KEYENCE identifies CA-CH10 as a 10 m camera cable for high-speed cameras in its vision-system product lineup.
Brand:
OthersItem NO.:
VE4005S2B5Goods Stock:
1Part Number:
VE4005S2B5Description:
Emerson lists VE4005S2B5 as a 16-channel 4–20 mA analog output module with HART support in the Series 2 Plus family.KEYENCE lists CA-CH10 as a 10 m camera cable for high-speed cameras in its vision-system model lineup.
| Manufacturer | KEYENCE |
|---|---|
| Exact model | CA-CH10 |
| Product family | KEYENCE Vision Systems Camera Cables |
| Product type | Camera Cable for High-Speed Camera |
| Nominal length | 10 m |
| Documented use | High-speed camera connection |
| Compatibility | Confirm with the applicable KEYENCE camera and controller documentation |
Record the complete cable route and connected hardware before removal or ordering.
Final suitability depends on the exact camera, controller, connector arrangement and installed cable path.
Standard-length camera-cable references; confirm the required length and installed camera/controller combination.
L-shaped connector variants require independent clearance and connection review.
Flex and environment variants are separate ordering codes; do not substitute by length alone.
Repeater and extension components require confirmation of the complete installed signal path.
Twenty-four independent cross-brand industrial spare references; none is a direct substitute for CA-CH10.
ABB industrial spare references. Confirm manufacturer, complete model and revision before ordering.
BENTLY NEVADA industrial spare references. Confirm manufacturer, complete model and revision before ordering.
EMERSON industrial spare references. Confirm manufacturer, complete model and revision before ordering.
SIEMENS industrial spare references. Confirm manufacturer, complete model and revision before ordering.
ALLEN-BRADLEY industrial spare references. Confirm manufacturer, complete model and revision before ordering.
GENERAL ELECTRIC / GE industrial spare references. Confirm manufacturer, complete model and revision before ordering.
HONEYWELL industrial spare references. Confirm manufacturer, complete model and revision before ordering.
ICS TRIPLEX / TRICONEX industrial spare references. Confirm manufacturer, complete model and revision before ordering.
Six published Nordwel products for separate industrial spare-part enquiries.
Processor-unit reference for a separate control-system configuration.
Published Nordwel referenceTachometer I/O module for a separate machinery-monitoring system.
Published Nordwel referenceDeltaV dry-contact card reference for a separate system inquiry.
Published Nordwel referenceSIMATIC interface-module reference for separate configuration review.
Published Nordwel referenceCompactLogix processor-module reference for a separate PLC inquiry.
Published Nordwel referenceController I/O termination assembly for a separate Honeywell system.
Published Nordwel referenceMatch the complete CA-CH10 designation and cable label.
KEYENCE identifies it as a camera cable for a high-speed camera.
The official model name specifies 10 m.
KEYENCE lists it within multiple vision-system model lineups, including XG-X, XG-7000 and CV-5000.
No. The L suffix denotes a separately listed L-shaped connector cable.
Not automatically. Confirm the complete approved ordering code.
Record the exact camera, controller and any repeater or extension components.
Provide CA-CH10, quantity, destination, cable label, connected devices and routing requirements.
Officially listed standard, L-shaped, flex, environment and repeater cable references.
Checks for length, connected hardware, connector arrangement and cable routing.
Confirm the complete cable label.
Verify the approved route requires this length.
Record the connected KEYENCE camera.
Confirm controller-side compatibility.
Check straight or L-shaped requirements.
Confirm whether a flex-resistant variant is required.
Confirm whether an environment-resistant variant is required.
Record any repeater or extension hardware.
Send cable, camera, controller and route details to Stella.
Thirty varied references selected from the supplied TXT inventories for PLC, HMI, sensing, drive, process and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
