boundary: retain 20F11NC104JA0NNNNN exactly and close every stated engineering check before release.
Need a documented review for 20F11NC104JA0NNNNN?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp