Siemens identifies 6ES7954-8LC04-0AA0 as a SIMATIC memory card for S7-1x00 CPUs and SINAMICS, using 3.3 V Flash memory with a 4 MB capacity.
Brand:
SIEMENSItem NO.:
VE4005S2B5Goods Stock:
1Part Number:
VE4005S2B5Description:
Emerson lists VE4005S2B5 as a 16-channel 4–20 mA analog output module with HART support in the Series 2 Plus family.Siemens lists article number 6ES7954-8LC04-0AA0 as a SIMATIC S7 memory card for S7-1x00 CPU and SINAMICS applications, with 3.3 V Flash memory and 4 MB capacity.
| Manufacturer | Siemens |
|---|---|
| Article number | 6ES7954-8LC04-0AA0 |
| Product family | SIMATIC S7 Memory Cards |
| Product type | SIMATIC Memory Card |
| Capacity | 4 MB |
| Memory technology | 3.3 V Flash |
| Documented systems | S7-1x00 CPU / SINAMICS |
| Memory behavior | Non-volatile |
| Data role | User data, user program and CPU configuration |
| Net weight | 0.018 kg |
| Lifecycle | PM300: Active Product |
Source: Siemens Industry Mall product record and Siemens SIMATIC ST 70 catalog.
Verify the host equipment and protect the approved project data before the card is removed, inserted or commissioned.
Match the complete designation to the installed hardware, firmware and approved project configuration.
Official SIMATIC memory-card capacity variants; verify CPU or drive compatibility and the complete article number.
Higher-capacity SIMATIC memory-card variants, including a KinPlus version; they are not automatic substitutes for the target card.
A KinPlus memory-card variant and S7-1200 CPU references; confirm installed hardware, firmware and approved configuration.
SIMATIC connector and simulator references for separate system requirements; confirm their role in the installed assembly.
ABB controller and S800 I/O references from the supplied inventory; confirm each complete code and revision.
Bently Nevada 3500 monitoring-system references; confirm rack position, module revision and system configuration.
Emerson control-system module references; verify the full assembly number and installed DeltaV configuration.
Siemens interface, industrial Ethernet and HMI references; confirm the full order number and system version.
Allen-Bradley control and protection references; verify series, revision and application.
GE industrial control spare references; confirm manufacturer nameplate, board revision and host equipment.
Honeywell industrial-control references; verify the precise product family, revision and installed-system role.
Safety-system spare references; confirm the exact manufacturer, complete model and certified system configuration.
Published Nordwel references for separate industrial control and monitoring requirements.
AC 800M processor-unit reference for separate control-system requirements.
Published Nordwel reference3500 machinery-monitoring tachometer I/O module reference.
Published Nordwel referenceDeltaV dry-contact input card reference for separate DCS projects.
Published Nordwel referenceSIMATIC ET 200M interface-module reference for distributed I/O projects.
Published Nordwel referenceCompactLogix controller reference for separate automation-system projects.
Published Nordwel referenceHoneywell controller IOTA reference for separate control-system requirements.
Published Nordwel referenceUse the complete Siemens article number, not only the 6ES7954 family designation.
Siemens identifies it as a SIMATIC memory card for S7-1x00 CPUs and SINAMICS.
The official product record specifies 4 MB.
The Siemens description specifies 3.3 V Flash memory.
Siemens documentation describes non-volatile storage for user data, the user program and CPU configuration.
No automatic substitution is stated here. Confirm host hardware, firmware, capacity and manufacturer documentation.
Provide the host equipment, project backup status, approved card-handling procedure and required commissioning record.
Send the complete model, quantity, destination, nameplate details, host CPU or drive and required schedule to Stella.
Official capacity and KinPlus variants; confirm exact host system and complete order number.
Record host-system and data-management facts needed for a controlled quotation.
Retain every character and suffix.
Confirm the approved project capacity.
Match the manufacturer description.
Provide the exact CPU and firmware.
Provide the exact drive and documented card role.
Protect user data and configuration.
Check the current Industry Mall status.
Use current official product data.
Confirm model, nameplate and manufacturer documentation.
Thirty independent inventory references for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
