other
Products
Siemens 6DL3100-8AC05 AddFEM interface module product image
Siemens 6DL3100-8AC05 AddFEM interface module product image
Siemens 6DL3100-8AC05 AddFEM interface module product image

Siemens 6DL3100-8AC05 AddFEM interface module

EMAIL SALES
Manufacturer data reviewed
6DL3100-8AC05 — AddFEM interface module

6DL3100-8AC05 integrates field-device data over PROFIBUS DP-V1. Its GSD SiT680A3 configuration supports diagnostic interrupts and acyclic jobs.

SiemensAddFEM process-control interfacesExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6DL3100-8AC05 verified profile
ManufacturerSiemens
Exact model6DL3100-8AC05
Product typeAddFEM interface module
Product familyAddFEM process-control interfaces
Primary roleField-data integration
Interface contextPROFIBUS DP-V1, SiT680A3
  • Brand:

    SIEMENS
  • Item NO.:

    6DL3100-8AC05
  • Goods Stock:

    1
  • Part Number:

    Siemens
  • Weight:

    6DL3100-8AC05
  • Dimensions:

    AddFEM interface module
  • Manufacture Year:

    AddFEM process-control interfaces
  • Certification:

    Field-data integration
  • Description:

    PROFIBUS DP-V1, SiT680A3
6DL3100-8AC05 configuration inquiry

Get a precise quote for 6DL3100-8AC05

Email Sales
Sales managerTiffany Guan

6DL3100-8AC05 official identification

Field-data integration. PROFIBUS DP-V1, SiT680A3.

Installed roleField-data integration
Interface contextPROFIBUS DP-V1, SiT680A3
Exact-code controlUse 6DL3100-8AC05 without suffix substitution.
Evidence basisOfficial Siemens AddFEM manual

Engineering and installation checks

  • Confirm 6DL3100-8AC05 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

6DL3100-8AC05 key specifications

Exact article number6DL3100-8AC05
Module familyAddFEM
FieldbusPROFIBUS DP-V1
GSD identifierSiT680A3
RedundancyRedundant standard slave supported
DiagnosticsDiagnostic interrupts supported
Parameter assignmentAcyclic DP-V1 jobs
Front-end functionsPoCo, PoCo Plus and SoE

Source: Official Siemens AddFEM manual.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm 6DL3100-8AC05 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
6DL3100-8AC05
Product family
AddFEM process-control interfaces
Installed role
Field-data integration
Interface boundary
PROFIBUS DP-V1, SiT680A3
Verification source
Official Siemens AddFEM manual
Final selection: match the complete 6DL3100-8AC05 identity before order release.
Recommended model families

More Siemens models

Siemens selection 01Siemens 6AV3515-1MA30Siemens 6AV3515-1MA22-1AA0Siemens 6AV3505-1FB12

Confirm the complete order code and installed-system context before replacement.

Siemens selection 02Siemens 6AV3017-1NE30-0AX0Siemens 6AV2124-0MC01-0AB0Siemens 6AV2124-0QC02-0AX2

Confirm the complete order code and installed-system context before replacement.

Siemens selection 03Siemens 6AV2124-1DC01-0XA0Siemens 6AV2124-2DC01-0AB0Siemens 6AV3688-3EH47-0AX0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 04Siemens 6AV3617-1JC30-0AX2Siemens 6AV3617-1JC00-0AX1Siemens 6AV3607-1JC02-0AX1

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01ABB GJR2370100R1000ABB GJR2371100R1040 88VP02-EABB TKS-P20-541I-N001

Confirm the complete order code and installed-system context before replacement.

Additional selection 02ABB PFRL101B-1.0KNGE IC695SPF002BGE IC695RMX228-ACAB

Confirm the complete order code and installed-system context before replacement.

Additional selection 03GE IC695PSD040MGE IC695PSD040GE IC695PNS001-BCBD

Confirm the complete order code and installed-system context before replacement.

Additional selection 04GE IC695PSA040KGE IC695PSA140JGE IC695PSD040H

Confirm the complete order code and installed-system context before replacement.

Additional selection 05Siemens 6AV6542-0DA10-0AX0Siemens 6AV6642-8BA10-0AA0Siemens 6AV6542-0AC15-2AX0

Confirm the complete order code and installed-system context before replacement.

Additional selection 06Siemens 6AV6381-2BN07-0AV0Siemens 6AV2125-2AE03-0AX0Siemens 6AV2125-2AE13-0AX0

Confirm the complete order code and installed-system context before replacement.

Additional selection 07ABB DO525ABB CM576-PNIOABB DI525

Confirm the complete order code and installed-system context before replacement.

Additional selection 08ABB 3HAC14551-1/01CABB 3HAC025338-001ABB GJR2326500R1010 88VU01A

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

6DL3100-8AC05 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order code6DL3100-8AC05
2Capture the full nameplatePROFIBUS DP-V1, SiT680A3
3Record the installed contextPROFIBUS DP-V1, SiT680A3
4Verify interfaces and settingsPROFIBUS DP-V1, SiT680A3
5Plan commissioning checksPROFIBUS DP-V1, SiT680A3
6Request an exact-code quotationPROFIBUS DP-V1, SiT680A3

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for 6DL3100-8AC05.

Company services

Exact-model checkReview 6DL3100-8AC05, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

6DL3100-8AC05 FAQ

What should receiving inspection confirm about order-code control for 6DL3100-8AC05?

Inspect order-code control by checking the full model marking, housing, connectors, keying, accessories and quantity against the purchase record. Quarantine damaged or mismatched hardware instead of installing it.

What checks are required for PROFIBUS station setup during commissioning of 6DL3100-8AC05?

For PROFIBUS station setup, begin with identity, supply and configuration checks before enabling field signals or loads. Record startup indications and compare them with the expected healthy state.

Which site checks support correct acyclic DP-V1 job access for 6DL3100-8AC05?

Treat acyclic DP-V1 job access as an installation checkpoint for position, mechanical fit, connector condition and cable access. Do not force the module or alter keying to make it fit.

What must be ready before commissioning 6DL3100-8AC05 for redundant standard-slave changeover?

Carry out redundant standard-slave changeover during a controlled startup with the affected process or machine protected from unintended action. The documented redundancy is Redundant standard slave supported. Confirm communication, diagnostics and the assigned function before normal operation.

What should the commissioning plan include for diagnostic interrupt testing on 6DL3100-8AC05?

Prepare for diagnostic interrupt testing with the approved configuration loaded, connections checked and dependent equipment in a safe state. The documented diagnostics are Diagnostic interrupts supported. Verify diagnostics first, then test only the intended function.

How should wiring be checked for PoCo signal mapping on 6DL3100-8AC05?

For PoCo signal mapping, compare the installed connection map with the exact 6DL3100-8AC05 interface. Visual similarity is not enough; verify pin or terminal function before moving any wire.

Which startup checks confirm PoCo Plus setup for 6DL3100-8AC05?

Prepare PoCo Plus setup by restoring the controlled parameters and confirming the host recognizes 6DL3100-8AC05. Use a staged functional test and stop if an unexpected diagnostic appears.

What prevents an incorrect substitution when reviewing SoE timestamp path for 6DL3100-8AC05?

Manage SoE timestamp path with an as-found record, controlled isolation and a like-for-like comparison of hardware and function. Keep the removed unit available until the replacement passes acceptance.

What should the connection review cover for installed bus termination on 6DL3100-8AC05?

Review installed bus termination against terminal numbers, polarity, signal type, shielding and cable routing on the controlled drawings. Label every conductor before disconnection and verify each point after reconnection.

Which acceptance test demonstrates controlled field acceptance after 6DL3100-8AC05 is installed?

Prove controlled field acceptance by exercising the assigned function under safe test conditions and comparing the response with the approved expectation. The documented fieldbus are PROFIBUS DP-V1. Resolve every deviation before handover.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for 6DL3100-8AC05.

Application areas

01DP-V1 parameter accessUse acyclic PROFIBUS DP-V1 jobs for device parameter assignment through 6DL3100-8AC05.
02Field-data acquisitionIntegrate AddFEM field information into the documented process-control interface.
03Redundant field interfaceSupport a redundant standard-slave arrangement with the SiT680A3 device definition.
04Event and diagnostic dataCarry diagnostic interrupts and documented PoCo, PoCo Plus or SoE information.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching 6DL3100-8AC05?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp