other
Products
Bently Nevada 330730-040-12-00 exact model
Bently Nevada 330730-040-12-00 exact model
Bently Nevada 330730-040-12-00 exact model

Bently Nevada 330730-040-12-00 3300 XL 11 mm FluidLoc Extension Cable

EMAIL SALES
Official manufacturer context reviewed
3300 XL 11 mm FluidLoc Extension Cable

A 4.0 m 3300 XL 11 mm extension cable with the exact FluidLoc and connector-protector option encoded by 330730-040-12-00.

11 mm system4.0 mFluidLocConnector protector
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
330730-040-12-00 verified profile
Product family3300 XL 11 mm Proximity Transducer System
Exact model330730-040-12-00
Cable length4.0 m
Cable constructionFluidLoc
Connector protectionIncluded
Approval option00 — approval not required
  • Brand:

    Bently Nevada
  • Item NO.:

    330730-040-12-00
  • Part Number:

    330730-040-12-00
  • Description:

    3300 XL 11 mm FluidLoc Extension Cable
Exact-model configuration inquiry

Get a precise quote for 330730-040-12-00

Email Sales
Sales managerTiffany Guan

Product role and selection context

330730-040-12-00 is an extension cable for the 3300 XL 11 mm Proximity Transducer System. Correct selection depends on cable length, cable construction, connector protection and the complete electrical system length.

Primary roleConnects the 11 mm probe to its Proximitor Sensor
Nominal length4.0 m
Cable optionFluidLoc cable with connector protector
Selection controlMatch probe plus extension cable to the sensor total length

Engineering and installation checks

  • Retain the full code 330730-040-12-00 throughout procurement and receiving.
  • Do not substitute an 8 mm or NSv cable family on visual similarity.
  • Use only the option meanings published in Baker Hughes Bently Nevada datasheet 146256.
Official product data

330730-040-12-00 key specifications

Exact model330730-040-12-00
Product family3300 XL 11 mm Proximity Transducer System
ComponentExtension cable
Nominal cable length4.0 m
Cable and connector optionFluidLoc cable with connector protector
Approval option00 — approval not required
System-length ruleProbe length plus extension-cable length must equal the Proximitor Sensor total length

Source: Baker Hughes Bently Nevada datasheet 146256.

Pre-order check 01

Installation environment

Verify the installed mechanical, wiring and environmental conditions before this exact configuration is removed or energized.

  • Confirm that the 4.0 m extension cable plus the installed probe length equals the selected sensor system length.
  • Route 330730-040-12-00 with at least the documented 25.4 mm minimum bend radius.
  • Inspect the connector protector and FluidLoc cable surfaces before connection.
  • Record the as-found gap voltage, reconnection checks and final signal validation.
Record the as-found installation and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed mechanical arrangement, connection and measurement chain.

Complete identity
330730-040-12-00
Probe family
3300 XL 11 mm
Cable length
4.0 m
Cable / connector
FluidLoc cable with connector protector
Sensor total length
Must match the complete 5 m or 9 m system configuration
Final selection: match 330730-040-12-00 to the complete installed mechanical arrangement, cable or probe option, approval record and receiving documentation before commissioning.
Recommended model families

More Bently Nevada models

Front / main modules3500/40M Proximitor Monitor3500/42M Proximitor/Seismic Monitor3500/25 Keyphasor Module

Monitor families for proximity, seismic and phase-reference inputs.

Rear / I/O modules3500/22M Rear I/O Module3500/40M I/O Module3500/42M I/O Module

Select the I/O option that matches the installed front module and barrier configuration.

Extension cable families3300 XL 8 mm Extension Cable3300 XL 11 mm Extension Cable3300 XL NSv Extension Cable

Match the probe family, total system length and connector arrangement.

Proximitor sensor families3300 XL 8 mm Proximitor Sensor3300 XL 11 mm Proximitor Sensor3300 XL NSv Proximitor Sensor

Keep the probe, extension cable and Proximitor sensor within the same system family.

Additional published brands

Additional Advantage Models

VIPAVIPA 315-2AG12 / CPU315SB DPMVIPA 315-2AG10 / CPU 315SBVIPA CC02-01309-000 / C787

Selected VIPA CPU and controller products already published on Nordwel.

WESTINGHOUSEWestinghouse 5X00241G02Westinghouse 5X00058G01Westinghouse 5X00226G01

Selected Westinghouse Ovation processor, analog-input and I/O interface products published on Nordwel.

Tiffany verified models 01ABB 086364-001ABB ACS880-04-330A-7ABB NTR012-A

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901Schneider BMXDDO1602

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Schneider BMENOC0301GE SST-PFB3-VME2Woodhead SST-DNP-PCI-4

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Honeywell FC-IOTA-NR24 / 51306507-175Pepperl+Fuchs RSD-GW3-Ex2.DPELoad Cell Central OM-19-2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation.CHECK WITH SALES

330730-040-12-00 Order Guide

A configuration-first checklist for 330730-040-12-00.
1Confirm the 11 mm familyUse the cable only within the documented 3300 XL 11 mm measurement chain.
2Confirm the cable lengthThe ordered length is 4.0 m.
3Confirm the cable optionMatch fluidloc cable with connector protector.
4Balance total system lengthAdd probe and extension-cable lengths and match the Proximitor Sensor total length.
5Inspect connector protectionRecord the connector protector and cable condition before installation.
6Request an exact-code quoteSend 330730-040-12-00, probe length, sensor identity, quantity and destination.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Honeywell / I/O TerminationFC-IOTA-NR24 / 51306507-175

Redundant I/O termination assembly for installed control-system applications.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical support for Bently Nevada exact-model selection, quotation and order coordination.

Company services

Exact-model checkReview 330730-040-12-00, the installed equipment record and all configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time against Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

330730-040-12-00 FAQ

What component is 330730-040-12-00?It is a 3300 XL 11 mm extension cable in the manufacturer ordering structure, configured as a 4.0 m FluidLoc cable with a connector protector.
How long is the 330730-040-12-00 cable?The 040 length option specifies 4.0 m (13.1 ft).
What does option 12 control on this cable?Option 12 specifies FluidLoc cable with a connector protector.
Which sensing family accepts 330730-040-12-00?It belongs to the 3300 XL 11 mm proximity transducer family. Do not select it for a different probe family from appearance alone.
How is total electrical length checked?Add the probe length and the extension-cable length; the result must equal the selected Proximitor Sensor total system length.
Does suffix 00 add a hazardous-area approval?No. In the official 11 mm ordering table, approval option 00 means approval is not required.
What connector inspection is appropriate at receiving?Check the complete order code, connector protector, cable jacket, ferrules and connector faces for identity, cleanliness and damage before installation.
What routing limit protects 330730-040-12-00?Maintain at least the documented 25.4 mm minimum bend radius and support the route so the connectors do not carry cable tension.
Can an extension cable be changed without checking the probe and sensor?No. Confirm the probe family, probe length, cable option and Proximitor Sensor total length as one measurement chain.
What should commissioning record after replacement?Record the as-found configuration, final connection, gap voltage, signal response and controlled alarm-path check.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for 330730-040-12-00 and the support available from our sales team.

Application areas

0111 mm transducer chainsCompletes the electrical path between a 3300 XL 11 mm probe and its Proximitor Sensor.
02System-length correctionSupports a 5 m or 9 m matched chain when probe and cable lengths are selected correctly.
03Fluid-exposure routingFluidLoc construction for installations that require the ordered cable option.
04Maintenance replacementExact cable-length and connector-protection checks during sensor-chain service.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the 11 mm probe family, cable option and complete system length.
Need help matching 330730-040-12-00?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Sensor Systems330180-91-00Bently Nevada proximity sensor reference; confirm total system length and mounting.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp