other
Products
Siemens 6ES7157-0AG83-0XA0 AFDiS six-branch intrinsically safe distributor product views
Siemens 6ES7157-0AG83-0XA0 AFDiS six-branch intrinsically safe distributor product views
Siemens 6ES7157-0AG83-0XA0 AFDiS six-branch intrinsically safe distributor product views

Siemens 6ES7157-0AG83-0XA0 AFDiS six-branch intrinsically safe distributor

EMAIL SALES
Siemens Active field distribution
6ES7157-0AG83-0XA0 — AFDiS six-branch intrinsically safe distributor

Distribute a supported fieldbus segment through six protected intrinsically safe branches. Review the branch-specific current allowances and the approved hazardous-area circuit before installation.

SiemensActive field distributionAFDiS six-branch intrinsically safe distributor
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7157-0AG83-0XA0 product profile
Product familyActive field distribution
Exact model6ES7157-0AG83-0XA0
Fieldbus supportPROFIBUS PA and FOUNDATION Fieldbus H1
Protected branches6 intrinsically safe FISCO branches
Bus supply16–32 VDC
Version 01 branch 1 limit60 mA
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7157-0AG83-0XA0
6ES7157-0AG83-0XA0 configuration inquiry

Get a precise quote for 6ES7157-0AG83-0XA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7157-0AG83-0XA0 functions and installation

AFDiS supports PROFIBUS PA and FOUNDATION Fieldbus H1 with galvanic isolation and a repeater function. In the documented version 01 configuration, branch 1 permits up to 60 mA and branches 2–6 up to 40 mA each; overall system limits remain separate design constraints.

Safe branch distributionConnects six field branches within the approved circuit design.
Signal separationProvides isolated main-line-to-branch coupling with repeating.
Load distributionApply the different branch-current allowances of the fitted version.
Field protectionMaintain the enclosure and hazardous-area installation conditions.

Installation and selection boundaries

  • Check branch-specific and complete-device loading rules independently.
  • Verify the fitted version and applicable certificate before specifying an Ex installation.
  • Isolation and repeating do not remove fieldbus topology or cable-design requirements.
Official product data

6ES7157-0AG83-0XA0 key specifications

Fieldbus support PROFIBUS PA and FOUNDATION Fieldbus H1
Protected branches 6 intrinsically safe FISCO branches
Bus supply 16–32 VDC
Version 01 branch 1 limit 60 mA
Version 01 branches 2–6 limit 40 mA per branch
Electrical separation Galvanic isolation between main line and branches
Signal handling Repeater function
Enclosure protection IP66
Operating ambient −40 to +70 °C

Siemens DP/PA Coupler, Active Field Distributors and Links manual, 2011; AFDiS version 01 technical data.

Pre-order check 01

Installation environment

Prepare the installed Active field distribution assembly for a controlled component exchange.

  • Apply the site hazardous-area and process-isolation procedure before opening the field installation.
  • Record main-line wiring, branch numbers, shielding and field-device assignments.
  • Verify version-specific load allocation, approved intrinsic-safety design and enclosure sealing.
  • Complete segment communication, branch and process-signal tests before release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Approval context
Match the installed AFDiS version and certificate to the complete field circuit.
Branch loading
Apply the correct current allowance to each numbered branch.
Bus system
Confirm the PA or H1 design and required connected field devices.
Electrical role
Account for the isolated repeater path in the overall segment design.
Environment
Check ambient conditions, mounting and cable entries for the completed enclosure.
Release the installation only after its configured function and required acceptance checks agree.
Recommended model families

More Siemens models

SiemensSiemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6GK1143-0TA02Siemens 6GK1143-0AA01Siemens 6ES5951-7LB21

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5948-3UA23Siemens 6ES5948-3UA13Siemens 6ES5945-7UA23

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5941-7UA12Siemens 6ES5921-3WB12Siemens 6ES5541-8AA11

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

vibro-meter / ABBvibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013ABB V18345-1010261001ABB 3HAC061275-001

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5132-T-ETHABB PM5112-R-ETHABB PM5072-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5072-R-ETHABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IIMKM02AABB DO525ABB CM576-PNIO

Separate product references; inclusion does not establish compatibility or interchangeability.

ABB / General ElectricABB DI525General Electric DS200SHVIG1AGeneral Electric DS200PTCTG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200PLIBG1AGeneral Electric DS200PANAH1AGeneral Electric DS200FHVAG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200FCGDH1AGeneral Electric DS200EXPSG1ABBGeneral Electric DS200EXDEG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200DMCBG2AKGGeneral Electric DS200DMCBG2AGeneral Electric DS200ACNAG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7157-0AG83-0XA0 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemUse 6ES7157-0AG83-0XA0 and record the fitted hardware revision before selecting the supplied scope.
2Define the stationMatch the installed AFDiS version and certificate to the complete field circuit.
3Check connectionsRecord main-line wiring, branch numbers, shielding and field-device assignments.
4Review operating limitsCheck branch-specific and complete-device loading rules independently.
5Agree the supplied scopeCheck ambient conditions, mounting and cable entries for the completed enclosure.
6Validate the installationComplete segment communication, branch and process-signal tests before release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4PF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4JF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4FF01-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-1JB31-0XB0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 6ES7157-0AG83-0XA0 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7157-0AG83-0XA0 FAQ

How many protected branches are available on 6ES7157-0AG83-0XA0?AFDiS provides six intrinsically safe FISCO branches. Establish the full circuit approval and device-loading arrangement before connecting the field devices.
Are all six version 01 branches assigned the same current limit?No. Branch 1 permits up to 60 mA, while branches 2–6 permit up to 40 mA each. Apply the fitted-version data and the overall device loading limits together.
Does AFDiS isolate the field branches from the main line?It provides galvanic isolation between the main line and branches and includes a repeater function. These features form part of the complete fieldbus segment design.
Which process fieldbus technologies are supported by AFDiS?The documented technologies are PROFIBUS PA and FOUNDATION Fieldbus H1. Select the appropriate segment configuration and verify the connected field-device requirements.
What bus-powered operating range is specified for AFDiS?The supply range is 16–32 VDC. Evaluate the installed main-line voltage and the complete load arrangement rather than considering one branch in isolation.
Can the branch-current limits simply be added to define total device loading?Do not use that sum as the complete-device allowance. Individual branches and the distributor as a whole have separate loading conditions that must be checked for the fitted version.
What environmental temperature range is given for operation?The documented operating ambient is −40 to +70 °C. Confirm that the actual mounting location and enclosure conditions remain within the applicable installation requirements.
What should be inspected after opening the AFDiS enclosure?Check cable entries, unused-entry closures, seals and enclosure fastening before re-energizing. Restore the required IP66 enclosure installation and the approved hazardous-area arrangement.
Does the repeater feature allow arbitrary segment topology?No. The network still requires an engineered main line, branch allocation and cable arrangement. Preserve the segment drawing and validate the changed connection layout.
What documentation should support an AFDiS replacement?Keep the complete requested identity, fitted version, certificate identification, segment drawing and numbered branch loads. Record restored communication and the required field-signal acceptance results.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens Active field distribution

Applications & Why Choose Nordwel

Application and maintenance planning for 6ES7157-0AG83-0XA0 in the correctly matched installation.

Application areas

01Intrinsically safe field branchesDistribute a segment within an approved FISCO installation.
02Isolated fieldbus couplingUse the separated repeating path in a supported PA or H1 design.
03Unequal branch-load planningAllocate devices to numbered branches using the applicable limits.
04Hazardous-area maintenancePreserve circuit records and validate the restored field installation.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Release the installation only after its configured function and required acceptance checks agree.
Need help matching 6ES7157-0AG83-0XA0 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp