other
Products
IC695ALG704-CB Analog Output Module
IC695ALG704-CB Analog Output Module
IC695ALG704-CB Analog Output Module

GE IC695ALG704-CB Analog Output Module

EMAIL SALES
GE official data reviewed
IC695ALG704-CB — Analog Output Module

Provides four configurable current or voltage analog output channels. Official manufacturer material is used as the technical boundary for this exact-model review.

GEPACSystems RX3i I/OExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC695ALG704-CB verified profile
ManufacturerGE
Exact modelIC695ALG704-CB
Product typeAnalog Output Module
Product familyPACSystems RX3i I/O
Primary roleProvides four configurable current or voltage analog output channels.
Interface contextFour output channels for current or voltage service.
  • Brand:

    General Electric
  • Goods Stock:

    1
  • Part Number:

    IC695ALG704-CB
  • Description:

    Analog Output Module | PACSystems RX3i I/O
IC695ALG704-CB configuration inquiry

Get a precise quote for IC695ALG704-CB

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC695ALG704-CB official identification

Provides four configurable current or voltage analog output channels. Exact-order review is based on Emerson IC695ALG704 product page and PACSystems RX3i I/O data sheet.

Complete modelIC695ALG704-CB
Documented familyPACSystems RX3i I/O
Verified functionProvides four configurable current or voltage analog output channels.
Interface or ordering factFour output channels for current or voltage service.

Engineering and installation checks

  • Retain the complete IC695ALG704-CB designation in the quotation, receiving and maintenance records.
  • Retain IC695ALG704-CB as the complete receiving identity.
  • Manufacturer verification basis: Emerson IC695ALG704 product page and PACSystems RX3i I/O data sheet.
Official product data

IC695ALG704-CB key specifications

Exact designation IC695ALG704-CB
Module role Analog output
Output channels 4
Output classes Current and voltage
Configuration basis Per approved channel schedule

Source: Emerson IC695ALG704 product page and PACSystems RX3i I/O data sheet.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Retain IC695ALG704-CB as the complete receiving identity.
  • Verify each channel is assigned for current or voltage output.
  • Confirm load, loop polarity and shield termination before energizing.
  • Stroke or simulate every used output and record the commanded versus measured value.
Record the as-found condition and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation, approved system configuration and installed connection details.

Complete identity
IC695ALG704-CB
Channel count
4
Output classes
Current and voltage
Load check
Confirm each connected field circuit
Functional check
Verify commanded and measured outputs
Final selection: use IC695ALG704-CB only after the exact nameplate, installed hardware, project configuration and manufacturer-documented limits have been confirmed.
Recommended model families

More General Electric models

General Electric verified models 01GE IC200GBI001-LLGE IC200GBI001-JLGE IC200GBI001-GJ

Each target page displays Tiffany Guan and sales2@mooreplc.com.

General Electric verified models 02GE IC200GBI001-FGGE IC200MDL650MGE IC200MDL650L

Each target page displays Tiffany Guan and sales2@mooreplc.com.

General Electric verified models 03GE IC200MDL643GE IC200MDL240LGE IC200MDL240

Each target page displays Tiffany Guan and sales2@mooreplc.com.

General Electric verified models 04GE IC200MDD842FGE IC200ERM002HGE IC200ERM002C

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Siemens 6GK5204-0BA00-2BA3Siemens 6ES7511-1FK02-0AB0Siemens 6ES7315-2FH13-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Siemens 6ES7315-2AF02-0AB0Siemens 6ES7352-1AH02-0AE0Siemens 6AU1455-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6GK5788-1FC00-0AA0Siemens 6GK5201-3JR00-2BA6Siemens 6GK5108-0PA00-2AA3

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB DSTA002B / 3BSE018317R1ABB 3BHE037864R0104 UFC911 B104ABB RB4C-355/170 3AXD50000006934

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB 086364-001ABB ACS880-04-330A-7ABB NTR012-A

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Siemens 6GK5204-2BC10-2AA3Siemens 6GK5124-0BA00-2AA3Siemens 6GK5213-3BB00-2AB2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC695ALG704-CB Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Exact identityIC695ALG704-CB must be retained without shortening or normalizing its suffix.
2Product familyGE / PACSystems RX3i I/O
3Primary functionProvides four configurable current or voltage analog output channels.
4Mechanical checkCompare the installed mounting and panel or base arrangement.
5Connection checkFour output channels for current or voltage service.
6Official sourceEmerson IC695ALG704 product page and PACSystems RX3i I/O data sheet.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Model verificationCompare the complete IC695ALG704-CB code and installed nameplate.
Compatibility reviewCheck mounting, connection, system configuration and application context.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation boundaryUse only manufacturer-published facts; undocumented values are not inferred.

IC695ALG704-CB FAQ

How should engineers verify IC695ALG704-CB before approving an exact replacement?

Match the complete designation IC695ALG704-CB, the installed nameplate, hardware position, connected circuits and approved project record. A family-level match alone is not sufficient.

What manufacturer-documented role does IC695ALG704-CB perform?

The reviewed role is: Provides four configurable current or voltage analog output channels. This function must be checked against the actual installed application before release.

Which compatibility record is essential for IC695ALG704-CB?

Use the approved system configuration together with the full nameplate. The relevant documented check is 4.

What should be recorded before removing IC695ALG704-CB?

Capture the module position, complete label, connector and cable identities, configuration values and as-found diagnostic state before any disconnection.

How should the connections for IC695ALG704-CB be checked?

Confirm the documented interface context: Four output channels for current or voltage service. Compare every terminal, connector, cable and shield arrangement with the project drawings.

What configuration review is required for IC695ALG704-CB?

Compare the stored project, hardware revision, channel or port assignments and firmware-dependent requirements with the approved baseline before commissioning.

Which commissioning evidence should be retained for IC695ALG704-CB?

Retain the nameplate record, wiring inspection, configuration comparison, startup diagnostics and controlled functional-test results for the exact installed application.

Can a nearby suffix replace IC695ALG704-CB without further review?

No. A nearby suffix may represent a different hardware, firmware, approval or manufacturing revision. Keep IC695ALG704-CB as the controlled identity and review any proposed alternative separately.

What environmental check applies to IC695ALG704-CB?

Apply only the manufacturer-published limits for IC695ALG704-CB or its documented base catalog, then confirm cabinet temperature, contamination, vibration, moisture and site approvals.

What should a sourcing request for IC695ALG704-CB include?

Provide IC695ALG704-CB, quantity, destination, clear nameplate images, the installed-system context, required schedule and any controlled compatibility evidence. Tiffany Guan can coordinate the review.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
GE application review

IC695ALG704-CB Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · Final-control loop replacementUse IC695ALG704-CB only where the manufacturer-documented function and approved project conditions match.
02 · Output channel reassignmentUse IC695ALG704-CB only where the manufacturer-documented function and approved project conditions match.
03 · Current or voltage loop reviewUse IC695ALG704-CB only where the manufacturer-documented function and approved project conditions match.
04 · Actuator command-path testingUse IC695ALG704-CB only where the manufacturer-documented function and approved project conditions match.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify IC695ALG704-CB. Check first: Retain IC695ALG704-CB as the complete receiving identity.
Need help matching this GE configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp