other
Products
Woodward 5466-1035 MicroNet CPU5200 module product image
Woodward 5466-1035 MicroNet CPU5200 module product image
Woodward 5466-1035 MicroNet CPU5200 module product image

Woodward 5466-1035 MicroNet CPU5200 module

EMAIL SALES
Manufacturer data reviewed
5466-1035 — MicroNet CPU5200 module

5466-1035 provides the MicroNet CPU5200 processing role with a PowerPC MPC5200 at 400 MHz. The module includes 64 MB flash, 128 MB RAM and dual CAN.

WoodwardMicroNet Plus control hardwareExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
5466-1035 verified profile
ManufacturerWoodward
Exact model5466-1035
Product typeMicroNet CPU5200 module
Product familyMicroNet Plus control hardware
Primary roleMicroNet CPU5200 processing
Interface context400 MHz, 64 MB flash, 128 MB RAM
  • Brand:

    Others
  • Item NO.:

    5466-1035
  • Goods Stock:

    1
  • Part Number:

    Woodward
  • Weight:

    5466-1035
  • Dimensions:

    MicroNet CPU5200 module
  • Manufacture Year:

    MicroNet Plus control hardware
  • Certification:

    Provides the MicroNet CPU5200 processing role
  • Description:

    PowerPC MPC5200 at 400 MHz with dual CAN
5466-1035 configuration inquiry

Get a precise quote for 5466-1035

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

5466-1035 official identification

Provides the MicroNet CPU5200 processing role. PowerPC MPC5200 at 400 MHz with dual CAN.

Installed roleProvides the MicroNet CPU5200 processing role
Interface contextPowerPC MPC5200 at 400 MHz with dual CAN
Exact-code controlUse 5466-1035 without suffix substitution.
Evidence basisOfficial Woodward product documentation

Engineering and installation checks

  • Confirm 5466-1035 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

5466-1035 key specifications

Exact article number 5466-1035
Module designation MicroNet CPU5200
Processor PowerPC MPC5200
Processor speed 400 MHz
Flash memory 64 MB
RAM 128 MB
CAN interfaces Dual CAN
System context MicroNet Plus

Source: Official Woodward product documentation.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm 5466-1035 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
5466-1035
Product family
MicroNet Plus control hardware
Installed role
Provides the MicroNet CPU5200 processing role
Interface boundary
PowerPC MPC5200 at 400 MHz with dual CAN
Verification source
Official Woodward product documentation
Final selection: match the complete 5466-1035 identity before order release.
Recommended model families

More Woodward models

Woodward selection 01Woodward 5466-318Woodward 8237-1246Woodward 8200-203

Confirm the complete order code and installed-system context before replacement.

Woodward selection 02Woodward 5437-2131Woodward EASYGEN-3500XT-P1 8440-2082Woodward 8280-4001

Confirm the complete order code and installed-system context before replacement.

Woodward selection 03Woodward 5466-353Woodward 5464-654Woodward 5464-333

Confirm the complete order code and installed-system context before replacement.

Woodward selection 04Woodward 5464-337Woodward 5464-334Woodward 5466-411

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01Siemens 6ES7141-1BF30-0XB0Siemens 6AV3017-1NE30-0AX0Siemens 6AV2124-0MC01-0AB0

Confirm the complete order code and installed-system context before replacement.

Additional selection 02Siemens 6AV2124-0QC02-0AX2Siemens 6AV2124-1DC01-0XA0Siemens 6AV2124-2DC01-0AB0

Confirm the complete order code and installed-system context before replacement.

Additional selection 03Siemens 6AV2125-2AE03-0AX0Siemens 6AV2125-2AE13-0AX0GE IC695ACC400-CA

Confirm the complete order code and installed-system context before replacement.

Additional selection 04GE IC695ACC402-AAGE IC695ALG600-CCGE IC695ALG608-CA

Confirm the complete order code and installed-system context before replacement.

Additional selection 05GE IC695ALG616-LFGE IC695ALG626-CAGE IC695ALG704-CB

Confirm the complete order code and installed-system context before replacement.

Additional selection 06GE IC695CHS012-DRGE IC695CHS016-EAGE IC695CMM002

Confirm the complete order code and installed-system context before replacement.

Additional selection 07GE IC695CMM004-BFGE IC695CMU310-DMGE IC695CPE302

Confirm the complete order code and installed-system context before replacement.

Additional selection 08GE IC695CPE305-AFBAGE IC695SPF002BGE IC695RMX228-ACAB

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

5466-1035 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order code5466-1035
2Capture the full nameplatePowerPC MPC5200 at 400 MHz with dual CAN
3Record the installed contextPowerPC MPC5200 at 400 MHz with dual CAN
4Verify interfaces and settingsPowerPC MPC5200 at 400 MHz with dual CAN
5Plan commissioning checksPowerPC MPC5200 at 400 MHz with dual CAN
6Request an exact-code quotationPowerPC MPC5200 at 400 MHz with dual CAN

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for 5466-1035.

Company services

Exact-model checkReview 5466-1035, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

5466-1035 FAQ

How should CPU5200 nameplate identity be checked when 5466-1035 arrives?

For CPU5200 nameplate identity, compare the delivered 5466-1035 label and package contents with the approved order. Photograph any discrepancy and keep the item out of service until it is resolved.

Which application details establish PowerPC processor role for 5466-1035?

Establish PowerPC processor role from the required process function and the existing MicroNet Plus control hardware architecture. The documented processor is PowerPC MPC5200. Keep the complete model code in the selection record so a similar product is not substituted.

What should installers verify about 400 MHz processing before securing 5466-1035?

Verify 400 MHz processing against the cabinet drawing and the installed assembly before removal. The documented processor speed is 400 MHz. Refit the hardware in the approved location and confirm that ventilation and service access remain clear.

What should the connection review cover for 64 MB flash on 5466-1035?

Review 64 MB flash against terminal numbers, polarity, signal type, shielding and cable routing on the controlled drawings. The documented flash memory is 64 MB. Label every conductor before disconnection and verify each point after reconnection.

How should 128 MB RAM be assessed against the application limits for 5466-1035?

Evaluate 128 MB RAM using the exact-model ratings and the worst operating condition in the cabinet or field location. Allow for supply, load, temperature and required protection margins.

Which terminal and interface checks apply to dual CAN interface for 5466-1035?

Check dual CAN interface from end to end, including conductor identification, reference potential, shield termination and connected load. Correct any discrepancy before the circuit is energized.

What evidence should accompany 5466-1035 when reviewing MicroNet Plus hardware context?

Check MicroNet Plus hardware context on arrival, including the nameplate, connector condition, protective caps and shipment quantity. Do not treat a similar family code as an exact match.

Which records are needed to preserve installed connection record for 5466-1035?

Record installed connection record with the installed location, connection map, configuration, diagnostics and relevant test results. Use the same record during installation and final review.

What should the maintenance record capture about controlled startup review on 5466-1035?

Document controlled startup review before work begins, including the complete 5466-1035 code, slot or carrier, wiring and parameter baseline. Attach the post-work results to the same maintenance record.

What results confirm configuration acceptance during final checks on 5466-1035?

For configuration acceptance, check power-up status, host recognition and the relevant input, output or communication response. Acceptance is complete only when the result is documented and alarms are clear.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Woodward exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for 5466-1035.

Application areas

01MicroNet Plus processingUse 5466-1035 for the documented CPU5200 processing role in MicroNet Plus hardware.
02400 MHz control executionRun the installed control workload on the 400 MHz PowerPC MPC5200 processor.
03Program and data memorySupport applications using 64 MB flash and 128 MB RAM.
04Dual CAN communicationConnect two documented CAN communication paths from the CPU module.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching 5466-1035?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp