A case-mounted velocity transducer configuration with an M6 plate-stud assembly, MIL-C-5015 connection interface and no agency-approval option.
Brand:
Bently NevadaItem NO.:
190501-10-00-00Goods Stock:
1Part Number:
190501-10-00-00Description:
A case-mounted velocity transducer configuration with an M6 plate-stud assembly, MIL-C-5015 connection interface and no agency-approval option.A case-mounted velocity transducer configuration with an M6 plate-stud assembly, MIL-C-5015 connection interface and no agency-approval option.
| Mounting option | Plate stud M6x1 to M6x1 with 3/8-24 adapter |
|---|---|
| Connection option | MIL-C-5015 |
| Approval option | No approvals |
| Sensitivity | 3.94 mV/mm/s (100 mV/in/s) ±5% |
| Frequency response | 3.0–900 Hz ±1.0 dB; 1.5 Hz–1.0 kHz ±3.0 dB |
| Velocity range | 63.5 mm/s pk (2.5 in/s pk) |
| Operating temperature | -40°C to +85°C |
Source: 190501 Velomitor CT Transducer Datasheet 141636 Rev. AF.
Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.
Match the complete designation to the installed mechanical arrangement, connection and measurement chain.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Output-module reference for control-system projects.
Tiffany-verified targetEthernet-module reference for network compatibility review.
Tiffany-verified targetProximity-sensor reference for machinery applications.
Tiffany-verified targetAccelerometer reference for vibration-monitoring projects.
Tiffany-verified targetProcessor-module reference for installed control systems.
Tiffany-verified targetAnalog-input board reference for replacement review.
Tiffany-verified targetMatch the complete designation 190501-10-00-00, the installed nameplate, mechanical arrangement and signal-chain record. A base family match alone is not sufficient.
190501-10-00-00 is reviewed here under 190501 Velomitor CT. Confirm the exact suffixes and any project-specific drawing before release.
Verify measurement as Case velocity, then compare every remaining ordering option with the installed assembly.
Confirm the M6 plate-stud stack and seating surface. Keep the removal measurements and final inspection record with the maintenance package.
The reviewed interface is MIL-C-5015 connection interface. Confirm the mating hardware, cable route, shielding and connector condition before energizing.
Not automatically. Nearby variants can differ in length, mounting, armor, connector or approval. Use the exact code and verify the complete system.
Use only the limits stated for 190501 Velomitor CT in the manufacturer document, then confirm the actual temperature, moisture, hazardous-area and mechanical conditions at the site.
Keep the nameplate, installed dimensions, cable and connector checks, initial gap or baseline signal where applicable, diagnostics and controlled functional-test results.
Provide 190501-10-00-00, quantity, destination, clear nameplate images, installed-system context, mating parts and required schedule. Tiffany Guan can coordinate the exact-order review.
Only values traceable to 190501 Velomitor CT Transducer Datasheet 141636 Rev. AF are used. Site-specific suitability still requires the approved project documentation and installed configuration.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
