other
Products
ATSA3S-0 Pressure Clamp Terminal for Analog Input
ATSA3S-0 Pressure Clamp Terminal for Analog Input
ATSA3S-0 Pressure Clamp Terminal for Analog Input

Yokogawa ATSA3S-0 Pressure Clamp Terminal for Analog Input

EMAIL SALES
Yokogawa official data reviewed
ATSA3S-0 — Pressure Clamp Terminal for Analog Input

A pressure-clamp terminal option documented for the Yokogawa ASI133 4–20 mA analog input module with built-in barrier.

Terminal block for FIO modules with built-in barrierAnalog input field terminationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyTerminal block for FIO modules with built-in barrier
Exact modelATSA3S-0
Product typePressure Clamp Terminal for Analog Input
Associated channels8, isolated
Outline reference60.5 × 32.6 × 114 mm
Associated moduleASI133
Associated signal4–20 mA analog input
Verified functionAnalog input field termination
  • Brand:

    Others
  • Item NO.:

    ATSA3S-0
  • Goods Stock:

    1
  • Part Number:

    ATSA3S-0
  • Description:

    A pressure-clamp terminal option documented for the Yokogawa ASI133 4–20 mA analog input module with built-in barrier.
ATSA3S-0 configuration inquiry

Get a precise quote for ATSA3S-0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

ATSA3S-0 official identification

A pressure-clamp terminal option documented for the Yokogawa ASI133 4–20 mA analog input module with built-in barrier.

Complete modelATSA3S-0
Documented familyTerminal block for FIO modules with built-in barrier
Verified functionAnalog input field termination
Interface or ordering factPressure clamp terminal for ASI133

Engineering and installation checks

  • Keep the complete designation ATSA3S-0 in the quotation and receiving record.
  • Confirm the ASI133 module identity and the single-terminal arrangement before removal.
  • Manufacturer verification basis: Yokogawa GS 33K50F80-50E and GS 33J60H40-01EN.
Official product data

ATSA3S-0 key specifications

Terminal function Analog input
Configuration Pressure clamp terminal
Associated module ASI133
Associated signal 4–20 mA analog input
Associated channels 8, isolated
Outline reference 60.5 × 32.6 × 114 mm

Source: Yokogawa GS 33K50F80-50E and GS 33J60H40-01EN.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Confirm the ASI133 module identity and the single-terminal arrangement before removal.
  • Record field polarity, shielding and channel assignments.
  • Inspect clamp condition and conductor preparation before reconnection.
  • Complete loop-current and barrier-system checks after installation.
Record the as-found installation and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed mechanical arrangement, connection and measurement chain.

Associated module
ASI133
Signal direction
Analog input
Signal range
4–20 mA
Terminal form
Pressure clamp
Redundancy
Use ATSA3D-0 for the documented dual-redundant option
Final selection: Use the complete ATSA3S-0 designation. Confirm the installed I/O module, connection accessories and project release before replacement.
Recommended model families

More Yokogawa models

Yokogawa verified models 01Yokogawa CP333D S3Yokogawa ANB10D-427/CU2TYokogawa ANB10D-427/CU2N

ATSA3S-0 — Identity focus: compare Yokogawa CP333D S3 and Yokogawa ANB10D-427/CU2T by complete model code.

Yokogawa verified models 02Yokogawa EC402-51Yokogawa AFV30D-A41262Yokogawa SNB10D-425/CU2T

ATSA3S-0 — Application check: review the documented role of Yokogawa SNB10D-425/CU2T before selection.

Yokogawa verified models 03Yokogawa SNB10D-425/CU2NYokogawa S2SC70D-FA412010Yokogawa ALF111-S50

ATSA3S-0 — Interface check: confirm Yokogawa SNB10D-425/CU2N connector and communication requirements.

Yokogawa verified models 04Yokogawa NFLP121-S00Yokogawa NFCCC01Yokogawa NFBU200-S05

ATSA3S-0 — Installation check: match Yokogawa NFCCC01 mounting and cabinet conditions.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB 086364-001ABB ACS880-04-330A-7ABB NTR012-A

ATSA3S-0 — Electrical check: verify ABB NTR012-A supply and signal limits.

Tiffany verified models 02ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

ATSA3S-0 — Revision control: retain every suffix shown for ABB NDBU-95 64008366D.

Tiffany verified models 03ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

ATSA3S-0 — Replacement scope: treat ABB 3BHE019633R0101 PDD200A101 as a separate configuration.

Tiffany verified models 04ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901Schneider BMXDDO1602

ATSA3S-0 — Project matching: reconcile Schneider BMXDDO1602 with approved drawings and slot data.

Tiffany verified models 05Schneider BMENOC0301GE SST-PFB3-VME2Woodhead SST-DNP-PCI-4

ATSA3S-0 — Receiving check: inspect the full identity of Schneider BMENOC0301 on arrival.

Tiffany verified models 06Vibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222Westinghouse 5X00241G02

ATSA3S-0 — Commissioning note: keep Vibro-Meter S3960 AC46286 / 144-201-000-222 settings and wiring records distinct.

Tiffany verified models 07Westinghouse 5X00058G01Westinghouse 5X00226G01AREVA MVAJ101RA0802A

ATSA3S-0 — Availability review: request AREVA MVAJ101RA0802A using its complete published designation.

Tiffany verified models 08Bently Nevada 21505-00-28-05-02Pepperl+Fuchs RSD-GW3-Ex2.DPELoad Cell Central OM-19-2

ATSA3S-0 — Final shortlist: select Bently Nevada 21505-00-28-05-02 only after technical evidence agrees.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

ATSA3S-0 Order Guide

Use the complete Yokogawa designation and installed hardware record for engineering review.
1Exact identityATSA3S-0 must be retained without shortening or normalizing its suffixes.
2Product familyTerminal block for FIO modules with built-in barrier / Pressure Clamp Terminal for Analog Input
3Primary functionAnalog input field termination
4Mechanical checkASI133
5Connection checkPressure clamp terminal for ASI133
6Official sourceYokogawa GS 33K50F80-50E and GS 33J60H40-01EN

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Model verificationCompare the complete Yokogawa code and installed nameplate.
Compatibility reviewCheck mounting, connection, system length, approvals and application context.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation boundaryUse only manufacturer-published facts; undocumented values are not inferred.

ATSA3S-0 FAQ

During receiving inspection, how should ATSA3S-0 be identified?

Retain the complete ATSA3S-0 designation and compare it with the installed nameplate, approved parts list and removal photographs. A shortened family code is not an exact match.

What official product role is documented for ATSA3S-0?

ATSA3S-0 is reviewed as Pressure Clamp Terminal for Analog Input. The documented role is Analog input field termination; site suitability still depends on the approved project record.

Which host hardware must be checked before fitting ATSA3S-0?

Confirm ASI133, the installed carrier or base, keying, adjacent hardware and every mating connection before approval.

What connection evidence is required for ATSA3S-0?

The reviewed interface is Pressure clamp terminal for ASI133. Preserve terminal assignments, cable identification, shielding, grounding and protective-device records before disconnection.

Can a similar suffix replace ATSA3S-0 without a separate review?

No. Treat every suffix and revision as configuration-controlled. Compare the complete ordering code and manufacturer documentation before accepting a substitute.

Which installation conditions belong in the ATSA3S-0 work pack?

Confirm the ASI133 module identity and the single-terminal arrangement before removal. Also record enclosure protection, temperature, humidity, contamination, grounding, mounting direction and access for inspection.

What should technicians test after installing ATSA3S-0?

Complete the manufacturer-required power-up checks, diagnostics, channel or signal verification and a controlled functional test. Retain the results with the commissioning record.

What should a quotation request for ATSA3S-0 include?

Provide ATSA3S-0, quantity, destination, clear nameplate images, installed-system context, mating hardware and required schedule to Tiffany Guan.

Which value leads the specification review for ATSA3S-0?

Start with the manufacturer-published value Analog input, then verify every other listed parameter against the full code and the as-installed configuration.

What data boundary applies to this ATSA3S-0 page?

Use the complete ATSA3S-0 designation. Confirm the installed I/O module, connection accessories and project release before replacement.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Terminal block for FIO modules with built-in barrier application review

ATSA3S-0 Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · Built-in-barrier analog input terminationUse ATSA3S-0 only where the manufacturer-documented function and the approved project conditions match.
02 · 4–20 mA field-loop replacementUse ATSA3S-0 only where the manufacturer-documented function and the approved project conditions match.
03 · FIO node maintenanceUse ATSA3S-0 only where the manufacturer-documented function and the approved project conditions match.
04 · Exact terminal-block sourcingUse ATSA3S-0 only where the manufacturer-documented function and the approved project conditions match.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify ATSA3S-0. Check first: Confirm the ASI133 module identity and the single-terminal arrangement before removal.
Need help matching this Yokogawa configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp