other
Products
20F11RC015JA0NNNNN 753 AC Drive
20F11RC015JA0NNNNN 753 AC Drive
20F11RC015JA0NNNNN 753 AC Drive

PLC 20F11RC015JA0NNNNN 753 AC Drive

EMAIL SALES
PLC official data reviewed
20F11RC015JA0NNNNN — 753 AC Drive

A compact Frame 1 variable-speed drive for 400 V three-phase service, rated 15.4 A with distinct 7.5 kW normal-duty and 5.5 kW heavy-duty selections.

PLC 753Compact machine-speed regulationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyPLC 753
Exact model20F11RC015JA0NNNNN
Documented roleCompact machine-speed regulation
Interface focusFiltered AC input with DC terminals and embedded input/output
Rated supply400 V AC, 3-phase
Nominal output current15.4 A
Product ConditionConfirm in quotation
Selection basis15.4 A output and Frame 1 cabinet fit
  • Brand:

    PLC
  • Item NO.:

    20F11RC015JA0NNNNN
  • Goods Stock:

    1
  • Part Number:

    20F11RC015JA0NNNNN
  • Description:

    A compact Frame 1 variable-speed drive for 400 V three-phase service, rated 15.4 A with distinct 7.5 kW normal-duty and 5.5 kW heavy-duty selections.
20F11RC015JA0NNNNN configuration inquiry

Get a precise quote for 20F11RC015JA0NNNNN

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

20F11RC015JA0NNNNN official identification

A compact Frame 1 variable-speed drive for 400 V three-phase service, rated 15.4 A with distinct 7.5 kW normal-duty and 5.5 kW heavy-duty selections.

Ordering control20F11RC015JA0NNNNN
Engineering roleCompact machine-speed regulation
Primary checkReconcile branch supply, motor load and compact-cabinet thermal conditions.
Release evidenceMotor schedule, panel layout, control terminal list and startup procedure

Engineering and installation checks

  • The official configuration is rated 7.5 kW normal duty and 5.5 kW heavy duty at 400 V three phase.
  • It uses forced-air cooling, open-type IP20 construction and is supplied without an operator panel.
  • Manufacturer verification basis: Manufacturer official product record and 750-series technical data for 20F11RC015JA0NNNNN.
Official product data

20F11RC015JA0NNNNN key specifications

Exact model 20F11RC015JA0NNNNN
Series PLC 753
Rated supply 400 V AC, 3-phase
Nominal output current 15.4 A
Normal-duty capacity 7.5 kW
Heavy-duty capacity 5.5 kW
Mechanical frame 1
Ingress configuration IP20, open type
Ventilation Forced air
Power entry AC input plus DC terminals
Filter arrangement Integrated filter; common-mode jumper fitted
Braking hardware Dynamic-braking transistor
Local display Blank position; no panel
UPC code 884951300262

Source: Manufacturer official product record and 750-series technical data for 20F11RC015JA0NNNNN.

Pre-order check 01

Installation environment

Prepare 20F11RC015JA0NNNNN from documented physical, electrical and project conditions before work begins.

  • Measure the compact mounting zone and preserve unobstructed cooling air.
  • Verify the branch circuit is the documented 400 V three-phase source.
  • Label embedded control wiring before removing the old terminals.
  • Identify any remotely mounted display or keypad as a separate item.
Keep the completed 20F11RC015JA0NNNNN installation record with the receiving and commissioning evidence.
Pre-order check 02

Compatibility confirmation

Approve 20F11RC015JA0NNNNN only when every listed selection boundary agrees with the installed system.

Motor loading
15.4 A rating checked against the actual operating current
Overload category
7.5 kW normal duty or 5.5 kW heavy duty selected from load behavior
Panel environment
IP20 open unit protected by the finished enclosure
Control transfer
Embedded input/output assignments copied from the approved drawing
Local operation
No supplied panel; commissioning access planned separately
Final selection: The 15.4 A and Frame 1 data are specific to 20F11RC015JA0NNNNN; a similar front appearance does not establish interchangeability.
Recommended model families

More drive-control models

PLC verified models 016ED1052-1FB08-0BA26ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Use this group when reconcile branch supply, motor load and compact-cabinet thermal conditions.

PLC verified models 026ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Compare each candidate against 15.4 a output and frame 1 cabinet fit.

PLC verified models 03AI563AO568CD522

Keep filtered ac input with dc terminals and embedded input/output as its own decision.

PLC verified models 04CI541-DPCI542-DPCI592-CS31

Release only with motor schedule, panel layout, control terminal list and startup procedure.

Additional published brands

Additional Advantage Models

Tiffany verified models 01CM588-CNCM589-PNIOCM598-CN

The compact machine-speed regulation requirement stays traceable to the approved project.

Tiffany verified models 02DC562DO526DO572

Do not extend data beyond this boundary: The 15.4 A and Frame 1 data are specific to 20F11RC015JA0NNNNN; a similar front appearance does not establish interchangeability.

Tiffany verified models 03PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Catalog checkpoint: The official configuration is rated 7.5 kW normal duty and 5.5 kW heavy duty at 400 V three phase.

Tiffany verified models 04ATSA3S-0ATSS3D-020F11NC104JA0NNNNN

Configuration checkpoint: It uses forced-air cooling, open-type IP20 construction and is supplied without an operator panel.

Tiffany verified models 056ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Use installed evidence to close the remaining site-specific checks for 20F11RC015JA0NNNNN.

Tiffany verified models 066ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Confirm quantity and destination only after the technical record is complete.

Tiffany verified models 076ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Inspect received labels and connections before the item reaches the cabinet.

Tiffany verified models 086ES7553-1AA00-0AB06ED1052-1MD08-0BA2CM5640-2ETH

Close commissioning with the test evidence assigned to 20F11RC015JA0NNNNN.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

20F11RC015JA0NNNNN Order Guide

Use the complete PLC designation and installed hardware record for engineering review.
1Exact identityEnter 20F11RC015JA0NNNNN without shortening or character substitution.
2Installed contextReconcile branch supply, motor load and compact-cabinet thermal conditions.
3Technical recordMotor schedule, panel layout, control terminal list and startup procedure
4Connection planFiltered AC input with DC terminals and embedded input/output
5Acceptance boundaryThe 15.4 A and Frame 1 data are specific to 20F11RC015JA0NNNNN; a similar front appearance does not establish interchangeability.
6Official sourceManufacturer official product record and 750-series technical data for 20F11RC015JA0NNNNN

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Model-specific support for evidence review, compatibility decisions and controlled quotation of 20F11RC015JA0NNNNN.

Support scope

Identity reviewCompare the submitted label with 20F11RC015JA0NNNNN.
Technical boundaryReconcile branch supply, motor load and compact-cabinet thermal conditions.
Site evidenceMotor schedule, panel layout, control terminal list and startup procedure
Quotation handoffProvide quantity, destination and required date in the same request.

20F11RC015JA0NNNNN FAQ

Is the 7.5 kW figure valid for every load cycle?

No. It is the published normal-duty rating. Applications with heavier overload demand must be evaluated against the separate 5.5 kW heavy-duty rating and the real machine cycle.

What makes Frame 1 fit more than a width check?

Confirm mounting points, height, depth, cable bend space, fan path and access to power and control terminals; a cabinet opening alone does not establish serviceability.

How should a 15.4 A motor comparison be documented?

Attach the motor nameplate and operating-current history, then record why starting, acceleration and continuous load remain inside the approved selection.

Can the old local display be assumed to transfer?

No. This order code has a blank operator-panel position. Identify the existing display and its mounting or cable arrangement before treating it as reusable.

What is the correct check for embedded input/output wiring?

Build a terminal-by-terminal transfer sheet showing signal type, source, destination, normal state and interlock purpose, then verify it with power isolated.

Why is cabinet temperature important on this compact drive?

Forced-air cooling still depends on suitable inlet air and heat removal. Measure temperature at the installed location under representative panel loading.

How is the DC-terminal provision handled in a replacement?

Record whether the existing system uses the terminals, document polarity and protective arrangements, and leave them unassigned when the approved design does not use them.

What should the receiving inspection verify besides the model label?

Check Frame 1 construction, open-type protection, blank display position, terminal condition, fan area and shipment damage against the purchase record.

Which startup test is suitable for a feeder application?

With material safely removed, verify direction, speed reference, permissives and stop behavior before a controlled loaded test confirms torque and current.

What information allows Tiffany Guan to quote this compact configuration accurately?

Send the exact code, quantity, destination, motor data, duty choice, panel constraints, required accessories and requested delivery window in one request.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
PLC 753 application review

20F11RC015JA0NNNNN Applications

Use cases are framed around the documented role of 20F11RC015JA0NNNNN; final suitability remains project-controlled.

Application contexts

01 · Packaging-machine axesConfirm cycle frequency and deceleration demand before commissioning.
02 · Compact mixer drivesSeparate continuous mixing torque from short overload events when choosing duty.
03 · Skid-mounted pump controlCheck enclosure ventilation where several heat sources share a small panel.
04 · Small material feedersValidate low-speed torque and direction logic with material removed.

Why choose Nordwel

Identity disciplineThe inquiry keeps 20F11RC015JA0NNNNN intact through quotation and receiving.
Evidence separationCatalog facts stay separate from site measurements and approvals.
Focused handoffOpen checks are assigned before cabinet work or energization.
Dedicated coordinationTiffany Guan consolidates the technical and delivery records.
Selection boundary: retain 20F11RC015JA0NNNNN exactly and close every stated engineering check before release.
Need a documented review for 20F11RC015JA0NNNNN?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp