other
Products
Pepperl+Fuchs NJ15-30GK50-E2-30M inductive proximity sensor product image
Pepperl+Fuchs NJ15-30GK50-E2-30M inductive proximity sensor product image
Pepperl+Fuchs NJ15-30GK50-E2-30M inductive proximity sensor product image

Pepperl+Fuchs NJ15-30GK50-E2-30M inductive proximity sensor

EMAIL SALES
Manufacturer data reviewed
NJ15-30GK50-E2-30M — inductive proximity sensor

NJ15-30GK50-E2-30M detects metal targets at a 15 mm non-flush operating distance. Its PNP normally-open output operates from 10 to 60 VDC through the 30 m cable.

Pepperl+FuchsM30 inductive sensorsExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
NJ15-30GK50-E2-30M verified profile
ManufacturerPepperl+Fuchs
Exact modelNJ15-30GK50-E2-30M
Product typeinductive proximity sensor
Product familyM30 inductive sensors
Primary role15 mm metal detection
Interface contextPNP NO, 10–60 VDC, 30 m cable
  • Brand:

    Others
  • Item NO.:

    NJ15-30GK50-E2-30M
  • Goods Stock:

    1
  • Part Number:

    Pepperl+Fuchs
  • Weight:

    NJ15-30GK50-E2-30M
  • Dimensions:

    inductive proximity sensor
  • Manufacture Year:

    M30 inductive sensors
  • Certification:

    Detects metal targets at a 15 mm non-flush operating distance
  • Description:

    PNP normally-open output, 10–60 VDC supply and 30 m cable
NJ15-30GK50-E2-30M configuration inquiry

Get a precise quote for NJ15-30GK50-E2-30M

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

NJ15-30GK50-E2-30M official identification

Detects metal targets at a 15 mm non-flush operating distance. PNP normally-open output, 10–60 VDC supply and 30 m cable.

Installed roleDetects metal targets at a 15 mm non-flush operating distance
Interface contextPNP normally-open output, 10–60 VDC supply and 30 m cable
Exact-code controlUse NJ15-30GK50-E2-30M without suffix substitution.
Evidence basisOfficial Pepperl+Fuchs data sheet

Engineering and installation checks

  • Confirm NJ15-30GK50-E2-30M from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

NJ15-30GK50-E2-30M key specifications

Exact article number NJ15-30GK50-E2-30M
Sensing distance 15 mm non-flush
Output type PNP normally open
Operating voltage 10–60 VDC
Switching frequency 0–500 Hz
Load current 200 mA maximum
Cable PVC, 30 m, 0.75 mm²
Ingress protection IP68
Ambient temperature −25 to 70 °C

Source: Official Pepperl+Fuchs data sheet.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm NJ15-30GK50-E2-30M from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
NJ15-30GK50-E2-30M
Product family
M30 inductive sensors
Installed role
Detects metal targets at a 15 mm non-flush operating distance
Interface boundary
PNP normally-open output, 10–60 VDC supply and 30 m cable
Verification source
Official Pepperl+Fuchs data sheet
Final selection: match the complete NJ15-30GK50-E2-30M identity before order release.
Recommended model families

More Pepperl+Fuchs models

Pepperl+Fuchs selection 01Pepperl+Fuchs KFD2-UT-EX1Pepperl+Fuchs K-ADP-USBPepperl+Fuchs KFD2-STC5-1

Confirm the complete order code and installed-system context before replacement.

Pepperl+Fuchs selection 02Pepperl+Fuchs LB9006CPepperl+Fuchs K-LB-1.30GPepperl+Fuchs KFD2-STC4-Ex1.H

Confirm the complete order code and installed-system context before replacement.

Pepperl+Fuchs selection 03Pepperl+Fuchs TPH-LBF-IA1.36.DE.1Pepperl+Fuchs MBHC-FB-4RPepperl+Fuchs HD2-DM-B

Confirm the complete order code and installed-system context before replacement.

Pepperl+Fuchs selection 04Pepperl+Fuchs HCD2-FBPS-1.500Pepperl+Fuchs RSD-GW3-Ex2.DPEPepperl+Fuchs KFD2-SL2-Ex1.B

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01Siemens 6ES7141-1BF40-0AB0GE IC695ALG616-LFGE IC695ALG626-CA

Confirm the complete order code and installed-system context before replacement.

Additional selection 02GE IC695ALG704-CBGE IC695CHS012-DRGE IC695CHS016-EA

Confirm the complete order code and installed-system context before replacement.

Additional selection 03GE IC695CMM002GE IC695CMM004-BFGE IC695CMU310-DM

Confirm the complete order code and installed-system context before replacement.

Additional selection 04GE IC695CPE302GE IC695CPE305-AFBAGE IC695SPF002B

Confirm the complete order code and installed-system context before replacement.

