other
Products
KCP2 00-130-547 KUKA Robot Teach Pendant
KCP2 00-130-547 KUKA Robot Teach Pendant
KCP2 00-130-547 KUKA Robot Teach Pendant

KUKA KCP2 00-130-547 Robot Teach Pendant for KR C2 edition2005

EMAIL SALES
KUKA official system data reviewed
KCP2 00-130-547 - Robot Teach Pendant

KUKA documentation identifies the KCP as the hand programming unit for the KR C2 edition2005 robot controller. Confirm the complete 00-130-547 material number, pendant nameplate, controller generation, installed connector and safety configuration before ordering.

KCP2 / KR C2 edition2005Robot teach pendantExact-model review
Sales contactStella
Tel / WhatsApp+8618159889985
Officially reviewed product profile
Product familyKCP2 / KR C2 edition2005
Exact modelKCP2 00-130-547
Product typeRobot Teach Pendant / Hand Programming Unit
ManufacturerKUKA
Controller familyKR C2 edition2005
Documented system roleKCP hand programming unit
KCP reference dimensions330 x 260 x 80 mm in KR C2 edition2005 documentation
Selection requirementConfirm complete model, nameplate and controller configuration
  • Brand:

    Others
  • Item NO.:

    KCP2 00-130-547
  • Goods Stock:

    1
  • Part Number:

    KCP2 00-130-547
  • Weight:

    Confirm the complete model, nameplate, installed configuration and manufacturer documentation before ordering.
  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

    KUKA KCP2 00-130-547 robot teach pendant / hand programming unit for a documented KR C2 edition2005 controller context. Confirm the complete 00-130-547 material number, pendant nameplate, controller generation, connector, cable execution, safety circuits and manufacturer documentation before ordering.
KCP2 00-130-547 configuration inquiry

Get a precise quote for KCP2 00-130-547

Email Sales
Sales contactStella
WhatsApp+8618159889985

KCP2 00-130-547 official identification

KUKA technical data identifies the KCP as the hand programming unit for the KR C2 edition2005 robot controller. The complete 00-130-547 material number and installed-system record must control replacement review.

Complete modelKCP2 00-130-547
Documented familyKCP2 / KR C2 edition2005
Verified product typeRobot Teach Pendant / Hand Programming Unit
Official system referenceKUKA KR C2 edition2005 technical data

Engineering and installation checks

  • Retain the complete designation KCP2 00-130-547 in the quotation and receiving record.
  • Confirm the pendant nameplate, KR C2 controller generation, mating connector, cable execution and safety configuration.
  • Use the approved robot-cell isolation, commissioning and safety procedures.
Official product data

KCP2 00-130-547 key specifications

Manufacturer KUKA
Product family KCP2 / KR C2 edition2005
Exact model KCP2 00-130-547
Product type Robot Teach Pendant / Hand Programming Unit
Controller relationship KUKA KR C2 edition2005
Documented system role KCP hand programming unit
KCP reference dimensions 330 x 260 x 80 mm in the KR C2 edition2005 technical data

Source: KUKA KR C2 edition2005 Technical Data.

Pre-order check 01

Installation and safety review

Verify the exact pendant and controller arrangement before removal, connection or commissioning.

  • Confirm 00-130-547 on the pendant nameplate.
  • Confirm the installed KR C2 controller generation and KCP interface.
  • Inspect the cable, connector, housing and operator controls against approved documentation.
  • Confirm emergency-stop, enabling and mode-selection circuits under the site safety procedure.
Do not infer undocumented electrical, display, cable or certification details from similar KCP2 variants.
Pre-order check 02

Compatibility confirmation

Match the complete pendant execution to the installed robot controller and safety architecture.

Pendant identity
KCP2 00-130-547
Controller family
Confirm the installed KUKA KR C2 edition2005 configuration.
Interface
Confirm mating connector, cable execution and controller interface.
Safety controls
Confirm the installed enabling, emergency-stop and mode-selection arrangement.
Documentation
Use the nameplate, robot archive, controller documentation and approved cell drawings.
Final selection: Confirm the complete model, nameplate, installed configuration and manufacturer documentation before ordering.
Cross-brand industrial references

Additional Advantage Models

These cross-brand industrial spare references are not direct substitutes for KCP2 00-130-547. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.

Send the complete pendant nameplate, controller model and installed-system record for review.CHECK WITH SALES

KCP2 00-130-547 Order Guide

Use the complete KUKA material number, pendant nameplate and installed KR C2 controller documentation.
1Exact identityRetain KCP2 00-130-547 without shortening, reformatting or omitting 00-130-547.
2Brand, family and typeKUKA; KCP2 / KR C2 edition2005; robot teach pendant / hand programming unit.
3Controller matchConfirm the complete KR C2 controller generation, software archive and approved cell configuration.
4Interface and cableConfirm the installed connector, cable execution, routing and mechanical condition from the nameplate and manufacturer documentation.
5Safety and environmentConfirm enabling, emergency-stop and mode-selection circuits plus the approved operating environment.
6Inquiry documentationProvide clear nameplate images, quantity, destination, controller model, robot archive context and official KUKA reference.

KUKA KCP2 and KR C2 System References

Related controller and component references for engineering comparison; none is an automatic substitute for the target pendant.

Confirm the complete material number, controller revision and safety configuration before ordering.
KUKA / robot teach pendantKCP2 00-130-547

Target KCP2 hand programming unit; verify the complete nameplate and controller execution.

System relationship reviewed
KUKA / robot controllerKR C2 edition2005

Controller family documented with the KCP hand programming unit.

System relationship reviewed
KUKA / power supply00-205-143

KUKA power-supply reference for system-level review.

System relationship reviewed
KUKA / controller interfaceMFC2 MFC2-IC3

KUKA controller interface / register display reference.

System relationship reviewed
KUKA / safety systemESC-PLATINE

KUKA ESC safety-system board reference.

System relationship reviewed
KUKA / controller power supplyKPS-600/20-ESC

KR C2 power-supply reference; confirm the exact controller revision.

System relationship reviewed
Nordwel engineering support

KCP2 00-130-547 Service & FAQ

Exact-model verification, controller matching, safety review, quotation coordination and official-document confirmation.

Support scope

Model and nameplate verificationCompare 00-130-547, the complete KCP2 nameplate and the installed pendant execution.
Compatibility reviewCheck controller generation, connector, cable, software context and safety circuits.
Quotation coordinationConfirm quantity, destination, availability and required schedule.
Official documentationUse KUKA technical data and approved project records without inferring undocumented values.

KCP2 00-130-547 FAQ

How should the target pendant be identified before quotation?

Match KCP2 00-130-547, the complete nameplate, installed controller generation and robot-cell records.

Which system family is documented by KUKA?

KUKA documents the KCP as the hand programming unit for the KR C2 edition2005 controller.

What product type is being reviewed?

The target is reviewed as a robot teach pendant / hand programming unit.

Can another KCP2 material number be treated as a direct substitute?

No. Confirm the exact material number, controller generation, connector, cable and safety configuration.

Which controller information is required?

Provide the complete KR C2 controller type, installed software context and approved cell documentation.

Which connection details require review?

Confirm the mating connector, cable execution, routing, strain relief and interface condition.

Which safety details require review?

Confirm emergency-stop, enabling and mode-selection circuits under the approved robot safety procedure.

What installation preparation is required?

Place the robot system in the approved controlled state and follow the manufacturer and site isolation procedures.

What should a sourcing request include?

Provide KCP2 00-130-547, quantity, destination, clear nameplate images, controller details and required schedule.

What manufacturer-data boundary applies?

Confirm the complete model, nameplate, installed configuration and manufacturer documentation before ordering.

Sales contactStella
Tel / WhatsApp+8618159889985
KUKA / KCP2 / KR C2

KCP2 and KR C2 System Directory

Teach-pendant, controller-interface, power and safety-system references for configuration review.

KCP and controller references

KCP2 00-130-547Target KCP2 robot teach pendant
KR C2 edition2005Documented KUKA robot controller family
MFC3Controller-board reference
CI3Controller interface-board reference
DSE-IBS-C33Controller interface-board reference

Power and safety references

Additional KUKA system references

PH1003-2840KUKA power-supply reference
KSD1-16KUKA servo-drive reference
00-111-847KUKA power-supply reference; verify exact execution
Exact-match links open existing Nordwel product pages. Unlinked entries remain reference-only until a matching full-model page is published.
KUKA / SYSTEM COMPONENTS

Pendant, Interface and Controller Review

Confirm every component against the installed KR C2 controller, robot archive and approved safety configuration.

TARGET TEACH PENDANT
KCP2 00-130-547

Confirm the complete pendant nameplate and controller execution.

ROBOT CONTROLLER FAMILY
KR C2 edition2005

Official controller family documented with a KCP hand programming unit.

CONTROLLER INTERFACE
MFC2 MFC2-IC3

Confirm the exact interface-board revision and installed role.

CONTROLLER BOARD
MFC3

Confirm the exact board revision and controller compatibility.

INTERFACE BOARD
CI3

Confirm the installed KUKA controller interface.

INTERFACE BOARD
DSE-IBS-C33

Confirm the exact part number and controller configuration.

POWER SUPPLY
00-205-143

Confirm electrical and controller compatibility from the nameplate.

POWER SUPPLY
KPS-600/20-ESC

Confirm the complete KR C2 power-supply execution.

SAFETY SYSTEM
ESC-PLATINE

Confirm the installed safety architecture and approved documentation.

These references are not automatic substitutes for KCP2 00-130-547. Confirm the complete model and installed system.
KCP2 / KR C2 edition2005 application review

KCP2 00-130-547 Applications

Application contexts based on the documented KCP hand-programming-unit role; final suitability depends on the exact pendant, controller and approved robot-cell documentation.

Application contexts

Robot programming interfaceUse only where the approved KUKA system documentation specifies the matching KCP hand programming unit.
Manual setup and controlled joggingConfirm the complete pendant, controller and safety configuration before operator use.
Robot-cell service and recoveryFollow KUKA and site procedures for controlled isolation, connection and functional checks.
Configuration-controlled spareRetain 00-130-547, the nameplate and controller context in procurement and maintenance records.

Why choose Nordwel

Exact-model controlKeep KCP2 00-130-547 intact in every quotation and receiving record.
Official-data boundarySeparate KUKA-documented system facts from site-specific engineering decisions.
Controller-context reviewCheck the pendant, connector, cable, controller generation and safety architecture together.
Dedicated contactStella coordinates pre-order clarification and quotation follow-up.
Confirm the complete model, nameplate, installed configuration and manufacturer documentation before ordering. Related KUKA controller components are not direct substitutes for KCP2 00-130-547.
Stella · sales@askplc.com · +8618159889985CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
These industrial spare references are not direct substitutes for KCP2 00-130-547. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp