other
Products
DO526 S500 High-Current Digital Output Module
DO526 S500 High-Current Digital Output Module
DO526 S500 High-Current Digital Output Module

ABB DO526 S500 High-Current Digital Output Module

EMAIL SALES
ABB official data reviewed
DO526 — S500 High-Current Digital Output Module

ABB lists DO526 in the S500 digital output portfolio. The reviewed record combines its exact identity with published electrical, channel, connection and installation data.

S500 digital outputEight-channel high-current transistor outputExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Exact modelDO526
Article number1SAP240800R0001
Output channels8 digital outputs
Output voltage24 V DC
Rated output current2 A per channel
Wiring method1-wire
Terminal unitTU542
LifecycleActive
  • Brand:

    ABB
  • Item NO.:

    DO526
  • Goods Stock:

    1
  • Part Number:

    DO526
  • Description:

    DO526 is an ABB s500 high-current digital output module documented for eight-channel high-current transistor output. This page retains the complete order identity and manufacturer-published selection data.
DO526 configuration inquiry

Get a precise quote for DO526

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

DO526 official identification

Selection review for DO526 starts with the manufacturer record, then checks the installed interface and application duty as separate approval points.

Operating scopeEight-channel high-current transistor output
Mating arrangementI/O bus through TU542 terminal unit
Host platformS500 digital output
Verification sourceABB AC500 V3 Hardware Manual

Engineering and installation checks

  • ABB identifies DO526 as s500 high-current digital output module.
  • Article number: 1SAP240800R0001.
  • Rated output current: 2 A per channel.
  • Manufacturer verification basis: ABB AC500 V3 Hardware Manual.
Official product data

DO526 key specifications

Article number 1SAP240800R0001
Output channels 8 digital outputs
Output voltage 24 V DC
Rated output current 2 A per channel
Wiring method 1-wire
Terminal unit TU542
Lifecycle Active

Source: ABB AC500 V3 Hardware Manual.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Seat DO526 on the documented i/o bus through tu542 terminal unit arrangement and inspect every mating contact before power is applied.
  • Record the installed output channels as 8 digital outputs and preserve the existing terminal or network labels.
  • Check enclosure protection, horizontal or vertical mounting, airflow, temperature and conductor strain against the ABB installation instructions.
  • After energization, verify status indicators, diagnostics and the controlled eight-channel high-current transistor output test before returning the loop or network to service.
Record the as-found installation and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed mechanical arrangement, connection and measurement chain.

Exact hardware identity
DO526
Article number
1SAP240800R0001
Output voltage
24 V DC
Installed interface
I/O bus through TU542 terminal unit
Engineering boundary
Match ABB configuration and device revision for eight-channel high-current transistor output
Final selection: Select DO526 only after the complete article identity, output channels, output voltage, host hardware and installed wiring have been matched to the approved project record.
Recommended model families

More ABB models

ABB verified models 01ABB AO561ABB AI562ABB TU532

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 02ABB TU531ABB CM577-ETHABB CI522-MODTCP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 03ABB CI521-MODTCPABB CI512-ETHCATABB CI511-ETHCAT

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 04ABB CI502-PNIOABB CI501-PNIOABB DA502

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Westinghouse 5X00226G01AREVA MVAJ101RA0802ABently Nevada 21505-00-28-05-02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Pepperl+Fuchs RSD-GW3-Ex2.DPELoad Cell Central OM-19-2Schneider AP4423

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB 086364-001ABB ACS880-04-330A-7ABB NTR012-A

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901Schneider BMXDDO1602

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Schneider BMENOC0301GE SST-PFB3-VME2Woodhead SST-DNP-PCI-4

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Vibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222Westinghouse 5X00241G02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

DO526 Order Guide

Use the complete ABB designation and installed hardware record for engineering review.
1Full designationDO526; do not shorten or append an unverified suffix.
2Documented device classS500 High-Current Digital Output Module
3Primary system roleEight-channel high-current transistor output
4Article number1SAP240800R0001
5Mating arrangementI/O bus through TU542 terminal unit
6ABB verification recordABB AC500 V3 Hardware Manual

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

DO526 identity controlReconcile the order code, device label and article number.
Output channels reviewConfirm 8 digital outputs against the installed load or network.
Connection-file auditPreserve i/o bus through tu542 terminal unit drawings and labels.
Commissioning evidenceCapture diagnostics and a controlled eight-channel high-current transistor output result.

DO526 FAQ

How is the documented role of DO526 when article number is 1SAP240800R0001?

Use the complete DO526 designation together with article number 1SAP240800R0001. Reject any record that changes a suffix, article identity or documented device class.

For eight-channel high-current transistor output, which quotation evidence confirms DO526 with article number 1SAP240800R0001?

Include the nameplate, quantity, installed base or terminal unit, clear connector photographs, destination and the approved drawing that defines i/o bus through tu542 terminal unit.

How does the DO526 s500 high-current digital output module with article number 1SAP240800R0001 serve eight-channel high-current transistor output?

ABB documents the unit for eight-channel high-current transistor output. The project must independently confirm that this role matches the existing architecture and controlled cause-and-effect.

Before moving DO526 wiring for eight-channel high-current transistor output, what must be retained for output voltage 24 V DC?

Document I/O bus through TU542 terminal unit. Retain terminal numbers, polarity, shielding, grounding, device addresses and cable identifiers exactly as found.

For eight-channel high-current transistor output, after energizing DO526, how should rated output current 2 A per channel be checked?

Review LEDs and diagnostics, then test the relevant channels or communication path without bypassing site interlocks. File the result with the maintenance record.

Which mounting review supports eight-channel high-current transistor output for DO526 at article number 1SAP240800R0001?

Allow for the documented mating hardware, conductor bend radius, service access and the ABB environmental limits. Do not infer dimensions from a neighboring module.

Why must wiring method 1-wire stay with DO526 for eight-channel high-current transistor output approval?

The review must preserve wiring method 1-wire; then validate terminal unit TU542 against the field requirement.

Can another s500 digital output device replace DO526 when article number 1SAP240800R0001 or terminal unit differs?

Compare every published channel, protocol, voltage, current, terminal and lifecycle field. A similar family name is not evidence that the alternative is interchangeable.

At receipt for eight-channel high-current transistor output, which output channels 8 digital outputs evidence confirms DO526?

Inspect the label for DO526, verify the expected s500 high-current digital output module, check connector condition and reconcile supplied accessories with the approved purchase record.

Which controlled documents authorize DO526, article number 1SAP240800R0001, for eight-channel high-current transistor output?

The approved hardware configuration, I/O or network drawings, protection settings and commissioning procedure must collectively confirm eight-channel high-current transistor output.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
S500 digital output application review

DO526 Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · DO526 controlled replacementPreserve the complete DO526 identity when replacing an installed unit during a planned outage.
02 · Eight-channel high-current transistor output retrofit reviewConfirm that the approved architecture still requires eight-channel high-current transistor output before changing hardware.
03 · S500 digital output spare verificationValidate terminal, base, firmware and drawing compatibility for an on-site s500 digital output spare.
04 · 8 digital outputs application checkUse the ABB-published output channels value 8 digital outputs as a selection checkpoint.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify DO526. Check first: Seat DO526 on the documented i/o bus through tu542 terminal unit arrangement and inspect every mating contact before power is applied.
Need help matching this ABB configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp