Item NO.:
330104-04-10-50-02-0Part Number:
330104-04-10-50-02-05Weight:
0.1kgDimensions:
1.8x1.5x68cmManufacture Year:
The lastest yearPlace of Origin:
USACertification:
COODescription:
3300 XL 8 mm Proximity Probes
Product Information
|
Model Number: |
330104-04-10-50-02-05 |
|
Description: |
3300 XL 8 mm Proximity Probes |
|
Condition: |
100% Original |
|
manufacturer: |
Bently Nevada |
Sales Manager:
Stella
Send an email:
Contact in Whatsapp:
Installation & Troubleshooting FAQ
Q1: What should be confirmed before installing the Bently Nevada 330104-04-10-50-02-05 proximity probe?
A1: Before installation, verify that the 330104-04-10-50-02-05 is used as part of a complete 3300 XL 8 mm system including a compatible extension cable and Proximitor sensor. Check that the mounting location provides a stable mechanical reference and that the probe can be positioned perpendicular to the rotating shaft. Ensure there is enough physical clearance to achieve the required gap without mechanical interference during operation.
Q2: Why is the output voltage unstable or drifting after startup?
A2: Voltage drift is often related to improper mechanical setup or unstable probe positioning. Confirm that the probe is tightly secured and not affected by housing vibration or thermal expansion. If the probe gap is inconsistent, the eddy current field strength will fluctuate, causing unstable DC output levels.
Q3: What causes reduced sensitivity or weak vibration response?
A3: Reduced sensitivity usually indicates excessive probe-to-target distance or contamination on the shaft surface. Oil film buildup, dirt, or surface wear can weaken eddy current coupling. Recalibrate the probe gap and ensure the target surface is clean and electrically conductive for proper signal strength.
Q4: Why does the system show intermittent signal interruptions during operation?
A4: Intermittent signals are commonly caused by poor connector contact or damaged extension cables. Inspect all connections between probe, cable, and Proximitor sensor for looseness or corrosion. Cable routing too close to high-voltage equipment can also introduce noise or temporary signal dropouts.
Q5: How should Keyphasor or speed measurement errors be checked?
A5: Ensure the probe is aligned precisely with the shaft reference mark and that the passing target produces a consistent pulse. If timing signals are irregular, verify that the probe gap is within the proper range and that there is no mechanical wobble in the rotating element. System configuration parameters in the monitor should also match the installed probe type
At Amikon Limited, we provide a wide range of industrial automation products and solutions to support modern manufacturing and process industries worldwide. Our product portfolio includes:
•PLC systems, HMIs, sensors, servo drives, motors, and frequency inverters
•Distributed control systems (DCS), PLC, and CNC solutions
•Industrial panel controllers and touchscreen interfaces
•Human-machine interface (HMI) display panels
•Motion control and industrial drive systems
•Encoders and signal conversion devices
•Reliable industrial power supply solutions
We are dedicated to supplying only genuine and brand-new industrial automation components. Every product undergoes strict verification and testing procedures to ensure stable performance, reliability, and long service life.
With a large and diverse stock of automation parts, we can quickly meet urgent customer demands. Our efficient supply chain helps reduce downtime and keeps your operations running smoothly.
Customer satisfaction is at the center of our business. We focus on understanding each client’s requirements and delivering customized solutions backed by responsive technical and sales support.
We believe in building sustainable partnerships. By collaborating closely with customers and suppliers, we continuously seek better solutions that improve productivity and create long-term value.
With more than 10 years of experience in the industrial automation industry, Amikon Limited has established a strong global supply network covering Europe, the Americas, and Asia. We integrate resources from over 60,000 internationally recognized enterprises across 166 countries.
As a trusted supplier of difficult-to-find and obsolete automation components, we provide one-stop procurement solutions for customers around the world.
· Extensive stock of rare and discontinued industrial automation parts
· Cooperation with over 100 experienced manufacturers and equipment suppliers
· More than 2,000,000 automation parts delivered globally
Amikon Limited is committed to becoming a reliable force behind the advancement of industrial automation. Through efficiency, rapid service, and professional support, we help manufacturers worldwide achieve smarter, safer, and more efficient operations.
|
KJ2002X1-CA1 12P1509X102 |
KJ2002X1-CA1 12P1509X102 VE3004 |
KJ2003X1-BA2 12P2093X102 VE3005 |
KJ2003X1-BB1 12P3439X012 |
|
KJ2003X1-BB1 12P3439X012 VE3006 |
KJ2003X1-BB1 12P3439X012 VE3006 |
KJ2003X1-BB1 12P3439X022 VE3006 |
KJ2003X1-BB1 12P3439X032 VE3006 |
|
KJ2003X1-BK1 12P4686X052 |
KJ2201X1-BA1 12P3162X092 SLS1508 VS3202 |
HIEE450964R0001 SA9923A-E |
HIEE451116R0001 FM9925A-E |
|
HIER460302R0001 HIER460302R1 UN0824B-P |
HIET404238R0001 UFB700 A01 |
HIET404828R0001 PPB624 A01 |
HIET404828R0001 PPB624 A01 |
|
HITE303018R1 IDB550A |
HITE303166R1 HITE515100 IDB761A |
HITE303278R1 |
HITR301463R1 UA9810 |
|
81000-199-52-R |
81000-199-53-R |
81000-199-53-R |
81001-450-52-R GU-D08 80173-109-01 |
|
81001-451-62-R GU-D15 80173-110-02 G651885C |
81001-451-83-R GU-D15 80173-110-02 |
81001-956-53-R |
81003-438-51-R |
|
81004-286-53-R GU-G04 GCU04AB-130 80173-111-01-2 |
81007-465-51-R |
3500/50M 286566-02 288062-02 |
3500/53 133388-01 |
|
3500/53 133388-01 |
3500/54M 286566-01 |
3500/60 |
3500/60 133811-01 |
|
3500/60 163179-01 |
3500/60 163179-01 |
3500/60 163179-01 |
3500/60 163179-01 |
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
