Provides a 22-inch built-in multitouch endpoint for remote visualization. 21.5-inch Full HD built-in ITC2200 V3 with multi-touch operation.
Brand:
SIEMENSItem NO.:
6AV6646-1BA22-1AA0Goods Stock:
1Part Number:
6AV6646-1BA22-1AA0Description:
Provides a 22-inch built-in multitouch endpoint for remote visualizationProvides a 22-inch built-in multitouch endpoint for remote visualization. 21.5-inch Full HD built-in ITC2200 V3 with multi-touch operation.
| Product designation | ITC2200 V3 |
|---|---|
| Mounting | Built-in device |
| Display class | 22-inch Full HD |
| Visible diagonal | 21.5 inch |
| Operation | Projected-capacitive multi-touch |
| Network | Two Gigabit Ethernet ports in an integrated switch |
| Exact article number | 6AV6646-1BA22-1AA0 |
Source: Official Siemens ITC V3 operating instructions and declaration of conformity.
Verify the installed conditions before this exact model is removed or energized.
Match every item to the installed configuration.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected published products for regional sourcing and exact-code comparison.
Provides a 22-inch built-in multitouch endpoint for remote visualization. Record the mounting arrangement, supply, grounding, connected cables, address settings and environmental conditions.
Not on appearance alone. A proposed alternative requires documented review of function, electrical limits, interfaces, mounting and project compatibility.
Preserve the approved project, parameters, network settings, firmware record and a recoverable copy before exchange.
Verify the complete model, quantity, label condition, connector integrity and supplied accessories against the purchase record.
Confirm normal power status, absence of faults, expected communication and a controlled functional test before service release.
Include identity checks, wiring or connector map, configuration restored, measured results, alarms tested and final authorization.
Provide the complete code, quantity, clear label image, installed-system context, destination and required timing.
Keep it dry, protected from static and impact, traceably labelled and within the manufacturer storage conditions.
Only after connector type, pin assignment, shielding, grounding, damage and route suitability are verified.
Use the official lifecycle context to plan spares, documentation retention and a controlled migration path without assuming interchangeability.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
