Manufacturer documentation identifies Model 2201 as the Trident Communication Baseplate used with Model 3201 Communication Modules.
Brand:
TriconexItem NO.:
CM2201Goods Stock:
1Part Number:
CM2201 7400206-100Description:
Triconex Trident Communication Module Baseplate. Model and installed configuration must be confirmed before ordering.Triconex manufacturer documentation identifies Model 2201 as the Trident Communication Baseplate used with Model 3201 Communication Modules.
| Manufacturer | Triconex |
|---|---|
| Complete model | CM2201 7400206-100 |
| Product family | Trident |
| Product type | Communication Module Baseplate |
| Supported module | Model 3201 Communication Module |
| CM capacity | Up to two CMs on one CM Baseplate |
| Installation | Above or below MP Baseplate; two MP Interconnect Assemblies |
| Dimensions | 25.2x23x4.2cm |
| Weight | 1.35kg |
Source: Triconex Trident Planning and Installation Guide - archived manufacturer PDF.
Verify the installed chassis layout, mounting and environmental conditions before removal or installation.
Match the complete designation to the Trident controller, modules, baseplates and communication media.
Communication Module installed on the Trident CM Baseplate
CM2201Communication Baseplate model identified in the Trident manual
MP BaseplateAdjacent baseplate connection point for the CM Baseplate
Two assemblies are required for CM Baseplate installation
3503ETricon digital input module reference
3604ETricon digital output module reference
Tricon analog input module reference
3703ETricon analog input module reference
3708ETricon thermocouple input module reference
Tricon analog output module reference
3008Tricon main processor module reference
8312Tricon system power module reference
Controller unit
PSM0004 2RCA025059A0001RPower supply module
CI840A 3BSE041882R1Communication interface
3300 XL proximity probe
330905-00-18-05-02-053300 NSv proximity probe
330105-02-12-15-02-053300 XL proximity probe
Industrial Ethernet switch
6ES7153-2BA02-0XB0Distributed I/O interface module
6ES7214-1AD22-0XB0Programmable controller
Redundant I/O adapter
1768-L43CompactLogix controller
1756-ENBTEtherNet/IP communication module
Industrial control component
CRS-10-MBControl system module
IC693MDL753EDigital output module
Burner control relay module
C7232B5820Carbon dioxide sensor
T7412B1008Temperature controller
Trusted system module
T8123 PoE-30WPower over Ethernet module
3503EDigital input module
DeltaV serial interface card
KJ3224X1-BA2 13P0137X022DeltaV thermocouple/mV input card
KJ2005X1-SQ1 12P6383X052DeltaV system power/controller component
Six configuration-focused references for pre-order verification.
Communication Module Baseplate
TARGET MODELCommunication Module for the CM Baseplate
SYSTEM MATCHAdjacent baseplate connection reference
INSTALLATION CHECKRequired interconnect hardware; two assemblies specified
ACCESSORY CHECKManufacturer documentation identifies Model 2201 as the Trident Communication Baseplate.
It is part of the complete ordering identification and must be confirmed on the nameplate.
The Trident manual identifies Model 3201 as the Communication Module.
The manual states that one Trident controller supports up to two CMs on one CM Baseplate.
It installs directly above or below the MP Baseplate.
The manual specifies two MP Interconnect Assemblies.
No. Confirm the installed CM configuration, media and project documentation.
No. Confirm complete model, part number, revision and installed-system compatibility.
Send clear nameplate photos, controller and chassis layout, CM module details, interfaces and project documentation.
Stella coordinates model verification, compatibility review, quotation and documentation confirmation.
Communication, baseplate, processor, I/O and power references for system review.
Confirm each item against the installed Trident configuration and manufacturer documentation.
Two assemblies specified for CM Baseplate installation
Confirm direct above/below installation relationship
Confirm quantity, revision and installed configuration
Confirm RS-232 or RS-485 connection requirements
Confirm Net1 Ethernet media and connectors
Confirm 10 Mbps AUI installation requirements
Confirm Net2 Ethernet media and connectors
Confirm required MII interface hardware
Confirm drawings, BOM and environmental conditions
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