Additional selection 05GE IC695RMX228-ACABGE IC695PSD040MGE IC695PSD040

Confirm the complete order code and installed-system context before replacement.

Additional selection 06GE IC695PNS001-BCBDSiemens 6AV6642-8BA10-0AA0Siemens 6AV6542-0AC15-2AX0

Confirm the complete order code and installed-system context before replacement.

Additional selection 07Siemens 6AV6381-2BN07-0AV0Siemens 6AV3688-3EH47-0AX0Siemens 6AV3617-1JC30-0AX2

Confirm the complete order code and installed-system context before replacement.

Additional selection 08Siemens 6AV3617-1JC00-0AX1Siemens 6AV3607-1JC02-0AX1Siemens 6AV3515-1MA30

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

NJ15-30GK50-E2-30M Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order codeNJ15-30GK50-E2-30M
2Capture the full nameplatePNP normally-open output, 10–60 VDC supply and 30 m cable
3Record the installed contextPNP normally-open output, 10–60 VDC supply and 30 m cable
4Verify interfaces and settingsPNP normally-open output, 10–60 VDC supply and 30 m cable
5Plan commissioning checksPNP normally-open output, 10–60 VDC supply and 30 m cable
6Request an exact-code quotationPNP normally-open output, 10–60 VDC supply and 30 m cable

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for NJ15-30GK50-E2-30M.

Company services

Exact-model checkReview NJ15-30GK50-E2-30M, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

NJ15-30GK50-E2-30M FAQ

What ratings must be reviewed for 15 mm sensing distance before NJ15-30GK50-E2-30M is energized?

For 15 mm sensing distance, compare the installed conditions with the applicable voltage, current, timing and environmental limits. The documented sensing distance is 15 mm non-flush. A value outside any stated boundary requires engineering resolution.

What should installers verify about non-flush mounting before securing NJ15-30GK50-E2-30M?

Verify non-flush mounting against the cabinet drawing and the installed assembly before removal. Refit the hardware in the approved location and confirm that ventilation and service access remain clear.

What installation checks are needed for PNP normally-open output on NJ15-30GK50-E2-30M?

Plan PNP normally-open output around the approved location, mounting arrangement, isolation method, grounding and enclosure conditions. The documented output type is PNP normally open. Inspect keying and connectors before the unit is secured.

How should wiring be checked for 10–60 VDC supply on NJ15-30GK50-E2-30M?

For 10–60 VDC supply, compare the installed connection map with the exact NJ15-30GK50-E2-30M interface. The documented operating voltage is 10–60 VDC. Visual similarity is not enough; verify pin or terminal function before moving any wire.

What ratings must be reviewed for 0–500 Hz switching before NJ15-30GK50-E2-30M is energized?

For 0–500 Hz switching, compare the installed conditions with the applicable voltage, current, timing and environmental limits. The documented switching frequency is 0–500 Hz. A value outside any stated boundary requires engineering resolution.

Which protection boundaries matter when evaluating 200 mA load current for NJ15-30GK50-E2-30M?

Confirm 200 mA load current before connection by checking the circuit rating, enclosure environment and safety requirement together. The documented load current is 200 mA maximum. Record the governing limit in the commissioning checklist.

What should the connection review cover for 30 m cable route on NJ15-30GK50-E2-30M?

Review 30 m cable route against terminal numbers, polarity, signal type, shielding and cable routing on the controlled drawings. The documented cable is PVC, 30 m, 0.75 mm². Label every conductor before disconnection and verify each point after reconnection.

What must be compared before replacing NJ15-30GK50-E2-30M where IP68 environment is involved?

Address IP68 environment before shutdown by preserving the configuration and recording every connection to NJ15-30GK50-E2-30M. Install the replacement only after identity and compatibility checks pass.

How should engineers document target alignment check before work begins on NJ15-30GK50-E2-30M?

Preserve target alignment check through labelled photographs, controlled drawings and a configuration backup where applicable. The record should let another engineer reconstruct the original installation.

How is sensor switching test proven at handover for NJ15-30GK50-E2-30M?

Demonstrate sensor switching test during a staged functional test that protects connected equipment and the process. The documented sensing distance is 15 mm non-flush. Record the observed result, diagnostics and maintenance approval before release.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Pepperl+Fuchs exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for NJ15-30GK50-E2-30M.

Application areas

01Metal target detectionDetect metallic machine targets with the NJ15-30GK50-E2-30M inductive sensor.
0215 mm non-flush sensingUse the documented 15 mm operating distance in a non-flush mounting arrangement.
03Fast position monitoringMonitor moving targets at switching frequencies up to 500 Hz.
04Protected field installationApply the IP68 sensor across −25 to 70 °C using its integral 30 m PVC cable.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching NJ15-30GK50-E2-30M?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp