other
Products
ABB PM5670-2ETH
ABB PM5670-2ETH
ABB PM5670-2ETH

ABB PM5670-2ETH AC500 V3 Processor Module

EMAIL SALES
ABB official data verified
PM5670-2ETH — Processor module

High-performance PM56xx processor class. Match the full processor revision, firmware and terminal base; do not select by enclosure appearance.

AC500 V3Processor module24 V DCPM5670-2ETH
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially verified product profile
Product familyAC500 V3
Exact modelPM5670-2ETH
Module typeProcessor module
Electrical profile24 V DC
Verified featureTwo independent onboard Ethernet interfaces
Selection boundaryConfirm complete ABB revision
Interface / order detailRS-232/485, display and memory-card slot
Engineering applicationHigh-performance machine control
  • Brand:

    ABB
  • Item NO.:

    PM5670-2ETH
  • Goods Stock:

    1
  • Part Number:

    PM5670-2ETH
  • Description:

    Processor module for AC500 V3
PM5670-2ETH configuration inquiry

Get a precise quote for PM5670-2ETH

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

PM5670-2ETH official identification

ABB identifies PM5670-2ETH as a Processor module in the AC500 V3 family. High-performance PM56xx processor class.

Complete modelPM5670-2ETH
Documented platformAC500 V3
Verified functionTwo independent onboard Ethernet interfaces
Interface or ordering factRS-232/485, display and memory-card slot

Engineering and installation checks

  • Match the full processor revision, firmware and terminal base; do not select by enclosure appearance.
  • Confirm the installed terminal base or terminal blocks, field wiring, firmware and hardware index before replacement.
  • Manufacturer verification basis: ABB PM56xx ordering data and AC500 V3 hardware manual.
Official product data

PM5670-2ETH key specifications

Product familyAC500 V3
Program/data memory160 MB
Minimum instruction time0.002 / 0.002 / 0.002 µs (bit/word/floating point)
Ethernet interfaces2
Serial interface1 × RS-232/RS-485
CAN interface1
Supply voltage24 V DC
Order code1SAP151000R0278

Source: ABB AC500 V3 CPU ordering data and hardware manual.

Pre-order check 01

Installation environment

Verify the processor base, supply and all connected networks before the CPU is replaced.

  • De-energize the CPU assembly before removing the processor or terminal base.
  • Verify 24 V DC supply, grounding and the complete terminal-base type.
  • Record both Ethernet networks, serial settings, CAN settings and connected modules.
  • Restore the approved project only with a compatible AC500 V3 firmware and engineering version.
Record the complete hardware revision, firmware and restored project version before commissioning.
Pre-order check 02

Compatibility confirmation

Match processor performance, interfaces, terminal base and engineering project to the installed system.

CPU performance
160 MB memory and the documented instruction-time class
Ethernet design
Two independent onboard Ethernet interfaces
Serial/CAN
Required RS-232/RS-485 and CAN configuration
System hardware
Terminal base, communication modules and local I/O
Replacement check
Match model, order-code revision, firmware and project
Final selection: confirm every row against the complete model, installed assembly and approved project documentation.
Recommended model families

More ABB models

ABB VERIFIED MODELS 01ABB DSTA002B / 3BSE018317R1ABB 3BHE037864R0104 UFC911 B104ABB RB4C-355/170 3AXD50000006934

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB VERIFIED MODELS 02ABB 086364-001ABB ACS880-04-330A-7ABB NTR012-A

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB VERIFIED MODELS 03ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB VERIFIED MODELS 04ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

TIFFANY VERIFIED MODELS 01Bently Nevada 330730-040-01-05Bently Nevada 144181-51-05Bently Nevada 102045-040-01-05

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 02Bently Nevada 146054-34-20-02-05GE DS200TCQAG1BFDSchneider PN072132P902 / 3D658187G901

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 03Schneider BMXDDO1602Schneider BMENOC0301GE SST-PFB3-VME2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 04Woodhead SST-DNP-PCI-4SST SST-PB3-SLCVibro-Meter AF70982 / 111-412-000-012

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 05Vibro-Meter S3960 AC46286 / 144-201-000-222VIPA 315-2AG12 / CPU315SB DPMWestinghouse 5X00241G02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 06Westinghouse 5X00058G01Westinghouse 5X00226G01Bently Nevada 200152-XX-XX-XX MOD 323357-10-03-10

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 07Bently Nevada 86691-02150-0400-15-05Bently Nevada 330171-00-12-05-01-05Bently Nevada 330171-00-33-50-01-05

Each target page displays Tiffany Guan and sales2@mooreplc.com.

TIFFANY VERIFIED MODELS 08Bently Nevada 3500/50EBently Nevada 330180-91-00Bently Nevada 330180-51-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel product page. Confirm the complete model before ordering.CHECK WITH SALES

PM5670-2ETH Order Guide

Use the complete ABB model and the installed hardware record for engineering review.
1Exact identityPM5670-2ETH must be retained without shortening.
2PlatformAC500 V3 / Processor module
3Electrical check24 V DC
4Documented featureTwo independent onboard Ethernet interfaces
5Connection checkRS-232/485, display and memory-card slot
6Official sourceABB PM56xx ordering data and AC500 V3 hardware manual

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
BENTLY NEVADA / PROXIMITY SENSOR330180-91-00

Proximity-sensor reference for installed monitoring systems.

Tiffany-verified target
BENTLY NEVADA / EXPANSION MODULE128276-01E

Expansion-module reference for system configuration review.

Tiffany-verified target
ABB / ANALOG INPUTRAI02J

Analog-input reference for control-system replacement review.

Tiffany-verified target
GE / ANALOG I/ODS200TCQAG1BFD

Analog I/O card reference for installed-system support.

Tiffany-verified target
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Model verificationCompare the complete ABB code and installed nameplate.
Compatibility reviewCheck platform, connection hardware, power, firmware and application context.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation boundaryUse only manufacturer-published facts; undocumented values are not inferred.

PM5670-2ETH FAQ

In what way should engineers identify PM5670-2ETH before approving a replacement?

Match the complete ABB type designation, installed hardware index, terminal arrangement and project documentation. Do not approve a replacement from appearance or a shortened family number.

Which official electrical value controls the initial wiring review for PM5670-2ETH?

The documented supply or output profile is 24 V DC. Confirm the actual cabinet supply, protective devices and field wiring against the ABB manual before energizing.

Which compatibility evidence is needed for PM5670-2ETH in an existing AC500 installation?

Verify the CPU or I/O family, terminal base or terminal block, device index, firmware, engineering project and every connected communication or I/O module.

Can PM5670-2ETH be installed without checking separately ordered connection hardware?

No. Confirm the ABB-specified terminal base or terminal blocks and ensure the installed connector set matches this exact module.

Which commissioning record should be retained for PM5670-2ETH?

Record the full nameplate, hardware index, firmware where applicable, wiring checks, configured addresses, diagnostics and functional-test results.

Does the family description alone prove that PM5670-2ETH fits the application?

No. Family data explains the platform, but the exact model, revision, wiring and environmental requirements control selection.

Which diagnostic checks are appropriate after installing PM5670-2ETH?

Check supply and status LEDs, controller diagnostics, configured channel states, network status where applicable and the intended field-device response before handover.

Which must be reviewed before using PM5670-2ETH as a maintenance spare?

Compare the complete order code, lifecycle status, installed accessories, software level, field wiring and approved machine or safety documentation.

In what way should environmental suitability be confirmed for PM5670-2ETH?

Use the ABB hardware manual for mounting orientation, temperature, humidity, altitude, enclosure and derating limits; do not infer XC performance for a standard module.

Which information should accompany a Nordwel quotation request for PM5670-2ETH?

Send the full model, quantity, destination, a clear nameplate photo and the installed CPU/I/O or safety-system context so Tiffany can perform a configuration-aware check.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
AC500 V3 application review

PM5670-2ETH Applications

Typical inquiry contexts based on the documented module function; final suitability depends on the installed system.

Application contexts

01 · High-performance machine controlUse PM5670-2ETH only where the ABB-documented platform, wiring and environmental limits match the project.
02 · Large Ethernet automation cellsUse PM5670-2ETH only where the ABB-documented platform, wiring and environmental limits match the project.
03 · Protocol-intensive projectsUse PM5670-2ETH only where the ABB-documented platform, wiring and environmental limits match the project.
04 · Advanced AC500 migrationUse PM5670-2ETH only where the ABB-documented platform, wiring and environmental limits match the project.

Why choose Nordwel

Exact-model controlKeep the complete ABB designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose drawings, approved parts list or migration study name PM5670-2ETH. Check first: exact revision, connection hardware, firmware, supply, wiring and environmental requirements.
Need help matching your ABB configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens SIMATIC S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp