other
Products
IC695ALG626-CA HART Analog Input Module
IC695ALG626-CA HART Analog Input Module
IC695ALG626-CA HART Analog Input Module

GE IC695ALG626-CA HART Analog Input Module

EMAIL SALES
GE official data reviewed
IC695ALG626-CA — HART Analog Input Module

Acquires analog inputs and supports HART communication across sixteen single-ended or eight differential channels. Official manufacturer material is used as the technical boundary for this exact-model review.

GEPACSystems RX3i I/OExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC695ALG626-CA verified profile
ManufacturerGE
Exact modelIC695ALG626-CA
Product typeHART Analog Input Module
Product familyPACSystems RX3i I/O
Primary roleAcquires analog inputs and supports HART communication across sixteen single-ended or eight differential channels.
Interface contextConfigured as 16 single-ended or 8 differential inputs with HART support.
  • Brand:

    General Electric
  • Goods Stock:

    1
  • Part Number:

    IC695ALG626-CA
  • Description:

    HART Analog Input Module | PACSystems RX3i I/O
IC695ALG626-CA configuration inquiry

Get a precise quote for IC695ALG626-CA

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC695ALG626-CA official identification

Acquires analog inputs and supports HART communication across sixteen single-ended or eight differential channels. Exact-order review is based on Emerson IC695ALG626 product page and PACSystems RX3i I/O data sheet.

Complete modelIC695ALG626-CA
Documented familyPACSystems RX3i I/O
Verified functionAcquires analog inputs and supports HART communication across sixteen single-ended or eight differential channels.
Interface or ordering factConfigured as 16 single-ended or 8 differential inputs with HART support.

Engineering and installation checks

  • Retain the complete IC695ALG626-CA designation in the quotation, receiving and maintenance records.
  • Verify IC695ALG626-CA against the approved HART channel schedule.
  • Manufacturer verification basis: Emerson IC695ALG626 product page and PACSystems RX3i I/O data sheet.
Official product data

IC695ALG626-CA key specifications

Exact designation IC695ALG626-CA
Module role HART analog input
Single-ended channels 16
Differential channels 8
Communication feature HART support

Source: Emerson IC695ALG626 product page and PACSystems RX3i I/O data sheet.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Verify IC695ALG626-CA against the approved HART channel schedule.
  • Confirm single-ended or differential wiring before termination.
  • Check loop power, shielding and channel mode for every connected device.
  • Commission both the analog value and required HART communication path.
Record the as-found condition and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation, approved system configuration and installed connection details.

Complete identity
IC695ALG626-CA
Input arrangement
16 single-ended or 8 differential
Communication
HART
Field-device check
Confirm loop and HART requirements
Commissioning check
Validate value and communication status
Final selection: use IC695ALG626-CA only after the exact nameplate, installed hardware, project configuration and manufacturer-documented limits have been confirmed.
Recommended model families

More General Electric models

General Electric verified models 01GE IC200GBI001-LLGE IC200GBI001-JLGE IC200GBI001-GJ

Each target page displays Tiffany Guan and sales2@mooreplc.com.

General Electric verified models 02GE IC200GBI001-FGGE IC200MDL650MGE IC200MDL650L

Each target page displays Tiffany Guan and sales2@mooreplc.com.

General Electric verified models 03GE IC200MDL643GE IC200MDL240LGE IC200MDL240

Each target page displays Tiffany Guan and sales2@mooreplc.com.

