Item NO.:
330101-35-62-10-01-0Part Number:
330101-35-62-10-01-05Weight:
0.08kgDimensions:
1.5x1.3x109cmManufacture Year:
The lastest yearPlace of Origin:
USACertification:
COODescription:
3300 XL 8 mm Proximity Probes
Product Information
|
Model Number: |
330101-35-62-10-01-05 |
|
Description: |
3300 XL 8 mm Proximity Probes |
|
Condition: |
100% Original |
|
manufacturer: |
Bently Nevada |
Sales Manager:
Stella
Send an email:
Contact in Whatsapp:
Installation & Troubleshooting FAQ
Q1: What is the correct installation method for Bently Nevada 330101-35-62-10-01-05 proximity probe?
A1: Install the 330101-35-62-10-01-05 as part of a complete 3300 XL 8 mm proximity measurement system, ensuring it is matched with its corresponding extension cable and Proximitor sensor. The probe should be mounted rigidly in the machine housing with the sensing tip positioned toward the rotating shaft. During installation, set the air gap within the machine’s calibrated range and avoid mechanical stress on the probe body or cable entry point.
Q2: Why is there no stable DC output after wiring is completed?
A2: A missing or unstable output usually indicates incorrect wiring between the probe, extension cable, and Proximitor sensor. Verify that connectors are fully seated and that shielding is properly grounded. If the probe is installed too far from the target surface, the eddy current field may be too weak to generate a stable voltage signal.
Q3: What causes fluctuating vibration readings during operation?
A3: Fluctuations are often caused by mechanical issues rather than sensor malfunction. Check for shaft misalignment, loosened probe brackets, or casing vibration influencing the probe itself. Thermal expansion of the machine structure can also shift probe clearance slightly, leading to unstable amplitude trends.
Q4: Why does the system show intermittent signal loss or dropouts?
A4: Intermittent loss is commonly related to cable integrity or connector reliability. Inspect the extension cable for bending damage, insulation wear, or intermittent contact at plug interfaces. Electrical noise from nearby power drives or poor grounding can also interrupt stable signal transmission.
Q5: How should Keyphasor or speed signal issues be diagnosed?
A5: Confirm that the probe is correctly aligned with the reference notch or keyway on the shaft. Incorrect angular positioning or inconsistent gap distance can prevent reliable pulse generation. Also verify that the Proximitor sensor scaling settings match the monitoring system configuration.
At Amikon Limited, we provide a wide range of industrial automation products and solutions to support modern manufacturing and process industries worldwide. Our product portfolio includes:
•PLC systems, HMIs, sensors, servo drives, motors, and frequency inverters
•Distributed control systems (DCS), PLC, and CNC solutions
•Industrial panel controllers and touchscreen interfaces
•Human-machine interface (HMI) display panels
•Motion control and industrial drive systems
•Encoders and signal conversion devices
•Reliable industrial power supply solutions
We are dedicated to supplying only genuine and brand-new industrial automation components. Every product undergoes strict verification and testing procedures to ensure stable performance, reliability, and long service life.
With a large and diverse stock of automation parts, we can quickly meet urgent customer demands. Our efficient supply chain helps reduce downtime and keeps your operations running smoothly.
Customer satisfaction is at the center of our business. We focus on understanding each client’s requirements and delivering customized solutions backed by responsive technical and sales support.
We believe in building sustainable partnerships. By collaborating closely with customers and suppliers, we continuously seek better solutions that improve productivity and create long-term value.
With more than 10 years of experience in the industrial automation industry, Amikon Limited has established a strong global supply network covering Europe, the Americas, and Asia. We integrate resources from over 60,000 internationally recognized enterprises across 166 countries.
As a trusted supplier of difficult-to-find and obsolete automation components, we provide one-stop procurement solutions for customers around the world.
· Extensive stock of rare and discontinued industrial automation parts
· Cooperation with over 100 experienced manufacturers and equipment suppliers
· More than 2,000,000 automation parts delivered globally
Amikon Limited is committed to becoming a reliable force behind the advancement of industrial automation. Through efficiency, rapid service, and professional support, we help manufacturers worldwide achieve smarter, safer, and more efficient operations.
|
KJ2002X1-CA1 12P1509X102 |
KJ2002X1-CA1 12P1509X102 VE3004 |
KJ2003X1-BA2 12P2093X102 VE3005 |
KJ2003X1-BB1 12P3439X012 |
|
KJ2003X1-BB1 12P3439X012 VE3006 |
KJ2003X1-BB1 12P3439X012 VE3006 |
KJ2003X1-BB1 12P3439X022 VE3006 |
KJ2003X1-BB1 12P3439X032 VE3006 |
|
KJ2003X1-BK1 12P4686X052 |
KJ2201X1-BA1 12P3162X092 SLS1508 VS3202 |
HIEE450964R0001 SA9923A-E |
HIEE451116R0001 FM9925A-E |
|
HIER460302R0001 HIER460302R1 UN0824B-P |
HIET404238R0001 UFB700 A01 |
HIET404828R0001 PPB624 A01 |
HIET404828R0001 PPB624 A01 |
|
HITE303018R1 IDB550A |
HITE303166R1 HITE515100 IDB761A |
HITE303278R1 |
HITR301463R1 UA9810 |
|
81000-199-52-R |
81000-199-53-R |
81000-199-53-R |
81001-450-52-R GU-D08 80173-109-01 |
|
81001-451-62-R GU-D15 80173-110-02 G651885C |
81001-451-83-R GU-D15 80173-110-02 |
81001-956-53-R |
81003-438-51-R |
|
81004-286-53-R GU-G04 GCU04AB-130 80173-111-01-2 |
81007-465-51-R |
3500/50M 286566-02 288062-02 |
3500/53 133388-01 |
|
3500/53 133388-01 |
3500/54M 286566-01 |
3500/60 |
3500/60 133811-01 |
|
3500/60 163179-01 |
3500/60 163179-01 |
3500/60 163179-01 |
3500/60 163179-01 |
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
