other
Products
CC-PSP401 Series C Speed Protection Module
CC-PSP401 Series C Speed Protection Module
CC-PSP401 Series C Speed Protection Module

Honeywell CC-PSP401 Series C Speed Protection Module

EMAIL SALES
Honeywell official data reviewed
CC-PSP401 — Series C Speed Protection Module

CC-PSP401 is a Series C turbomachinery speed-protection module built around four speed probes and two-out-of-three trip voting.

Series C Turbomachinery I/OTurbine overspeed detection and trip votingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerHoneywell
Documented familySeries C Turbomachinery I/O
Product formSeries C Speed Protection Module
Primary functionTurbine overspeed detection and trip voting
Speed inputs4
Trip voting2oo3
Digital inputs8
Analog outputs1
  • Brand:

    Honeywell
  • Item NO.:

    CC-PSP401
  • Goods Stock:

    1
  • Part Number:

    CC-PSP401
  • Description:

    CC-PSP401 is a Series C turbomachinery speed-protection module built around four speed probes and two-out-of-three trip voting.
CC-PSP401 configuration inquiry

Get a precise quote for CC-PSP401

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CC-PSP401 official identification

CC-PSP401 is a Series C turbomachinery speed-protection module built around four speed probes and two-out-of-three trip voting.

System roleTurbine overspeed detection and trip voting
Connection boundary4 speed inputs, 8 digital inputs, 4 digital outputs, 8 analog inputs and 1 analog output
Selection focusConfirm probe allocation, voting architecture, auxiliary channel count, redundancy requirement and scan-time boundary.
Release evidenceCC-PSP401 nameplate, probe map, voting proof test, auxiliary-channel check and trip timing record

Engineering and installation checks

  • undefined
  • Map every speed probe to its assigned input before moving field wiring.
  • Manufacturer verification basis: Honeywell Series C Turbomachinery I/O Specification, EP03-540-511.
Official product data

CC-PSP401 key specifications

Speed inputs 4
Trip voting 2oo3
Digital inputs 8
Digital outputs 4
Analog inputs 8
Analog outputs 1
Pulse processing 2.5 ms
Analog processing 10 ms
Loop latency Less than 40 ms
Redundancy Supported

Source: Honeywell Series C Turbomachinery I/O Specification, EP03-540-511.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CC-PSP401.

  • Map every speed probe to its assigned input before moving field wiring.
  • Keep the trip outputs separated from indication-only circuits in the termination record.
  • Configure the required redundant arrangement before loading protection logic.
  • Perform a controlled two-out-of-three trip proof test and capture the measured latency.
Record the as-found condition and the final cc-psp401 nameplate, probe map, voting proof test, auxiliary-channel check and trip timing record
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CC-PSP401 before purchase approval.

Probe population
Up to 4 speed inputs
Protection logic
2oo3 voting
Auxiliary monitoring
8 AI and 8 DI
Trip interface
4 DO plus 1 AO
Response boundary
Loop latency below 40 ms
Final selection: Use only the values published for CC-PSP401 in Honeywell Series C Turbomachinery I/O Specification, EP03-540-511; site suitability remains an engineering decision.
Recommended model families

More Honeywell models

Honeywell verified models 01Honeywell CC-TCNT03Honeywell CC-TCNT04Honeywell CC-PDOB51

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 02Honeywell CC-TCNT02Honeywell CC-TCF902Honeywell CC-TCF911

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 03Honeywell CC-TCF912Honeywell CC-GAIX21Honeywell CC-GDOL21

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Honeywell verified models 04Honeywell CC-TSP411 51306669-175Honeywell FC-TCNT11 51307928-176Honeywell 10014/I/F

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901Schneider BMXDDO1602

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Schneider BMENOC0301GE SST-PFB3-VME2Woodhead SST-DNP-PCI-4

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Vibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222Westinghouse 5X00241G02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Westinghouse 5X00058G01Westinghouse 5X00226G01AREVA MVAJ101RA0802A

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Bently Nevada 21505-00-28-05-02Pepperl+Fuchs RSD-GW3-Ex2.DPELoad Cell Central OM-19-2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Schneider AP4423ABB 086364-001ABB ACS880-04-330A-7

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CC-PSP401 Order Guide

Use the complete Honeywell designation and installed hardware record for engineering review.
1Ordering identityCC-PSP401
2Official evidenceHoneywell Series C Turbomachinery I/O Specification, EP03-540-511
3Installation surveyKeep the trip outputs separated from indication-only circuits in the termination record.
4Compatibility gateUp to 4 speed inputs
5Commissioning recordCC-PSP401 nameplate, probe map, voting proof test, auxiliary-channel check and trip timing record
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CC-PSP401 source record named on this page.
Interface review4 speed inputs, 8 digital inputs, 4 digital outputs, 8 analog inputs and 1 analog output
Receiving checkConfirm probe allocation, voting architecture, auxiliary channel count, redundancy requirement and scan-time boundary.
Release packageCC-PSP401 nameplate, probe map, voting proof test, auxiliary-channel check and trip timing record

CC-PSP401 FAQ

What commissioning check confirms the documented trip voting for CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

The official CC-PSP401 record gives trip voting as 2oo3 for its series c speed protection module function. For overspeed trip voting, map every speed probe to its assigned input before moving field wiring. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request. File this as overspeed trip-path proof testing checkpoint 1; do not reuse the result for another model or channel group.

At which review gate should CC-PSP401 Series C Speed Protection Module analog inputs be challenged in the overspeed trip-path proof testing record?

For this turbine overspeed detection and trip voting selection, analog inputs is 8. For turbine speed probe consolidation, keep the trip outputs separated from indication-only circuits in the termination record. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification. File this as overspeed trip-path proof testing checkpoint 2; do not reuse the result for another model or channel group.

Which drawing or schedule should carry the CC-PSP401 Series C Speed Protection Module analog processing record in the overspeed trip-path proof testing record?

Use 10 ms as the controlled analog processing value in the Series C Turbomachinery I/O review. For redundant protection modernization, configure the required redundant arrangement before loading protection logic. The commissioning sheet should name the instrument, method, acceptance limit and approving person. File this as overspeed trip-path proof testing checkpoint 3; do not reuse the result for another model or channel group.

Which companion item must agree with probe population for CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

Probe population is published as Up to 4 speed inputs for the Series C Turbomachinery I/O. For shutdown-path proof testing, perform a controlled two-out-of-three trip proof test and capture the measured latency. Use the value as a selection boundary, not as a prediction of site performance. File this as overspeed trip-path proof testing checkpoint 4; do not reuse the result for another model or channel group.

How should a discrepancy in trip interface be closed for CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

The official CC-PSP401 record gives trip interface as 4 DO plus 1 AO for its series c speed protection module function. For overspeed trip voting, map every speed probe to its assigned input before moving field wiring. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics. File this as overspeed trip-path proof testing checkpoint 5; do not reuse the result for another model or channel group.

What receiving evidence is required for the trip voting stated for CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

For this turbine overspeed detection and trip voting selection, trip voting is 2oo3. For turbine speed probe consolidation, keep the trip outputs separated from indication-only circuits in the termination record. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items. File this as overspeed trip-path proof testing checkpoint 6; do not reuse the result for another model or channel group.

How is analog inputs separated from site-specific assumptions for CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

Use 8 as the controlled analog inputs value in the Series C Turbomachinery I/O review. For redundant protection modernization, configure the required redundant arrangement before loading protection logic. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement. File this as overspeed trip-path proof testing checkpoint 7; do not reuse the result for another model or channel group.

How should analog processing be written in the purchase record for CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

Analog processing is published as 10 ms for the Series C Turbomachinery I/O. For shutdown-path proof testing, perform a controlled two-out-of-three trip proof test and capture the measured latency. Log the comparison against the controlled parts list before the item enters the cabinet. File this as overspeed trip-path proof testing checkpoint 8; do not reuse the result for another model or channel group.

What field observation validates probe population for CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

The official CC-PSP401 record gives probe population as Up to 4 speed inputs for its series c speed protection module function. For overspeed trip voting, map every speed probe to its assigned input before moving field wiring. Check the mating device, protective hardware and configured function before energization. File this as overspeed trip-path proof testing checkpoint 9; do not reuse the result for another model or channel group.

What fault could result from misreading trip interface on CC-PSP401 Series C Speed Protection Module in the overspeed trip-path proof testing record?

For this turbine overspeed detection and trip voting selection, trip interface is 4 DO plus 1 AO. For turbine speed probe consolidation, keep the trip outputs separated from indication-only circuits in the termination record. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published. File this as overspeed trip-path proof testing checkpoint 10; do not reuse the result for another model or channel group.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Series C Turbomachinery I/O application review

CC-PSP401 Applications

These contexts use the manufacturer-documented function of CC-PSP401; each requires a separate site-fit decision.

Application contexts

01 · Overspeed trip votingApply the documented turbine overspeed detection and trip voting only after confirming probe population as Up to 4 speed inputs.
02 · Turbine speed probe consolidationApply the documented turbine overspeed detection and trip voting only after confirming protection logic as 2oo3 voting.
03 · Redundant protection modernizationApply the documented turbine overspeed detection and trip voting only after confirming auxiliary monitoring as 8 AI and 8 DI.
04 · Shutdown-path proof testingApply the documented turbine overspeed detection and trip voting only after confirming trip interface as 4 DO plus 1 AO.

Why choose Nordwel

Traceable identityCC-PSP401 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to turbine overspeed detection and trip voting, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CC-PSP401, 4 speed inputs, 8 digital inputs, 4 digital outputs, 8 analog inputs and 1 analog output, and the approved site record as three independent checks.
Need help matching this Honeywell configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp