A two-slot RX3i universal-backplane supply with wide-range AC/DC input, load-sharing capability and redundancy support.
Brand:
General ElectricGoods Stock:
1Part Number:
IC695PSA140JDescription:
A two-slot RX3i universal-backplane supply with wide-range AC/DC input, load-sharing capability and redundancy support.Supports engineered load-sharing arrangements.
Can be applied where supported redundant power is required.
Occupies two backplane positions.
J identifies the requested label revision.
| Exact catalogue number | IC695PSA140J |
|---|---|
| Nominal input | 120/240 VAC or 125 VDC |
| Operating input range | 85–264 VAC or 100–300 VDC |
| Total output capacity | 40 W across backplane loads |
| Backplane occupancy | Two slots |
| Input-to-backplane isolation | 250 VAC continuous; 1500 VAC for 1 minute |
| Load sharing / redundancy | Supported |
| J revision context | October 2021 label update for new certifications |
| Operating temperature | 0 to 60 °C |
| Storage temperature | −40 to +85 °C |
| Relative humidity | 5% to 95%, noncondensing |
Values are limited to published Emerson/GE product, installation or release documentation. The complete suffix is retained for exact-model control.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Use this six-step review to keep quotation, compatibility and receiving decisions tied to the complete requested code.
Use IC695PSA140J exactly as shown on the label or requisition.
Provides 40 W backplane power from 120/240 VAC or 125 VDC input and supports load-sharing and redundant power configurations.
Identify the PACSystems RX3i universal backplane hardware and surrounding configuration.
Compare power, backplane, network, optical or firmware requirements as applicable.
Include environment, approvals, shutdown window and receiving inspection needs.
Send the evidence to Tiffany Guan for an exact-code quotation.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Industrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetIndustrial replacement reference for exact-model review.
Tiffany-verified targetModel-specific answers for compatibility, installation, replacement and commissioning questions.
Match the complete IC695PSA140J code.
Record the installed PACSystems RX3i universal backplane context.
Back up settings, firmware or network details where applicable.
Plan measurable checks before return to service.
The IC695PSA140 base model supports load sharing and redundancy, while the non-sharing IC695PSA040 base model does not.
The official release notice identifies IC695PSA140J as an October 2021 release with product labels updated for new certifications.
No. The total load, sharing arrangement, backplane positions and failure scenario still require engineering review.
Official data lists 85–264 VAC or 100–300 VDC operation, with nominal 120/240 VAC or 125 VDC input.
The published capacity is 40 W across the supported backplane loads.
IC695PSA140 occupies two slots in the RX3i universal backplane.
Record Power, P/S Fault, Overload and Overtemperature status after the rack reaches its normal operating load.
Do not assume automatic interchangeability. Match the full code and review certification, firmware and site documentation.
The official specification lists 0–60 °C operation, −40 to +85 °C storage and 5%–95% noncondensing humidity.
Provide both installed supply codes, rack load, wiring arrangement, label photos, quantity and destination.
Directory links stay within Nordwel; use the contact block above for an exact-model review.
The checkpoint list supports enquiry preparation; the installed design and official instructions remain controlling.
A two-slot RX3i universal-backplane supply with wide-range AC/DC input, load-sharing capability and redundancy support.
Provides 40 W backplane power from 120/240 VAC or 125 VDC input and supports load-sharing and redundant power configurations.
Exact J revision released with updated certification labelling; full IC695PSA140J identity retained for receiving control.
A two-slot RX3i universal-backplane supply with wide-range AC/DC input, load-sharing capability and redundancy support.
Use the complete order code for controlled maintenance and receiving.
Reduces ambiguity by retaining the complete suffix.
Keeps installation checks aligned with official parameters.
Supports faster quotation review with clear site evidence.
Creates a practical commissioning record for maintenance teams.
Use this reference to prepare the enquiry and installation package for IC695PSA140J.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