General Electric verified models 04GE IC200MDD842FGE IC200ERM002HGE IC200ERM002C

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01Siemens 6GK5204-2BC10-2AA3

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Siemens 6GK5124-0BA00-2AA3Siemens 6GK5213-3BB00-2AB2Siemens 6GK5204-0BA00-2BA3

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6ES7511-1FK02-0AB0Siemens 6ES7315-2FH13-0AB0Siemens 6ES7315-2AF02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES7352-1AH02-0AE0Siemens 6AU1455-2AD00-0AA0Siemens 6GK5788-1FC00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Siemens 6GK5201-3JR00-2BA6Siemens 6GK5108-0PA00-2AA3ABB DSTA002B / 3BSE018317R1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB 3BHE037864R0104 UFC911 B104ABB RB4C-355/170 3AXD50000006934ABB 086364-001

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB ACS880-04-330A-7ABB NTR012-AABB NDBU-95 64008366D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB RAI02JABB PFEA113 3BSE028144R0020ABB 3BHE037649R0101 PDD500A101

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC695ALG626-CA Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Exact identityIC695ALG626-CA must be retained without shortening or normalizing its suffix.
2Product familyGE / PACSystems RX3i I/O
3Primary functionAcquires analog inputs and supports HART communication across sixteen single-ended or eight differential channels.
4Mechanical checkCompare the installed mounting and panel or base arrangement.
5Connection checkConfigured as 16 single-ended or 8 differential inputs with HART support.
6Official sourceEmerson IC695ALG626 product page and PACSystems RX3i I/O data sheet.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Model verificationCompare the complete IC695ALG626-CA code and installed nameplate.
Compatibility reviewCheck mounting, connection, system configuration and application context.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation boundaryUse only manufacturer-published facts; undocumented values are not inferred.

IC695ALG626-CA FAQ

How should engineers verify IC695ALG626-CA before approving an exact replacement?

Match the complete designation IC695ALG626-CA, the installed nameplate, hardware position, connected circuits and approved project record. A family-level match alone is not sufficient.

What manufacturer-documented role does IC695ALG626-CA perform?

The reviewed role is: Acquires analog inputs and supports HART communication across sixteen single-ended or eight differential channels. This function must be checked against the actual installed application before release.

Which compatibility record is essential for IC695ALG626-CA?

Use the approved system configuration together with the full nameplate. The relevant documented check is 16 single-ended or 8 differential.

What should be recorded before removing IC695ALG626-CA?

Capture the module position, complete label, connector and cable identities, configuration values and as-found diagnostic state before any disconnection.

How should the connections for IC695ALG626-CA be checked?

Confirm the documented interface context: Configured as 16 single-ended or 8 differential inputs with HART support. Compare every terminal, connector, cable and shield arrangement with the project drawings.

What configuration review is required for IC695ALG626-CA?

Compare the stored project, hardware revision, channel or port assignments and firmware-dependent requirements with the approved baseline before commissioning.

Which commissioning evidence should be retained for IC695ALG626-CA?

Retain the nameplate record, wiring inspection, configuration comparison, startup diagnostics and controlled functional-test results for the exact installed application.

Can a nearby suffix replace IC695ALG626-CA without further review?

No. A nearby suffix may represent a different hardware, firmware, approval or manufacturing revision. Keep IC695ALG626-CA as the controlled identity and review any proposed alternative separately.

What environmental check applies to IC695ALG626-CA?

Apply only the manufacturer-published limits for IC695ALG626-CA or its documented base catalog, then confirm cabinet temperature, contamination, vibration, moisture and site approvals.

What should a sourcing request for IC695ALG626-CA include?

Provide IC695ALG626-CA, quantity, destination, clear nameplate images, the installed-system context, required schedule and any controlled compatibility evidence. Tiffany Guan can coordinate the review.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
GE application review

IC695ALG626-CA Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · Process input loop replacementUse IC695ALG626-CA only where the manufacturer-documented function and approved project conditions match.
02 · Channel configuration reviewUse IC695ALG626-CA only where the manufacturer-documented function and approved project conditions match.
03 · Instrument signal migrationUse IC695ALG626-CA only where the manufacturer-documented function and approved project conditions match.
04 · Input-diagnostic investigationUse IC695ALG626-CA only where the manufacturer-documented function and approved project conditions match.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify IC695ALG626-CA. Check first: Verify IC695ALG626-CA against the approved HART channel schedule.
Need help matching this GE configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp