other
Products
Siemens 6SY8102-0LA02 legacy drive-system component product image
Siemens 6SY8102-0LA02 legacy drive-system component product image
Siemens 6SY8102-0LA02 legacy drive-system component product image

Siemens 6SY8102-0LA02 legacy drive-system component

EMAIL SALES
Manufacturer data reviewed
6SY8102-0LA02 — legacy drive-system component

6SY8102-0LA02 retains the corresponding article position in the installed drive assembly. Verify the nameplate, cooling route, connectors and mounting.

SiemensSiemens legacy drive hardwareExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6SY8102-0LA02 verified profile
ManufacturerSiemens
Exact model6SY8102-0LA02
Product typelegacy drive-system component
Product familySiemens legacy drive hardware
Primary roleInstalled drive article position
Interface contextNameplate and cooling check
  • Brand:

    SIEMENS
  • Item NO.:

    6SY8102-0LA02
  • Goods Stock:

    1
  • Part Number:

    Siemens
  • Weight:

    6SY8102-0LA02
  • Dimensions:

    legacy drive-system component
  • Manufacture Year:

    Siemens legacy drive hardware
  • Certification:

    Installed drive article position
  • Description:

    Nameplate and cooling check
6SY8102-0LA02 configuration inquiry

Get a precise quote for 6SY8102-0LA02

Email Sales
Sales managerTiffany Guan

6SY8102-0LA02 official identification

Installed drive article position. Nameplate and cooling check.

Installed roleInstalled drive article position
Interface contextNameplate and cooling check
Exact-code controlUse 6SY8102-0LA02 without suffix substitution.
Evidence basisOfficial Siemens drive-system documentation

Engineering and installation checks

  • Confirm 6SY8102-0LA02 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

6SY8102-0LA02 key specifications

Exact article number6SY8102-0LA02
ManufacturerSiemens
Hardware contextLegacy drive-system hardware
Installation evidenceComplete installed position record
Connection evidenceAs-found connector and cable map
Cooling evidenceInstalled airflow and clearance record
Selection basisExact nameplate and project hardware entry

Source: Official Siemens drive-system documentation.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm 6SY8102-0LA02 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
6SY8102-0LA02
Product family
Siemens legacy drive hardware
Installed role
Installed drive article position
Interface boundary
Nameplate and cooling check
Verification source
Official Siemens drive-system documentation
Final selection: match the complete 6SY8102-0LA02 identity before order release.
Recommended model families

More Siemens models

Siemens selection 01Siemens 6AV2124-1DC01-0XA0Siemens 6AV2124-2DC01-0AB0Siemens 6AV2125-2AE03-0AX0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 02Siemens 6AV2125-2AE13-0AX0Siemens 6AV6542-0DA10-0AX0Siemens 6AV3607-1JC02-0AX1

Confirm the complete order code and installed-system context before replacement.

Siemens selection 03Siemens 6AV3515-1MA30Siemens 6AV3515-1MA22-1AA0Siemens 6AV3505-1FB12

Confirm the complete order code and installed-system context before replacement.

Siemens selection 04Siemens 6AV3017-1NE30-0AX0Siemens 6AV2124-0MC01-0AB0Siemens 6AV2124-0QC02-0AX2

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01ABB 3HAC14551-1/01CABB 3HAC025338-001ABB GJR2326500R1010 88VU01A

Confirm the complete order code and installed-system context before replacement.

Additional selection 02ABB GJR2370100R1000ABB GJR2371100R1040 88VP02-EABB TKS-P20-541I-N001

Confirm the complete order code and installed-system context before replacement.

Additional selection 03ABB PFRL101B-1.0KNABB ACS-BP-SABB DSQC462

Confirm the complete order code and installed-system context before replacement.

Additional selection 04ABB PM5072-T-2ETHABB TU520-ETHABB TU532-H

Confirm the complete order code and installed-system context before replacement.

Additional selection 05ABB TU542GE IC695RMX228-ACABGE IC695SPF002B

Confirm the complete order code and installed-system context before replacement.

Additional selection 06Siemens 6AV6642-8BA10-0AA0Siemens 6AV6542-0AC15-2AX0Siemens 6AV6381-2BN07-0AV0

Confirm the complete order code and installed-system context before replacement.

Additional selection 07Siemens 6AV3688-3EH47-0AX0Siemens 6AV3617-1JC30-0AX2Siemens 6AV3617-1JC00-0AX1

Confirm the complete order code and installed-system context before replacement.

Additional selection 08ABB DO525ABB CM576-PNIOABB DI525

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

6SY8102-0LA02 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order code6SY8102-0LA02
2Capture the full nameplateNameplate and cooling check
3Record the installed contextNameplate and cooling check
4Verify interfaces and settingsNameplate and cooling check
5Plan commissioning checksNameplate and cooling check
6Request an exact-code quotationNameplate and cooling check

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for 6SY8102-0LA02.

Company services

Exact-model checkReview 6SY8102-0LA02, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

6SY8102-0LA02 FAQ

What evidence is required for receiving identity on 6SY8102-0LA02?

Check receiving identity on arrival, including the nameplate, connector condition, protective caps and shipment quantity. Do not treat a similar family code as an exact match.

What installation checks are needed for drive-assembly mounting evidence on 6SY8102-0LA02?

Plan drive-assembly mounting evidence around the approved location, mounting arrangement, isolation method, grounding and enclosure conditions. The documented installation evidence is Complete installed position record. Inspect keying and connectors before the unit is secured.

How should wiring be checked for cable and connector condition on 6SY8102-0LA02?

For cable and connector condition, compare the installed connection map with the exact 6SY8102-0LA02 interface. The documented connection evidence is As-found connector and cable map. Visual similarity is not enough; verify pin or terminal function before moving any wire.

How should engineers document cooling-route preservation before work begins on 6SY8102-0LA02?

Preserve cooling-route preservation through labelled photographs, controlled drawings and a configuration backup where applicable. The documented cooling evidence is Installed airflow and clearance record. The record should let another engineer reconstruct the original installation.

Which protection boundaries matter when evaluating enclosure contamination check for 6SY8102-0LA02?

Confirm enclosure contamination check before connection by checking the circuit rating, enclosure environment and safety requirement together. Record the governing limit in the commissioning checklist.

What should the commissioning plan include for neighboring hardware clearance on 6SY8102-0LA02?

Prepare for neighboring hardware clearance with the approved configuration loaded, connections checked and dependent equipment in a safe state. The documented hardware context is Legacy drive-system hardware. Verify diagnostics first, then test only the intended function.

What should the maintenance record capture about controlled project comparison on 6SY8102-0LA02?

Document controlled project comparison before work begins, including the complete 6SY8102-0LA02 code, slot or carrier, wiring and parameter baseline. Attach the post-work results to the same maintenance record.

Which replacement checks address pre-shutdown staging for 6SY8102-0LA02?

Review pre-shutdown staging against the existing assembly, lifecycle plan and rollback procedure. A newer or visually similar item is not automatically interchangeable.

How is restart diagnostic review proven at handover for 6SY8102-0LA02?

Demonstrate restart diagnostic review during a staged functional test that protects connected equipment and the process. Record the observed result, diagnostics and maintenance approval before release.

How should handover traceability be verified before 6SY8102-0LA02 returns to service?

Verify handover traceability with a controlled startup and a test of only the intended channel, signal, communication path or safety action. Confirm normal diagnostics and record the result before return to service.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for 6SY8102-0LA02.

Application areas

01Legacy drive positionsFit 6SY8102-0LA02 in the exact drive-assembly position recorded for the installation.
02Cable arrangement recoveryRestore the documented connectors and cable routing after controlled hardware removal.
03Airflow-path maintenanceUse the component where the verified cooling route and enclosure clearances are preserved.
04Project hardware continuityMaintain the installed drive configuration against the exact nameplate and project entry.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching 6SY8102-0LA02?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp