other
Products
IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module
IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module
IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module

GE IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module

EMAIL SALES
GE official data reviewed
IC200ERM002C — VersaMax Non-Isolated Expansion Receiver Module

A non-isolated VersaMax expansion receiver for local multi-rack or single-ended expansion arrangements. The complete ordering identity is IC200ERM002C.

VersaMax expansion modulesNon-isolated expansion-rack receptionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyVersaMax expansion modules
Exact modelIC200ERM002C
Verified functionNon-isolated expansion-rack reception
Interface boundaryTwo 26-pin female D-shell expansion ports
Base catalog numberIC200ERM002
Selection basisConfirm revision, rack number and cable topology.
  • Brand:

    General Electric
  • Item NO.:

    IC200ERM002C
  • Goods Stock:

    1
  • Part Number:

    IC200ERM002C
  • Description:

    A non-isolated VersaMax expansion receiver for local multi-rack or single-ended expansion arrangements. The complete ordering identity is IC200ERM002C.
IC200ERM002C configuration inquiry

Get a precise quote for IC200ERM002C

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC200ERM002C official identification

A non-isolated VersaMax expansion receiver for local multi-rack or single-ended expansion arrangements. The complete ordering identity is IC200ERM002C.

Operating scopeNon-isolated expansion-rack reception
Mating arrangementTwo 26-pin female D-shell expansion ports
Host platformSlot 0 at the left end of the expansion rack
Field verificationcomplete receiver label, rack switch setting, cable map, port inspection, scan indicators and expansion-bus test; exact IC200ERM002C identity

Engineering and installation checks

  • The ordering and receiving identity is IC200ERM002C.
  • Record the rack number, cable order and upstream transmitter or receiver before removal. Record IC200ERM002C on the acceptance sheet.
  • The technical definition follows Emerson official VersaMax Modular I/O and Control data sheet.
Official product data

IC200ERM002C key specifications

Base catalog number IC200ERM002
Receiver type Non-isolated expansion receiver
Expansion ports Two 26-pin female D-shell
Maximum total cable length 15 metres in a non-isolated multi-rack system
Single-ended connection Up to 1 metre
Maximum expansion racks 7 with an expansion transmitter
Rack position Leftmost position, slot 0
Status indicators PWR, SCAN and EXP RX

Source: Emerson official VersaMax Modular I/O and Control data sheet.

Pre-order check 01

Installation environment

Prepare the versamax non-isolated expansion receiver module by recording its installed connections, settings and complete IC200ERM002C label.

  • Record the rack number, cable order and upstream transmitter or receiver before removal. Record IC200ERM002C on the acceptance sheet.
  • Install the receiver in slot 0 and set the expansion-rack selector to the documented value.
  • Connect the incoming cable to the upper port and the continuation or terminator to the lower port as designed.
  • Restore synchronized rack power and verify PWR, SCAN, EXP RX and every downstream I/O module.
Close the work with complete receiver label, rack switch setting, cable map, port inspection, scan indicators and expansion-bus test; exact IC200ERM002C identity.
Pre-order check 02

Compatibility confirmation

Approve IC200ERM002C only when the documented function and every listed interface boundary agree with the installed design.

Base function
IC200ERM002 non-isolated receiver
Rack position
Slot 0 at the left end of the expansion rack
Cable topology
Single-ended or transmitter-based expansion arrangement
Distance boundary
One metre single-ended; fifteen metres total with any non-isolated receiver
Revision identity
IC200ERM002C
Final selection: Use only the values published for IC200ERM002C in Emerson official VersaMax Modular I/O and Control data sheet; site suitability remains an engineering decision.
Recommended model families

More GE models

GE verified models 01GE IC200ALG264GGE IC200ALG264LGE IC200ALG265D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 02GE IC200ALG265GGE IC200ALG320FGE IC200ALG322G

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 03GE IC200ALG326KGE IC200ALG327GE IC200ALG328D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

GE verified models 04GE IC200ALG630-GDGE IC086SLN080-AGE IC200ALG230D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Siemens 6ES7521-7EH00-0AB0Siemens 6ES7414-3FM07-0AB0Siemens 6ES7416-3FS07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Siemens 6ES7654-7HB00-0XA0Siemens 6ES7654-7HC00-0XA0ABB AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB AO568ABB CD522ABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CI542-DPABB CI592-CS31ABB CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB CM598-CNABB DC562ABB DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB DO572ABB PM5032-R-ETHABB PM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB PM564-RP-ACYokogawa ATSA3S-0Yokogawa ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

IC200ERM002C Order Guide

Use the complete GE designation and installed hardware record for engineering review.
1Ordering identityIC200ERM002C
2Configuration captureRecord the rack number, cable order and upstream transmitter or receiver before removal. Record IC200ERM002C on the acceptance sheet.
3Mechanical fitInstall the receiver in slot 0 and set the expansion-rack selector to the documented value.
4Connection reviewConnect the incoming cable to the upper port and the continuation or terminator to the lower port as designed.
5Commissioning proofcomplete receiver label, rack switch setting, cable map, port inspection, scan indicators and expansion-bus test; exact IC200ERM002C identity
6Release decisionConfirm IC200ERM002C; confirm receiver revision, rack number, cable topology, total route length, upstream transmitter and power supply.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of IC200ERM002C.

Support scope

Receiver type reviewNon-isolated expansion receiver is checked against the received unit.
Rack position reviewSlot 0 at the left end of the expansion rack
Expansion ports checkpointTwo 26-pin female D-shell
Acceptance packagecomplete receiver label, rack switch setting, cable map, port inspection, scan indicators and expansion-bus test; exact IC200ERM002C identity

IC200ERM002C FAQ

How should a discrepancy in expansion ports be closed for IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

For IC200ERM002C, expansion ports as Two 26-pin female D-shell for its versamax non-isolated expansion receiver module function. For local expansion rack for ic200erm002c, record the rack number, cable order and upstream transmitter or receiver before removal. Record IC200ERM002C on the acceptance sheet. Check the mating device, protective hardware and configured function before energization.

What receiving evidence is required for the maximum expansion racks stated for IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

For this non-isolated expansion-rack reception selection, maximum expansion racks is 7 with an expansion transmitter. For multi-rack versamax station, install the receiver in slot 0 and set the expansion-rack selector to the documented value. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

How is base function separated from site-specific assumptions for IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

Use IC200ERM002 non-isolated receiver as the controlled base function value in the VersaMax expansion modules review. For fifteen-metre non-isolated expansion, connect the incoming cable to the upper port and the continuation or terminator to the lower port as designed. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

How should distance boundary be written in the purchase record for IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

Distance boundary is published as One metre single-ended; fifteen metres total with any non-isolated receiver for the VersaMax expansion modules. For expansion receiver replacement, restore synchronized rack power and verify PWR, SCAN, EXP RX and every downstream I/O module. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

What field observation validates receiver type for IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

For IC200ERM002C, receiver type as Non-isolated expansion receiver for its versamax non-isolated expansion receiver module function. For local expansion rack for ic200erm002c, record the rack number, cable order and upstream transmitter or receiver before removal. Record IC200ERM002C on the acceptance sheet. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

What fault could result from misreading single-ended connection on IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

For this non-isolated expansion-rack reception selection, single-ended connection is Up to 1 metre. For multi-rack versamax station, install the receiver in slot 0 and set the expansion-rack selector to the documented value. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What photograph or measurement proves status indicators on received IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

Use PWR, SCAN and EXP RX as the controlled status indicators value in the VersaMax expansion modules review. For fifteen-metre non-isolated expansion, connect the incoming cable to the upper port and the continuation or terminator to the lower port as designed. Release is appropriate only when the manufacturer value and the project requirement agree.

Which cable topology value identifies the reviewed IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module configuration?

Cable topology is published as Single-ended or transmitter-based expansion arrangement for the VersaMax expansion modules. For expansion receiver replacement, restore synchronized rack power and verify PWR, SCAN, EXP RX and every downstream I/O module. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Why does base catalog number matter when selecting IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

For IC200ERM002C, base catalog number as IC200ERM002 for its versamax non-isolated expansion receiver module function. For local expansion rack for ic200erm002c, record the rack number, cable order and upstream transmitter or receiver before removal. Record IC200ERM002C on the acceptance sheet. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

Which mismatch involving maximum total cable length should stop approval of IC200ERM002C VersaMax Non-Isolated Expansion Receiver Module?

For this non-isolated expansion-rack reception selection, maximum total cable length is 15 metres in a non-isolated multi-rack system. For multi-rack versamax station, install the receiver in slot 0 and set the expansion-rack selector to the documented value. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
VersaMax expansion modules application review

IC200ERM002C Applications

These contexts use IC200ERM002C for non-isolated expansion-rack reception, with project-specific connection and commissioning evidence.

Application contexts

01 · Local expansion rack for IC200ERM002CApply the documented non-isolated expansion-rack reception only after confirming base function as IC200ERM002 non-isolated receiver.
02 · Multi-rack VersaMax stationApply the documented non-isolated expansion-rack reception only after confirming rack position as Slot 0 at the left end of the expansion rack.
03 · Fifteen-metre non-isolated expansionApply the documented non-isolated expansion-rack reception only after confirming cable topology as Single-ended or transmitter-based expansion arrangement.
04 · Expansion receiver replacementApply the documented non-isolated expansion-rack reception only after confirming distance boundary as One metre single-ended; fifteen metres total with any non-isolated receiver.

Why choose Nordwel

Base catalog number traceabilityIC200ERM002C is reviewed against IC200ERM002.
Receiver type controlNon-isolated expansion receiver is checked independently.
Cable topology fitSingle-ended or transmitter-based expansion arrangement
Coordinated releaseTiffany manages quotation, receiving evidence and commissioning records for IC200ERM002C.
Keep ordering identity, system fit and final acceptance as separate decisions for IC200ERM002C.
Need Tiffany to verify the IC200ERM002C acceptance package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp