A 1300 nm, multimode 100BASE-FX SFP for supported RX3i network ports, specified for links up to 2 km in full-duplex operation.
Brand:
General ElectricGoods Stock:
1Part Number:
IC695SPF002BDescription:
A 1300 nm, multimode 100BASE-FX SFP for supported RX3i network ports, specified for links up to 2 km in full-duplex operation.Adds a 100BASE-FX multimode optical link to a supported SFP position.
Supports long full-duplex runs within the published optical limits.
Requires correct core size, connector pair and peer wavelength.
Keeps the B suffix visible through quotation and inspection.
| Base catalogue number | IC695SPF002 |
|---|---|
| Interface standard | 100BASE-FX |
| Nominal wavelength | 1300 nm |
| Fiber type | Multimode fiber |
| Supported core sizes | 50 µm or 62.5 µm |
| Full-duplex distance | 2 m to 2000 m |
| Half-duplex distance | 2 m to 400 m |
| Form factor | Small form-factor pluggable transceiver |
| Exact suffix handling | B retained without decoding |
| Document basis | Emerson IC695SPF002 quick-start and RX3i ordering information |
Values are limited to published Emerson/GE product, installation or release documentation. The complete suffix is retained for exact-model control.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Use this six-step review to keep quotation, compatibility and receiving decisions tied to the complete requested code.
Use IC695SPF002B exactly as shown on the label or requisition.
Provides a 100BASE-FX optical interface for supported RX3i Ethernet equipment using multimode fiber.
Identify the PACSystems RX3i optical network accessories hardware and surrounding configuration.
Compare power, backplane, network, optical or firmware requirements as applicable.
Include environment, approvals, shutdown window and receiving inspection needs.
Send the evidence to Tiffany Guan for an exact-code quotation.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Industrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetModel-specific answers for compatibility, installation, replacement and commissioning questions.
Match the complete IC695SPF002B code.
Record the installed PACSystems RX3i optical network accessories context.
Back up settings, firmware or network details where applicable.
Plan measurable checks before return to service.
The official IC695SPF002 documentation specifies a 100BASE-FX optical interface.
No. The official quick-start identifies multimode fiber with 50 µm or 62.5 µm core sizes.
The nominal optical wavelength is 1300 nm.
The published full-duplex range is 2 m to 2000 m when the complete optical link meets the specified conditions.
No. The published half-duplex range is 2 m to 400 m.
Use it only in a host position that officially supports IC695SPF002 and confirm the peer transceiver, fiber and port configuration.
Verify full seating, connector cleanliness, transmit/receive orientation, peer wavelength, fiber type and port configuration.
It is part of the customer-supplied exact code. The official performance documents use the IC695SPF002 base number, so the suffix is not interpreted beyond identity control.
Not by assumption. Interface rate, host support, wavelength, fiber budget and peer compatibility must all match the engineered link.
Provide the complete model, host equipment, peer transceiver, fiber core size, link length, duplex mode, quantity and destination.
Directory links stay within Nordwel; use the contact block above for an exact-model review.
The checkpoint list supports enquiry preparation; the installed design and official instructions remain controlling.
A 1300 nm, multimode 100BASE-FX SFP for supported RX3i network ports, specified for links up to 2 km in full-duplex operation.
Provides a 100BASE-FX optical interface for supported RX3i Ethernet equipment using multimode fiber.
Base catalogue number IC695SPF002; complete B suffix retained as the requested receiving identity without unsupported decoding.
A 1300 nm, multimode 100BASE-FX SFP for supported RX3i network ports, specified for links up to 2 km in full-duplex operation.
Use the complete order code for controlled maintenance and receiving.
Reduces ambiguity by retaining the complete suffix.
Keeps installation checks aligned with official parameters.
Supports faster quotation review with clear site evidence.
Creates a practical commissioning record for maintenance teams.
Use this reference to prepare the enquiry and installation package for IC695SPF002B.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
