Rockwell Automation identifies 1794-OE4XT as a FLEX I/O-XT four-point analog output module for current or voltage outputs.
Brand:
PLCItem NO.:
1794-OE4XTGoods Stock:
1Part Number:
1794-OE4XTPlace of Origin:
SingaporeDescription:
Rockwell Automation lists 1794-OE4XT as a Flex XT 4 Point Analog Output Module in the Allen-Bradley FLEX I/O-XT family.Rockwell Automation lists 1794-OE4XT as a Flex XT 4 Point Analog Output Module in the Allen-Bradley FLEX I/O-XT family. The official product page shows Series B and End of Life lifecycle status.
| Output channels | 4 single-ended, non-isolated outputs |
|---|---|
| Nominal ranges | +/-10 V and 0...20 mA |
| Operating temperature | -20 to 70 C |
| Country of origin | USA |
| Lifecycle status | End of Life |
| Warranty | With 1 year warranty |
Source: Rockwell Automation 1794-OE4XT product page, 1794-UM062 user manual and 1794-IN125 installation instructions. Warranty is the Nordwel commercial warranty.
Record the installed FLEX I/O-XT arrangement before removing or powering down the module.
Match the physical base, wiring and installed FLEX system before approving the module or a migration path.
FLEX I/O 4-point analog output module
1794-IE8XTFLEX I/O-XT 8-point analog input module
1794-IE4XOE2XTFLEX I/O-XT combination analog I/O module
FLEX I/O 8-point analog input module
1794-IB8FLEX I/O 8-point digital input module
1794-VHSCFLEX I/O very high-speed counter module
FLEX I/O DeviceNet adapter
1794-TB3GSFLEX I/O terminal base unit
1794-TB3FLEX I/O terminal base unit
FLEX I/O spring-clamp terminal base unit
1794-TBNFLEX I/O terminal base unit
5094-OF8XTRockwell-listed functional replacement; migration review required
AC 800M controller reference
ABB PSM0004 2RCA025059A0001Rpower-supply module reference
ABB 1SAP176000R0080 CM5640-2ETHEthernet communication module reference
tachometer-module reference
3500/53 133396-01overspeed-detection system reference
3500/32M 149986-02NCrelay-module reference
DeltaV I/O card reference
KJ4110X1-BA1 12P1867X012DeltaV system card reference
12P2533X042 KJ3222X1-EA1DeltaV I/O card reference
redundancy-module reference
6SL3040-1MA01-0AA0drive control-unit reference
6GK5208-0BA00-2AB2 XB208industrial Ethernet switch reference
industrial control component reference
1768-PA3 B01 PN:97323572CompactLogix power-supply reference
1746-NI4SLC analog input module reference
GE control-board reference
GE CRS-10-MBGE communication component reference
IC693ALG442-EBSeries 90-30 analog I/O module reference
remote I/O reference
PAIH03 51304754-150analog input module reference
51308307-175 / CC-TCNT01controller module reference
Trusted expander-interface reference
T8311 PN:5020-101Trusted expander-interface reference
S4000CH 32425-14safety-system component reference
Allen-Bradley FLEX I/O modules, adapters and terminal-base references for configuration review.
FLEX I/O very high-speed counter module.
Published Nordwel pageFLEX I/O DeviceNet adapter for system configuration review.
Published Nordwel pageFLEX I/O terminal base unit; confirm module compatibility.
Published Nordwel pageFour-point FLEX I/O analog output module reference; not a direct substitute for 1794-OE4XT.
Reference onlyMatch the complete catalog number and series letter on the product label.
Rockwell Automation identifies it in the Allen-Bradley FLEX I/O-XT family.
It is a four-point analog output module.
The official manual lists nominal +/-10 V and 0...20 mA output ranges.
1794-IN125 lists 1794-TB2, 1794-TB3, 1794-TB3S, 1794-TB3T, 1794-TB3TS and 1794-TBN.
No. Catalog number, base, signal range, wiring and controller configuration require review.
Rockwell Automation lists 5094-OF8XT; migration still requires complete engineering review.
Confirm cabinet conditions against the official -20 to 70 C product rating and applicable approvals.
Provide 1794-OE4XT, series, quantity, destination, nameplate image, base number and wiring record.
Use Rockwell Automation literature and approved installed-system documentation for final decisions.
Published and official family references for module, adapter and terminal-base review.
Terminal-base, signal and migration items to record before ordering 1794-OE4XT.
Compatible base listed in 1794-IN125.
Compatible base listed in 1794-IN125.
Compatible spring-clamp base listed in 1794-IN125.
Compatible base listed in 1794-IN125.
Compatible base listed in 1794-IN125.
Compatible base listed in 1794-IN125.
Confirm voltage-channel wiring and scaling.
Confirm current-channel wiring and load.
Rockwell-listed functional replacement; migration review required.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
