other
Products
CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly
CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly
CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly

Emerson CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly

EMAIL SALES
Emerson official data reviewed
CE4002S1T2B6 — 32-Channel High-Side Discrete Output Assembly

A 32-channel 24 V DC high-side discrete output card with a 40-pin mass I/O termination block.

DeltaV M-series Traditional I/OHigh-density 24 V DC high-side actuationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series Traditional I/O
Product form32-Channel High-Side Discrete Output Assembly
Primary functionHigh-density 24 V DC high-side actuation
Signal directionOutput
Channel count32
Field voltage24 V DC
Output topologyHigh side
  • Brand:

    Emerson
  • Item NO.:

    CE4002S1T2B6
  • Goods Stock:

    1
  • Part Number:

    CE4002S1T2B6
  • Description:

    A 32-channel 24 V DC high-side discrete output card with a 40-pin mass I/O termination block.
CE4002S1T2B6 configuration inquiry

Get a precise quote for CE4002S1T2B6

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CE4002S1T2B6 official identification

A 32-channel 24 V DC high-side discrete output card with a 40-pin mass I/O termination block.

System roleHigh-density 24 V DC high-side actuation
Connection boundary40-pin mass I/O termination block
Selection focusMatch high-side output topology and 40-pin termination to the load schedule.
Release evidenceLoad-current schedule, 40-pin cable identity, fuse review and commanded-output test

Engineering and installation checks

  • undefined
  • Verify load polarity before connecting the high-side outputs.
  • Manufacturer verification basis: Emerson DeltaV M-series Traditional I/O product data sheet.
Official product data

CE4002S1T2B6 key specifications

Signal direction Output
Channel count 32
Field voltage 24 V DC
Output topology High side
Termination 40-pin mass I/O block
Redundancy Simplex
Series M-series Traditional I/O

Source: Emerson DeltaV M-series Traditional I/O product data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CE4002S1T2B6.

  • Verify load polarity before connecting the high-side outputs.
  • Inspect all 40 pins and mating alignment before latching the mass connector.
  • Calculate grouped load current and protective-device coordination.
  • Prove each command with the field load isolated or under a controlled permit.
Record the as-found condition and the final load-current schedule, 40-pin cable identity, fuse review and commanded-output test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CE4002S1T2B6 before purchase approval.

Load count
32 outputs maximum
Switching method
24 V DC high side
Cable interface
40-pin mass connection
Availability design
Simplex output path
Load assessment
Each field device checked for voltage and inrush
Final selection: Use only the values published for CE4002S1T2B6 in Emerson DeltaV M-series Traditional I/O product data sheet; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson VE3051C2Emerson VE3051C3Emerson VE3051C4

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson KJ4002X1-BA1Emerson KJ4002X1-CA1Emerson KJ3002X1-BH1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson VE4005S2B2Emerson VE4005S2B3Emerson CE4001S2T1B1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson CE4001S2T2B7Emerson CE4002S1T2B8Emerson CE4003S2B10

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ED1052-1MD08-0BA26ED1052-1FB08-0BA26ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7654-7HC00-0XA0AI563AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CI592-CS31CM5640-2ETHCM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CE4002S1T2B6 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityCE4002S1T2B6
2Official evidenceEmerson DeltaV M-series Traditional I/O product data sheet
3Installation surveyInspect all 40 pins and mating alignment before latching the mass connector.
4Compatibility gate32 outputs maximum
5Commissioning recordLoad-current schedule, 40-pin cable identity, fuse review and commanded-output test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CE4002S1T2B6 source record named on this page.
Interface review40-pin mass I/O termination block
Receiving checkMatch high-side output topology and 40-pin termination to the load schedule.
Release packageLoad-current schedule, 40-pin cable identity, fuse review and commanded-output test

CE4002S1T2B6 FAQ

Which companion item must agree with switching method for CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

Switching method is published as 24 V DC high side for the DeltaV M-series Traditional I/O. For solenoid command banks, verify load polarity before connecting the high-side outputs. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

How should a discrepancy in load assessment be closed for CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

The official CE4002S1T2B6 record gives load assessment as Each field device checked for voltage and inrush for its 32-channel high-side discrete output assembly function. For relay-coil actuation, inspect all 40 pins and mating alignment before latching the mass connector. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

What receiving evidence is required for the field voltage stated for CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

For this high-density 24 v dc high-side actuation selection, field voltage is 24 V DC. For sequence output cabinets, calculate grouped load current and protective-device coordination. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

How is redundancy separated from site-specific assumptions for CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

Use Simplex as the controlled redundancy value in the DeltaV M-series Traditional I/O review. For high-density machine commands, prove each command with the field load isolated or under a controlled permit. Release is appropriate only when the manufacturer value and the project requirement agree.

How should switching method be written in the purchase record for CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

Switching method is published as 24 V DC high side for the DeltaV M-series Traditional I/O. For solenoid command banks, verify load polarity before connecting the high-side outputs. A substitution review must close functional, mechanical, electrical and environmental differences independently.

What field observation validates load assessment for CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

The official CE4002S1T2B6 record gives load assessment as Each field device checked for voltage and inrush for its 32-channel high-side discrete output assembly function. For relay-coil actuation, inspect all 40 pins and mating alignment before latching the mass connector. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

What fault could result from misreading field voltage on CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

For this high-density 24 v dc high-side actuation selection, field voltage is 24 V DC. For sequence output cabinets, calculate grouped load current and protective-device coordination. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

What photograph or measurement proves redundancy on received CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

Use Simplex as the controlled redundancy value in the DeltaV M-series Traditional I/O review. For high-density machine commands, prove each command with the field load isolated or under a controlled permit. Mark the evidence source and revision so future reviewers can reproduce the decision.

Which switching method value identifies the reviewed CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly configuration?

Switching method is published as 24 V DC high side for the DeltaV M-series Traditional I/O. For solenoid command banks, verify load polarity before connecting the high-side outputs. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

Why does load assessment matter when selecting CE4002S1T2B6 32-Channel High-Side Discrete Output Assembly?

The official CE4002S1T2B6 record gives load assessment as Each field device checked for voltage and inrush for its 32-channel high-side discrete output assembly function. For relay-coil actuation, inspect all 40 pins and mating alignment before latching the mass connector. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series Traditional I/O application review

CE4002S1T2B6 Applications

These contexts use the manufacturer-documented function of CE4002S1T2B6; each requires a separate site-fit decision.

Application contexts

01 · Solenoid command banksApply the documented high-density 24 v dc high-side actuation only after confirming load count as 32 outputs maximum.
02 · Relay-coil actuationApply the documented high-density 24 v dc high-side actuation only after confirming switching method as 24 V DC high side.
03 · Sequence output cabinetsApply the documented high-density 24 v dc high-side actuation only after confirming cable interface as 40-pin mass connection.
04 · High-density machine commandsApply the documented high-density 24 v dc high-side actuation only after confirming availability design as Simplex output path.

Why choose Nordwel

Traceable identityCE4002S1T2B6 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to high-density 24 v dc high-side actuation, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CE4002S1T2B6, 40-pin mass I/O termination block, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp