other
Products
RPBA-01 3ABD64606859

ABB RPBA-01 3ABD64606859 PROFIBUS-DP Adapter Module

EMAIL SALES
ABB OFFICIAL DATA REVIEWED
RPBA-01 3ABD64606859 - PROFIBUS-DP Adapter Module

ABB identifies RPBA-01 as a PROFIBUS-DP adapter module installed in the option slot on a drive control board. ABB's official catalog lists article number 64606859.

ABB drive option modulesPROFIBUS DPExact-order review
SALES CONTACT
Stella
TEL / WHATSAPP
RPBA-01 3ABD64606859 VERIFIED PROFILE
PRODUCT FAMILYABB drive option modules
EXACT MODELRPBA-01 3ABD64606859
PRODUCT TYPEPROFIBUS-DP Adapter Module
MANUFACTURERABB
OFFICIAL ARTICLE NUMBER64606859
OFFICIAL DOCUMENTATIONRPBA-01 User's Manual
WARRANTYWith 1 year warranty
COUNTRY OF ORIGINSWEDEN
  • Brand:

    ABB
  • Item NO.:

    RPBA-01 3ABD64606859
RPBA-01 CONFIGURATION INQUIRY

Confirm RPBA-01 3ABD64606859 before ordering

Email Sales
SALES CONTACTStella
WHATSAPP+8618159889985

RPBA-01 3ABD64606859 official identification

ABB documentation identifies RPBA-01 as a PROFIBUS-DP adapter module installed in the option slot on a drive control board. The official ABB catalog lists article number 64606859. Confirm the supplied complete ordering designation against the nameplate.

Complete modelRPBA-01 3ABD64606859
Documented familyABB drive option modules
Product typePROFIBUS-DP Adapter Module
Official catalog article64606859

Engineering and installation checks

  • Retain the complete target designation RPBA-01 3ABD64606859 in the quotation and receiving record.
  • Verify the drive model, control-board option slot, firmware, PROFIBUS network settings and installed cabling.
  • Confirm node address and bus-termination settings before commissioning.
OFFICIAL PRODUCT DATA

RPBA-01 key specifications

Manufacturer ABB
Product type PROFIBUS-DP Adapter Module
Communication protocol PROFIBUS DP
Installation location Drive control-board option slot
Official article number 64606859
Degree of protection IP20
Node address range 00-99
Hardware settings Rotary node-address switches and bus-termination DIP switch
Warranty With 1 year warranty
Country of originS
SWEDEN

Source: ABB RPBA-01 PROFIBUS-DP Adapter User's Manual.

PRE-ORDER CHECK 01

Installation environment

Match the module to the drive hardware manual and the documented option-slot arrangement.

  • Confirm the complete drive model and control unit.
  • Record the existing node address and bus termination.
  • Verify the PROFIBUS cable, connector and shielding.
  • Confirm ambient conditions from the drive hardware manual.

Record the as-found configuration before removal.

PRE-ORDER CHECK 02

Compatibility confirmation

Confirm the installed ABB drive, option-slot arrangement, firmware and PROFIBUS network configuration before ordering.

Drive model
Confirm exact ABB drive designation
Option slot
Confirm the supported control-board option slot
Firmware and parameters
Confirm against the installed drive documentation
PROFIBUS network
Confirm connector, cable, node address and termination

Final selection depends on the complete model, nameplate, installed configuration and ABB documentation.

ADDITIONAL PUBLISHED BRANDS

Additional Advantage Models

BENTLY NEVADA 3500 SYSTEM

3500/50 133442-01
Tachometer module reference

3500/53 133396-01
Overspeed detection system reference

3500/22 146031-01
Transient data interface reference

ABB CONTROL SYSTEMS

ABB PM861AK01 3BSE018157R1
Processor unit reference

ABB CI840A 3BSE041882R1
Communication interface reference

ABB AI880A 3BSE039293R1 TU844 3BSE021445R1
Analog input and termination reference

ALLEN-BRADLEY CONTROL

ALLEN-BRADLEY 1756-PA75R/A
Redundant power-supply reference

ALLEN-BRADLEY 1756-PB75R/A
Redundant power-supply reference

Allen Bradley 1756-IF8
Analog input module reference

GE CONTROL SYSTEMS

GE IC200CPU002-JG
Controller reference

GE IC200MDL940A
Relay output module reference

GE IC200CHS022L
Carrier base reference

SIEMENS AUTOMATION

SIEMENS 5WG1140-1AB13
Building-control component reference

SIEMENS 6AV2123-2DB03-0AX0 KTP4000
Operator-interface reference

Siemens 3TF3001-0XL2
Contactor reference

BENTLY NEVADA MONITORING

3500/32M 149986-02NC
Relay module reference

3500/15 126399-01G
Power-supply module reference

3500/92 136180-01
Communication gateway reference

INDUSTRIAL INSTRUMENTATION

Honeywell P8000A0007G
Honeywell control component reference

FBM214 P0922VT
Fieldbus module reference

PANAMETRICS 061088-A
Panametrics instrument reference

These cross-brand industrial spare references are not direct substitutes for RPBA-01 3ABD64606859. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.

CHECK WITH SALES
ORDER GUIDE

How to specify RPBA-01 3ABD64606859

Use the complete nameplate, installed drive information and ABB documentation. Do not order from a shortened module name alone.

Complete designation

State RPBA-01 3ABD64606859 exactly as supplied.

Brand and family

Confirm ABB and the installed drive option-module family.

Product type

Confirm PROFIBUS-DP Adapter Module.

Article-number check

ABB's official catalog lists 64606859; reconcile this with the complete nameplate designation.

Drive and control board

Provide drive model, control unit, option slot and firmware revision.

Network interface

Record PROFIBUS connector, cable, shielding, node address and bus termination.

Installation environment

Confirm conditions in the applicable drive hardware manual.

Compatibility approval

Verify the complete installed-system configuration before ordering.

Inquiry package

Send nameplate photos, drive model, existing module markings and manufacturer documents.

Official source

ABB RPBA-01 User's Manual

Published ABB references for configuration review

Each linked model has a published Nordwel product page. Confirm exact function and compatibility independently.

ABB PUBLISHED MODEL | EXACT-MODEL REVIEWABB RDCO-02C 3ABD64606956

DDCS channel board. Review its system role separately; it is not identified as a direct replacement for RPBA-01.

Published Nordwel page
ABB PUBLISHED MODEL | EXACT-MODEL REVIEWABB RRIA-01 3ABD68486408

Resolver interface module. Review its system role separately; it is not identified as a direct replacement for RPBA-01.

Published Nordwel page
ABB PUBLISHED MODEL | EXACT-MODEL REVIEWABB RBIP-01 3AUA0000030932

BACnet/IP router module. Review its system role separately; it is not identified as a direct replacement for RPBA-01.

Published Nordwel page
ABB PUBLISHED MODEL | EXACT-MODEL REVIEWABB FIO-11

Analog I/O extension. Review its system role separately; it is not identified as a direct replacement for RPBA-01.

Published Nordwel page
ABB PUBLISHED MODEL | EXACT-MODEL REVIEWABB NDCU-11CK 64053868B

Drive control unit. Review its system role separately; it is not identified as a direct replacement for RPBA-01.

Published Nordwel page
ABB PUBLISHED MODEL | EXACT-MODEL REVIEWABB FDPI-02 3AUA0000108650

Panel bus adapter kit. Review its system role separately; it is not identified as a direct replacement for RPBA-01.

Published Nordwel page
SERVICE

RPBA-01 exact-model support

Nordwel supports order-code review, installed-drive compatibility checks and documentation coordination for RPBA-01 3ABD64606859.

Support scope

Model verification

Check RPBA-01 and the complete 3ABD64606859 designation.

Nameplate review

Compare module, drive, control-board and firmware records.

Compatibility review

Review option slot, PROFIBUS network and installed accessories.

Quotation coordination

Prepare the exact-model request for commercial follow-up.

Document confirmation

Use the ABB manual and applicable drive hardware documentation.

Commissioning record

Retain node address, termination and cabling information.

Frequently asked questions

What is RPBA-01?

ABB identifies it as a PROFIBUS-DP adapter module for installation in a drive control-board option slot.

Does 64606859 match the official catalog?

ABB's official catalog lists article number 64606859. Confirm the complete supplied designation 3ABD64606859 from the nameplate and purchasing record.

Can compatibility be assumed from the protocol alone?

No. Confirm the drive model, control board, firmware, option slot, connector, node address and ABB documentation.

SALES CONTACTStella
TEL / WHATSAPP+8618159889985
ABB DRIVE AND INTERFACE REFERENCES

Published ABB system directory

Linked entries are published Nordwel pages for related ABB drive, control and interface product categories.

Documentation checks

Drive manualConfirm option-slot support and ambient conditions.
Control boardConfirm the installed board and firmware.
PROFIBUSRecord node address, termination and network parameters.

Related ABB entries are configuration references, not automatic replacements for RPBA-01.

CONNECTION REFERENCES

Accessories and connection items

NETWORK CABLE
PROFIBUS cable

Confirm type, length, shielding and site routing.

NETWORK CONNECTOR
PROFIBUS connector

Confirm connector type and pinout for the installed network.

NETWORK SETTING
Bus termination

Confirm end-of-line location and switch setting.

DRIVE HARDWARE
Control-board option slot

Confirm mechanical fit and supported module arrangement.

Confirm every accessory against the complete drive and network documentation.

APPLICATIONS

RPBA-01 application contexts

Use RPBA-01 where the documented ABB drive and control-board configuration requires a PROFIBUS-DP adapter module. Final suitability depends on the complete drive, network and manufacturer documentation.

PROFIBUS-DP drive integration

Connect a supported ABB drive configuration to a documented PROFIBUS-DP network.

Installed-module replacement review

Compare the complete RPBA-01 order designation, drive option slot and existing settings.

Network commissioning

Confirm connector, cabling, node address and bus termination before operation.

Maintenance planning

Record the installed drive, control board, firmware and PROFIBUS configuration.

Why choose Nordwel

Exact-model review

Complete ABB order-code and nameplate checking.

Configuration-aware support

Drive, option-slot, PROFIBUS and cabling review.

Clear documentation scope

Confirmed ABB data is separated from assumptions.

Confirm the complete model, nameplate, installed configuration and manufacturer documentation before ordering.
Stellasales@askplc.com | +8618159889985
REQUEST CONFIGURATION REVIEW
INDUSTRIAL SPARE PARTS REFERENCE

Industrial Spare Parts Reference

Selected industrial control, monitoring, interface and connection models for exact-order review.

CONTROL PROCESSORABB PM582 / 1SAP140200R0100ABB programmable-automation controller reference.
COMMUNICATIONABB 1SAP176000R0080 CM5640-2ETHABB Ethernet communication module reference.
MOTOR CONTROLABB UMC100 1SAJ530000R0200 / UMC100.3ABB universal motor controller reference.
CONTROL PROCESSORABB PM581 C5 1SAP140100R0100ABB programmable-automation controller reference.
CONTROL PROCESSORABB PM582-ETH 1SAP140200R0270ABB Ethernet controller reference.
ANALOG OUTPUTABB AO523 1SAP450200R0001ABB analog output module reference.
TURBINE CONTROLGE IC3600LIVF1AGE turbine-control board reference.
TURBINE CONTROLGE IC3600SSLB1GGE turbine-control board reference.
ANALOG INPUTGE IC200ALG620-FDGE VersaMax analog input module reference.
ANALOG OUTPUTGE IC200ALG331-KDGE VersaMax analog output module reference.
ANALOG I/OGE IC200ALG260HGE VersaMax analog I/O module reference.
DISCRETE I/OGE IC200MDD844FGE VersaMax mixed discrete module reference.
DRIVE SYSTEMAllen Bradley 80025-523-10-RAllen-Bradley drive-system component reference.
OPERATOR INTERFACEAllen Bradley 2706-LV2PAllen-Bradley operator-message display reference.
INTERFACE MODULEAllen-Bradley 1492-XIM2024-16RAllen-Bradley interface module reference.
MOTOR PROTECTIONAllen Bradley 193-EA4EBAllen-Bradley electronic overload relay reference.
POWER SUPPLYAllen Bradley 1606-XL 480E-3/AAllen-Bradley industrial power-supply reference.
PLC BASE UNITAllen Bradley 1764-28BXBAllen-Bradley MicroLogix base-unit reference.
BUILDING CONTROLSIEMENS 5WG1140-1AB13Siemens building-control component reference.
OPERATOR INTERFACESIEMENS 6AV2123-2DB03-0AX0 KTP4000Siemens operator-interface reference.
CONTACTORSiemens 3TF3001-0XL2Siemens contactor reference.
INDUSTRIAL CONTROLHoneywell P8000A0007GHoneywell control component reference.
SAFETY SYSTEMT9090MICS Triplex SIS Work Station Media.
I/O CONNECTIONTC-505-02-12M5ICS Triplex I/O SmartSlot.
EXPANSION CABLETC-312-02ICS Triplex Local Expansion Cable Assembly.
EXPANSION CABLETC-311-02ICS Triplex Local Expansion Cable Assembly.
JUMPER CABLETC-308-02ICS Triplex Output SmartSlot Jumper Cable.
EXPANDER CABLETC-303-02-4M0ICS Triplex Remote Expander Cable.
I/O CONNECTIONTC-801-02-6M5ICS Triplex I/O Companion Slot.
FUSE MODULET8903ICS Triplex Fuse Module.

These references are not direct substitutes for RPBA-01 3ABD64606859. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp