other
Products
TMG740-3 MOD 43-35 Burner Control Box
TMG740-3 MOD 43-35 Burner Control Box
TMG740-3 MOD 43-35 Burner Control Box

Honeywell Satronic TMG740-3 MOD 43-35 Burner Control Box

EMAIL SALES
Honeywell Satronic official data reviewed
TMG740-3 MOD 43-35 - Burner Control Box

Honeywell Satronic identifies TMG 740-3 as a burner control box family for medium- and high-performance forced-draught and dual-fuel oil/gas burners in intermittent operation.

TMG 740-3 burner control seriesMOD 43-35 program timingExact-order review
Sales contactStella
Tel / WhatsApp+8618159889985
Officially reviewed product profile
Product familyTMG 740-3
Exact modelTMG740-3 MOD 43-35
Product typeBurner Control Box
Supply voltage220 / 240 V AC (-15...+10%)
Flame detectionIonisation, UV or infrared
ProtectionIP44
Program versionMOD 43-35
Verified functionBurner control and flame supervision
  • Brand:

    Honeywell
  • Item NO.:

    TMG740-3 MOD 43-35
  • Goods Stock:

    1
  • Part Number:

    TMG740-3 MOD 43-35
  • Weight:

    Honeywell Satronic
  • Dimensions:

    TMG 740-3
  • Manufacture Year:

    Burner Control Box
  • Place of Origin:

    220 / 240 V AC (-15...+10%)
  • Certification:

    IP44
  • Description:

    Official source: https://products.ecc.emea.honeywell.com/europe-historic/2006_1/pdf/en-tmg740-3-sz20r1205.pdf
TMG740-3 MOD 43-35 configuration inquiry

Get a precise quote for TMG740-3 MOD 43-35

Email Sales
Sales contactStella
WhatsApp+8618159889985

TMG740-3 MOD 43-35 official identification

Honeywell Satronic identifies the TMG 740-3 family for medium- and high-performance forced-draught and dual-fuel oil/gas burners in intermittent operation. MOD 43-35 is the documented program version.

Complete modelTMG740-3 MOD 43-35
Documented familyHoneywell Satronic TMG 740-3
Verified functionBurner control and flame supervision
Interface or ordering factConfirm MOD 43-35 program timing, detector type, socket, wiring and installed burner sequence.

Engineering and installation checks

  • Keep the complete designation TMG740-3 MOD 43-35 in the quotation and receiving record.
  • Confirm the installed burner program, flame detector, socket/base and wiring before replacement.
  • Manufacturer verification basis: Honeywell Satronic TMG 740-3 operating and installation instructions.
Official product data

TMG740-3 MOD 43-35 key specifications

Supply voltage 220 / 240 V AC (-15...+10%)
Supply frequency 50 Hz (40-60 Hz)
Power consumption Approx. 15 VA
Protection class IP44
Ambient temperature -20 to +60 °C
Safety interval, start valve 3 s

Source: Honeywell Satronic TMG 740-3 operating and installation instructions.

Pre-order check 01

Installation environment

Record the as-found controller, socket, detector, wiring and burner sequence before removal.

  • Isolate the electrical supply before plugging or unplugging the control box.
  • Compare every terminal connection with the manufacturer wiring diagram.
  • Verify the flame detector, socket, cabling and burner operating sequence.
  • Confirm mounting, ambient conditions and enclosure protection for the installation.
Retain the nameplate, wiring record and controlled commissioning results.
Pre-order check 02

Compatibility confirmation

Match the complete control box, program version, burner arrangement and flame-detection chain.

Series
TMG 740-3
Program version
MOD 43-35
Flame detector
Ionisation, UV or infrared
Socket / base
TMG 70205; confirm installed arrangement
Burner arrangement
Confirm single-stage, two-stage, multi-stage or modulating sequence
Final selection: Confirm the complete model, nameplate, installed configuration and manufacturer documentation before ordering.
Manufacturer-documented family

More Honeywell Satronic TMG 740-3 Models

Burner control program variantsTMG 740-3 MOD 32-32 - documented burner-control timing versionTMG 740-3 MOD 63-55 - documented burner-control timing versionTMG 740-3 MOD 13-53 - documented high-speed steam-generator timing version

Related family versions are not direct substitutes; compare complete program timing and installation.

Socket and mounting partsSocket TMG 70205 - matching control-box socketPG-plate 70502 - socket insert plateCable entry plate 70501 - socket cable-entry plate

Confirm the installed socket, plate and terminal arrangement.

Ultraviolet flame detectorsUVZ 780 white 18814 - ultraviolet flame detectorUVZ 780 blue 18812 - ultraviolet flame detectorUVZ 780 red 18813 - ultraviolet flame detector

Confirm detector version, viewing arrangement and burner application.

Infrared flame detectorsIRD 820 16201 - infrared flicker detectorIRD 1020 end-on viewing 16522 - infrared flicker detectorIRD Holder M93 59093 - detector holder

Confirm detector type, holder, cable and installed flame-monitoring arrangement.

Cross-brand references

Additional Advantage Models

Process controlABB PM861AK01 3BSE018157R16GK5208-0BA00-2AB2Allen-Bradley 1715-A3IO

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

Industrial automationGE 323A3347P5RM7823A1016 RM7823AT8313 5020-301

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

Machinery and safety systems3500/50 133442-01BMXNOR0200HABB PSM0004 2RCA025059A0001R

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

Controllers and interfaces6ES7153-2BA02-0XB01768-L43 A 96491472GE CRS-10-MB

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

Sensing and monitoringC7232B5820T8123 PoE-30W 5014-201-013500/53 133396-01

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

I/O and communicationBMXDAI1615HABB CI840A 3BSE041882R16ES7214-1AD22-0XB0

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

Control-system modules1756-ENBTGE IC693MDL753ET7412B1008

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

Field and network components330103-00-04-10-02-05BMXNOE0100GEMU 554 15D137510

Cross-brand references are not direct substitutes; verify the complete manufacturer code.

These cross-brand industrial spare references are not direct substitutes for TMG740-3 MOD 43-35. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.CHECK WITH SALES

TMG740-3 MOD 43-35 Order Guide

Use the complete Honeywell Satronic designation and installed burner-control record for engineering review.
1Exact identityRetain TMG740-3 MOD 43-35 without shortening or normalizing the program designation.
2Brand and seriesHoneywell Satronic / TMG 740-3 burner control box family
3Product type and functionBurner control box for intermittent forced-draught and dual-fuel oil/gas burner applications described by the manufacturer.
4Program timingConfirm MOD 43-35 and compare every documented timing value with the installed sequence.
5System interfacesConfirm socket, terminal wiring, flame detector, burner stages, valves and air-damper sequence.
6Official sourceHoneywell Satronic TMG 740-3 operating and installation instructions

Manufacturer-Documented Related Items

Family variants and accessories for exact configuration review; they are not automatic substitutes.

Review the complete program, detector, socket and wiring before ordering.
Confirm the complete model and installed configuration.
HONEYWELL SATRONIC / BURNER CONTROL BOXTMG 740-3 MOD 32-32

Documented TMG 740-3 program-timing variant.

Manufacturer-documented reference
HONEYWELL SATRONIC / BURNER CONTROL BOXTMG 740-3 MOD 63-55

Documented TMG 740-3 program-timing variant.

Manufacturer-documented reference
HONEYWELL SATRONIC / BURNER CONTROL BOXTMG 740-3 MOD 13-53

Documented high-speed steam-generator timing variant.

Manufacturer-documented reference
HONEYWELL SATRONIC / SOCKETSocket TMG 70205

Matching socket/base reference for the TMG control box.

Manufacturer-documented reference
HONEYWELL SATRONIC / UV DETECTORUVZ 780 white 18814

Ultraviolet flame-detector reference.

Manufacturer-documented reference
HONEYWELL SATRONIC / IR DETECTORIRD 820 16201

Infrared flicker-detector reference.

Manufacturer-documented reference
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for exact-model review, quotation and shipment coordination.

Support scope

Model verificationCompare the complete Honeywell Satronic code, MOD 43-35 program and installed nameplate.
Compatibility reviewCheck socket, wiring, burner sequence, detector type and environmental conditions.
Quotation coordinationConfirm quantity, availability, lead time and destination.
Documentation boundaryUse only manufacturer-published facts; undocumented values are not inferred.

TMG740-3 MOD 43-35 FAQ

How should engineers identify TMG740-3 MOD 43-35 before approving a replacement?

Match the complete model, program version, nameplate, socket, terminal wiring, flame detector and burner sequence. A family-only match is not sufficient.

Which documented family contains TMG740-3 MOD 43-35?

It belongs to the Honeywell Satronic TMG 740-3 burner control box family. Confirm the exact MOD 43-35 program before release.

What is the documented product role?

The manufacturer describes TMG 740-3 control boxes for medium- and high-performance forced-draught and dual-fuel oil/gas burners in intermittent operation.

Which MOD 43-35 timing values require review?

The table lists 32 s supervised pre-purge, 40 s pre-purge with the air damper open, 4 s fixed pre-ignition and a 3 s start-valve safety interval. Verify the complete table against the installed sequence.

Which flame detectors are documented for the family?

The instructions list ionisation probes, ultraviolet sensors and infrared flicker detectors. Confirm the detector installed on the burner.

Can a nearby TMG 740-3 program version be used as a direct substitute?

No automatic substitution is stated. Different program versions have different timing sequences; use the complete code and manufacturer documentation.

What environmental data are documented?

The instructions state IP44 and an ambient temperature range of -20 to +60 °C. Final suitability depends on the complete installed enclosure and application.

What electrical precaution applies during service?

Isolate the electrical supply before plugging or unplugging the control box, and verify the wiring exactly against the manufacturer diagram.

What should a sourcing request include?

Provide TMG740-3 MOD 43-35, quantity, destination, clear nameplate images, socket and wiring details, detector type and burner sequence. Stella can coordinate the review.

What manufacturer-data boundary applies?

Only facts traceable to the Honeywell Satronic TMG 740-3 instructions are used. Site-specific suitability still requires the approved installation documentation.

Sales contactStella
WhatsApp+8618159889985
HONEYWELL SATRONIC / TMG 740-3

TMG 740-3 System Directory

Manufacturer-documented burner-control, socket and flame-detector references.

Burner Control Variants

TMG 740-3 MOD 32-32Documented burner-control timing version
TMG 740-3 MOD 63-55Documented burner-control timing version
TMG 740-3 MOD 13-53Documented high-speed steam-generator timing version
TMG 740-3 MOD 43-35Target burner-control program version
Socket TMG 70205Matching control-box socket
PG-plate 70502Socket insert plate
Cable entry plate 70501Socket cable-entry plate

Flame Detectors

UVZ 780 white 18814Ultraviolet flame detector
UVZ 780 blue 18812Ultraviolet flame detector
UVZ 780 red 18813Ultraviolet flame detector
IRD 820 16201Infrared flicker detector
IRD 1020 end-on viewing 16522Infrared flicker detector
IRD 1020 side-on left 16523Infrared flicker detector
IRD 1020 side-on right 16521Infrared flicker detector

Detector Holders and Connections

IRD Holder M93 59093Infrared-detector holder
Flame detector cable 7236001Flame-detector connection cable
Ionisation probeSupported flame-detection method; confirm installed probe
TMG 70205 terminal arrangementConfirm terminal wiring from the manufacturer diagram
Exact-match Nordwel links were not found for these references, so they remain unlinked. Confirm every model and configuration before quotation.
HONEYWELL SATRONIC / ACCESSORIES

Socket, Detector and Connection References

Manufacturer-documented parts for configuration review; confirm the installed arrangement.

SOCKET / BASE
Socket TMG 70205

Matching control-box socket reference.

SOCKET ACCESSORY
PG-plate 70502

Insert plate for the socket arrangement.

SOCKET ACCESSORY
Cable entry plate 70501

Cable-entry plate for the socket arrangement.

ULTRAVIOLET DETECTOR
UVZ 780 white 18814

Ultraviolet flame-detector reference.

INFRARED DETECTOR
IRD 820 16201

Infrared flicker-detector reference.

INFRARED DETECTOR
IRD 1020 end-on viewing 16522

End-on viewing detector reference.

INFRARED DETECTOR
IRD 1020 side-on left 16523

Left side-on viewing detector reference.

INFRARED DETECTOR
IRD 1020 side-on right 16521

Right side-on viewing detector reference.

DETECTOR CABLE
Flame detector cable 7236001

Flame-detector connection cable reference.

Confirm detector type, socket, cable, viewing direction and terminal compatibility before quotation.
Honeywell Satronic TMG 740-3 application review

TMG740-3 MOD 43-35 Applications

Documented application contexts for the TMG 740-3 family; final suitability depends on the complete model, burner configuration and manufacturer documentation.

Application contexts

01 · Forced-draught burner controlUse TMG740-3 MOD 43-35 only where the manufacturer-documented burner sequence and approved project conditions match.
02 · Dual-fuel oil/gas burner controlConfirm valves, air-damper sequence, flame detector and complete program timing before use.
03 · Single-stage and two-stage burner systemsVerify the installed burner stages and the full MOD 43-35 sequence against the manufacturer diagram.
04 · Multi-stage or modulating burner systemsUse only where the documented TMG 740-3 control arrangement and approved installation design match.

Why choose Nordwel

Exact-model controlKeep TMG740-3 MOD 43-35 and its program designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactStella manages pre-order clarification and follow-up.
Best fit: installations whose approved documentation specifies TMG740-3 MOD 43-35. Check first: burner sequence, flame detector, socket, wiring and complete manufacturer timing table.
Need help matching this Honeywell Satronic configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected industrial control, sensing, power and communication references for exact-model review.

Process ControlABB PM861AK01 3BSE018157R1AC 800M processor unit reference.
Power and DistributionABB PSM0004 2RCA025059A0001RPower-supply module reference.
Automation Communications6GK5208-0BA00-2AB2Industrial Ethernet switch reference.
Distributed I/O6ES7153-2BA02-0XB0SIMATIC ET 200M interface-module reference.
Redundant I/OAllen-Bradley 1715-A3IORedundant I/O system base-unit reference.
Automation Controllers1768-L43 A 96491472CompactLogix controller reference.
Industrial ControlGE 323A3347P5GE industrial control component; confirm host equipment.
Network InterfaceGE CRS-10-MBIndustrial communication-module reference; confirm installed system.
Burner ControlRM7823A1016 RM7823AHoneywell flame-safeguard control reference.
Gas MeasurementC7232B5820Honeywell duct-mounted carbon-dioxide sensor reference.
Trusted I/OT8313 5020-301ICS Triplex Trusted expander-interface reference.
Power InterfaceT8123 PoE-30W 5014-201-01ICS Triplex power-interface reference; confirm installed Trusted system.
Machinery Protection3500/50 133442-01Bently Nevada tachometer-module reference.
Machinery Protection3500/53 133396-01Bently Nevada overspeed-detection module reference.
Industrial CommunicationBMXNOR0200HSchneider industrial communication-module reference.
Digital I/OBMXDAI1615HSchneider discrete-input module reference.
Process CommunicationABB CI840A 3BSE041882R1PROFIBUS communication-interface reference.
Automation CPUs6ES7214-1AD22-0XB0Siemens SIMATIC S7-200 CPU reference.
Ethernet Communication1756-ENBTAllen-Bradley ControlLogix EtherNet/IP bridge reference.
Digital Output1756-OW16IAllen-Bradley relay-output module reference.
Analog OutputGE IC693ALG390GGE analog-output module reference.
Temperature ControlT7412B1008Honeywell temperature-controller reference.
Proximity Sensing330103-00-04-10-02-05Bently Nevada 3300 XL 8 mm proximity-probe reference.
Ethernet CommunicationBMXNOE0100Schneider Ethernet network-module reference.
Digital InputABB DI810 / 3BSE008508R1,3BSE013230R1ABB digital-input module reference.
Analog I/O6ES7134-6HD00-0BA1Siemens SIMATIC analog-I/O module reference.
Analog Input1746-NI4Allen-Bradley SLC analog-input module reference.
Digital OutputGE IC693MDL753EGE digital-output module reference.
HVAC ControlT7416A1022Honeywell temperature-controller reference.
Signal ConditioningKFD2-CRG2-1.DPepperl+Fuchs signal-conditioner reference.
These industrial spare references are not direct substitutes for TMG740-3 MOD 43-35. Confirm manufacturer, complete model, revision and installed-system compatibility before ordering.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp