other
Products
NOTIFIER LCM-320 loop control module product image
NOTIFIER LCM-320 loop control module product image
NOTIFIER LCM-320 loop control module product image

NOTIFIER LCM-320 loop control module

EMAIL SALES
Manufacturer data reviewed
LCM-320 — loop control module

LCM-320 adds signaling-line circuits to compatible ONYX fire-alarm control panels. It uses a 24 VDC nominal supply, supports 400 mA loop current and installs as a plug-in module.

NOTIFIERONYX fire-alarm control accessoriesExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
LCM-320 verified profile
ManufacturerNOTIFIER
Exact modelLCM-320
Product typeloop control module
Product familyONYX fire-alarm control accessories
Primary roleSignaling-line loop expansion
Interface context24 VDC plug-in module
  • Brand:

    Honeywell
  • Item NO.:

    LCM-320
  • Goods Stock:

    1
  • Part Number:

    NOTIFIER
  • Weight:

    LCM-320
  • Dimensions:

    loop control module
  • Manufacture Year:

    ONYX fire-alarm control accessories
  • Certification:

    Adds signaling-line circuits to compatible ONYX control panels
  • Description:

    24 VDC nominal supply with plug-in installation
LCM-320 configuration inquiry

Get a precise quote for LCM-320

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

LCM-320 official identification

Adds signaling-line circuits to compatible ONYX control panels. 24 VDC nominal supply with plug-in installation.

Installed roleAdds signaling-line circuits to compatible ONYX control panels
Interface context24 VDC nominal supply with plug-in installation
Exact-code controlUse LCM-320 without suffix substitution.
Evidence basisOfficial Honeywell data sheet

Engineering and installation checks

  • Confirm LCM-320 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

LCM-320 key specifications

Exact article number LCM-320
Product type Loop control module
Host context Compatible ONYX control panels
Nominal supply 24 VDC
Maximum supply 27.6 VDC
Maximum module current 130 mA
SLC loop current 400 mA maximum
Operating temperature 0 to 49 °C
Installation Plug-in module

Source: Official Honeywell data sheet.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm LCM-320 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
LCM-320
Product family
ONYX fire-alarm control accessories
Installed role
Adds signaling-line circuits to compatible ONYX control panels
Interface boundary
24 VDC nominal supply with plug-in installation
Verification source
Official Honeywell data sheet
Final selection: match the complete LCM-320 identity before order release.
Recommended model families

More Honeywell and NOTIFIER models

Honeywell and NOTIFIER selection 01Honeywell MLI-DN10EHoneywell MLF-TC04SHoneywell MLF-RD04A

Confirm the complete order code and installed-system context before replacement.

Honeywell and NOTIFIER selection 02Honeywell MLF-PD02AHoneywell MLF-HD02AHoneywell MLF-DV04C

Confirm the complete order code and installed-system context before replacement.

Honeywell and NOTIFIER selection 03Honeywell MLF-DV04AHoneywell MLF-DC04CHoneywell MLF-AH04A

Confirm the complete order code and installed-system context before replacement.

Honeywell and NOTIFIER selection 04Honeywell DC-TFB813Honeywell DC-TFB403Honeywell MLI-DN14E

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01Siemens 6AV6542-0DA10-0AX0GE IC695RMX228-ACABGE IC695PSD040M

Confirm the complete order code and installed-system context before replacement.

Additional selection 02GE IC695PSD040GE IC695PNS001-BCBDSiemens 6AV6642-8BA10-0AA0

Confirm the complete order code and installed-system context before replacement.

Additional selection 03Siemens 6AV6542-0AC15-2AX0Siemens 6AV6381-2BN07-0AV0Siemens 6AV3688-3EH47-0AX0

Confirm the complete order code and installed-system context before replacement.

Additional selection 04Siemens 6AV3617-1JC30-0AX2Siemens 6AV3617-1JC00-0AX1Siemens 6AV3607-1JC02-0AX1

Confirm the complete order code and installed-system context before replacement.

Additional selection 05Siemens 6AV3515-1MA30Siemens 6AV3515-1MA22-1AA0Siemens 6AV3505-1FB12

Confirm the complete order code and installed-system context before replacement.

Additional selection 06Siemens 6AV3017-1NE30-0AX0Siemens 6AV2124-0MC01-0AB0Siemens 6AV2124-0QC02-0AX2

Confirm the complete order code and installed-system context before replacement.

Additional selection 07Siemens 6AV2124-1DC01-0XA0Siemens 6AV2124-2DC01-0AB0Siemens 6AV2125-2AE03-0AX0

Confirm the complete order code and installed-system context before replacement.

Additional selection 08Siemens 6AV2125-2AE13-0AX0GE IC695ACC400-CAGE IC695ACC402-AA

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

LCM-320 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order codeLCM-320
2Capture the full nameplate24 VDC nominal supply with plug-in installation
3Record the installed context24 VDC nominal supply with plug-in installation
4Verify interfaces and settings24 VDC nominal supply with plug-in installation
5Plan commissioning checks24 VDC nominal supply with plug-in installation
6Request an exact-code quotation24 VDC nominal supply with plug-in installation

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for LCM-320.

Company services

Exact-model checkReview LCM-320, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

LCM-320 FAQ

Why does loop control identity matter when specifying LCM-320?

Use the full LCM-320 marking and the intended operating role to assess loop control identity. Selection should be based on documented function, not appearance or a shared family name.

Which compatibility checks apply to compatible ONYX panel check on LCM-320?

For compatible ONYX panel check, compare the exact model, host assembly, terminal hardware, interface and controlled configuration. The documented host context is Compatible ONYX control panels. Mechanical fit alone does not establish compatibility.

How should 24 VDC supply be handled during installation of LCM-320?

For 24 VDC supply, record the as-found position, isolate the affected equipment and verify the mounting hardware. The documented nominal supply is 24 VDC. Complete clearance, grounding and environmental checks before restoring power.

Which terminal and interface checks apply to 27.6 VDC maximum for LCM-320?

Check 27.6 VDC maximum from end to end, including conductor identification, reference potential, shield termination and connected load. The documented maximum supply is 27.6 VDC. Correct any discrepancy before the circuit is energized.

Which protection boundaries matter when evaluating 130 mA module current for LCM-320?

Confirm 130 mA module current before connection by checking the circuit rating, enclosure environment and safety requirement together. The documented maximum module current is 130 mA. Record the governing limit in the commissioning checklist.

Which operating limits govern 400 mA loop current on LCM-320?

Check 400 mA loop current against the documented electrical, thermal, environmental and load boundaries for the application. The documented s lcloop current is 400 mA maximum. Do not energize the circuit while any rating or protection condition is unresolved.

How should plug-in seating be handled during installation of LCM-320?

For plug-in seating, record the as-found position, isolate the affected equipment and verify the mounting hardware. Complete clearance, grounding and environmental checks before restoring power.

Which terminal and interface checks apply to control-panel isolation for LCM-320?

Check control-panel isolation from end to end, including conductor identification, reference potential, shield termination and connected load. Correct any discrepancy before the circuit is energized.

Which traceability details support signaling-line record for LCM-320?

For signaling-line record, capture the as-found identity, connections, settings and active diagnostics. Update the record with the installed item and acceptance evidence after the work.

How should functional acceptance be verified before LCM-320 returns to service?

Verify functional acceptance with a controlled startup and a test of only the intended channel, signal, communication path or safety action. Confirm normal diagnostics and record the result before return to service.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
NOTIFIER exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for LCM-320.

Application areas

01Signaling-line expansionUse LCM-320 to add signaling-line circuits to a compatible ONYX control panel.
02Plug-in panel installationExpand the fire-alarm control assembly through the documented plug-in module position.
0324 VDC control hardwareOperate the loop-control function from the documented 24 VDC nominal supply.
04SLC loop capacitySupport a signaling-line circuit with loop current up to the documented 400 mA maximum.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching LCM-320?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp