other
Products
CM598-CN AC500 CANopen Master Module
CM598-CN AC500 CANopen Master Module
CM598-CN AC500 CANopen Master Module

ABB CM598-CN AC500 CANopen Master Module

EMAIL SALES
ABB official data reviewed
CM598-CN — AC500 CANopen Master Module

ABB lists CM598-CN in the AC500 communication module portfolio. The reviewed record combines its exact identity with published electrical, channel, connection and installation data.

AC500 communication moduleCANopen manager communicationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Exact modelCM598-CN
Article number1SAP173800R0001
CANopen roleMaster
Maximum rate1 Mbit/s
Connector5-pin Combicon, removable
Status display5 LEDs
DiagnosticsModule and remote-device diagnosis
LifecycleActive
  • Brand:

    ABB
  • Item NO.:

    CM598-CN
  • Goods Stock:

    1
  • Part Number:

    CM598-CN
  • Description:

    CM598-CN is an ABB ac500 canopen master module documented for canopen manager communication. This page retains the complete order identity and manufacturer-published selection data.
CM598-CN configuration inquiry

Get a precise quote for CM598-CN

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CM598-CN official identification

Selection review for CM598-CN starts with the manufacturer record, then checks the installed interface and application duty as separate approval points.

Operating scopeCANopen manager communication
Mating arrangement5-pin removable spring-terminal CAN connector
Host platformAC500 communication module
Verification sourceABB AC500 V3 Hardware Manual

Engineering and installation checks

  • ABB identifies CM598-CN as ac500 canopen master module.
  • Article number: 1SAP173800R0001.
  • Connector: 5-pin Combicon, removable.
  • Manufacturer verification basis: ABB AC500 V3 Hardware Manual.
Official product data

CM598-CN key specifications

Article number 1SAP173800R0001
CANopen role Master
Maximum rate 1 Mbit/s
Connector 5-pin Combicon, removable
Status display 5 LEDs
Diagnostics Module and remote-device diagnosis
Lifecycle Active

Source: ABB AC500 V3 Hardware Manual.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Seat CM598-CN on the documented 5-pin removable spring-terminal can connector arrangement and inspect every mating contact before power is applied.
  • Record the installed canopen role as Master and preserve the existing terminal or network labels.
  • Check enclosure protection, horizontal or vertical mounting, airflow, temperature and conductor strain against the ABB installation instructions.
  • After energization, verify status indicators, diagnostics and the controlled canopen manager communication test before returning the loop or network to service.
Record the as-found installation and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed mechanical arrangement, connection and measurement chain.

Exact hardware identity
CM598-CN
Article number
1SAP173800R0001
Maximum rate
1 Mbit/s
Installed interface
5-pin removable spring-terminal CAN connector
Engineering boundary
Match ABB configuration and device revision for canopen manager communication
Final selection: Select CM598-CN only after the complete article identity, canopen role, maximum rate, host hardware and installed wiring have been matched to the approved project record.
Recommended model families

More ABB models

ABB verified models 01ABB CI502-PNIOABB CI501-PNIOABB DA502

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 02ABB AO561ABB AI562ABB TU532

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 03ABB TU531ABB CM577-ETHABB CI522-MODTCP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 04ABB CI521-MODTCPABB CI512-ETHCATABB CI511-ETHCAT

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01GE SST-PFB3-VME2Woodhead SST-DNP-PCI-4Vibro-Meter AF70982 / 111-412-000-012

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Vibro-Meter S3960 AC46286 / 144-201-000-222Westinghouse 5X00241G02Westinghouse 5X00058G01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Westinghouse 5X00226G01AREVA MVAJ101RA0802ABently Nevada 21505-00-28-05-02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Pepperl+Fuchs RSD-GW3-Ex2.DPELoad Cell Central OM-19-2Schneider AP4423

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB 086364-001ABB ACS880-04-330A-7ABB NTR012-A

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB NDBU-95 64008366DABB RAI02JABB PFEA113 3BSE028144R0020

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101ABB 3BHE015619R0001 XVD825A01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901Schneider BMXDDO1602

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CM598-CN Order Guide

Use the complete ABB designation and installed hardware record for engineering review.
1Full designationCM598-CN; do not shorten or append an unverified suffix.
2Documented device classAC500 CANopen Master Module
3Primary system roleCANopen manager communication
4Article number1SAP173800R0001
5Mating arrangement5-pin removable spring-terminal CAN connector
6ABB verification recordABB AC500 V3 Hardware Manual

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

CM598-CN identity controlReconcile the order code, device label and article number.
CANopen role reviewConfirm Master against the installed load or network.
Connection-file auditPreserve 5-pin removable spring-terminal can connector drawings and labels.
Commissioning evidenceCapture diagnostics and a controlled canopen manager communication result.

CM598-CN FAQ

Which project document closes the review of CM598-CN when article number is 1SAP173800R0001?

Use the complete CM598-CN designation together with article number 1SAP173800R0001. Reject any record that changes a suffix, article identity or documented device class.

For canopen manager communication, which quotation evidence confirms CM598-CN with article number 1SAP173800R0001?

Include the nameplate, quantity, installed base or terminal unit, clear connector photographs, destination and the approved drawing that defines 5-pin removable spring-terminal can connector.

How does the CM598-CN ac500 canopen master module with article number 1SAP173800R0001 serve canopen manager communication?

ABB documents the unit for canopen manager communication. The project must independently confirm that this role matches the existing architecture and controlled cause-and-effect.

Before moving CM598-CN wiring for canopen manager communication, what must be retained for maximum rate 1 Mbit/s?

Document 5-pin removable spring-terminal CAN connector. Retain terminal numbers, polarity, shielding, grounding, device addresses and cable identifiers exactly as found.

For canopen manager communication, after energizing CM598-CN, how should connector 5-pin Combicon, removable be checked?

Review LEDs and diagnostics, then test the relevant channels or communication path without bypassing site interlocks. File the result with the maintenance record.

Which mounting review supports canopen manager communication for CM598-CN at article number 1SAP173800R0001?

Allow for the documented mating hardware, conductor bend radius, service access and the ABB environmental limits. Do not infer dimensions from a neighboring module.

Why must status display 5 LEDs stay with CM598-CN for canopen manager communication approval?

The review must preserve status display 5 LEDs; then validate diagnostics Module and remote-device diagnosis against the field requirement.

Can another ac500 communication module device replace CM598-CN when article number 1SAP173800R0001 or diagnostics differs?

Compare every published channel, protocol, voltage, current, terminal and lifecycle field. A similar family name is not evidence that the alternative is interchangeable.

At receipt for canopen manager communication, which canopen role Master evidence confirms CM598-CN?

Inspect the label for CM598-CN, verify the expected ac500 canopen master module, check connector condition and reconcile supplied accessories with the approved purchase record.

Which controlled documents authorize CM598-CN, article number 1SAP173800R0001, for canopen manager communication?

The approved hardware configuration, I/O or network drawings, protection settings and commissioning procedure must collectively confirm canopen manager communication.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
AC500 communication module application review

CM598-CN Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · CM598-CN controlled replacementPreserve the complete CM598-CN identity when replacing an installed unit during a planned outage.
02 · CANopen manager communication retrofit reviewConfirm that the approved architecture still requires canopen manager communication before changing hardware.
03 · AC500 communication module spare verificationValidate terminal, base, firmware and drawing compatibility for an on-site ac500 communication module spare.
04 · Master application checkUse the ABB-published canopen role value Master as a selection checkpoint.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify CM598-CN. Check first: Seat CM598-CN on the documented 5-pin removable spring-terminal can connector arrangement and inspect every mating contact before power is applied.
Need help matching this ABB configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp