other
Products
CM582-DP AC500 PROFIBUS Slave Module
CM582-DP AC500 PROFIBUS Slave Module
CM582-DP AC500 PROFIBUS Slave Module

ABB CM582-DP AC500 PROFIBUS Slave Module

EMAIL SALES
ABB official data reviewed
CM582-DP — AC500 PROFIBUS Slave Module

ABB lists CM582-DP in the AC500 communication module portfolio. The reviewed record combines its exact identity with published electrical, channel, connection and installation data.

AC500 communication modulePROFIBUS DP slave communicationExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Exact modelCM582-DP
Article number1SAP172200R0001
PROFIBUS roleDP slave
Maximum rate12 Mbit/s
Cyclic input dataUp to 244 bytes
Cyclic output dataUp to 244 bytes
Typical current65 mA from 24 V DC base supply
WeightApprox. 150 g
  • Brand:

    ABB
  • Item NO.:

    CM582-DP
  • Goods Stock:

    1
  • Part Number:

    CM582-DP
  • Description:

    CM582-DP is an ABB ac500 profibus slave module documented for profibus dp slave communication. This page retains the complete order identity and manufacturer-published selection data.
CM582-DP configuration inquiry

Get a precise quote for CM582-DP

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CM582-DP official identification

Selection review for CM582-DP starts with the manufacturer record, then checks the installed interface and application duty as separate approval points.

Operating scopePROFIBUS DP slave communication
Mating arrangement9-pin female D-sub PROFIBUS connector
Host platformAC500 communication module
Verification sourceABB AC500 V3 Hardware Manual

Engineering and installation checks

  • ABB identifies CM582-DP as ac500 profibus slave module.
  • Article number: 1SAP172200R0001.
  • Cyclic input data: Up to 244 bytes.
  • Manufacturer verification basis: ABB AC500 V3 Hardware Manual.
Official product data

CM582-DP key specifications

Article number 1SAP172200R0001
PROFIBUS role DP slave
Maximum rate 12 Mbit/s
Cyclic input data Up to 244 bytes
Cyclic output data Up to 244 bytes
Typical current 65 mA from 24 V DC base supply
Weight Approx. 150 g

Source: ABB AC500 V3 Hardware Manual.

Pre-order check 01

Installation environment

Verify the installed mounting, connection and environmental conditions before this exact configuration is removed or energized.

  • Seat CM582-DP on the documented 9-pin female d-sub profibus connector arrangement and inspect every mating contact before power is applied.
  • Record the installed profibus role as DP slave and preserve the existing terminal or network labels.
  • Check enclosure protection, horizontal or vertical mounting, airflow, temperature and conductor strain against the ABB installation instructions.
  • After energization, verify status indicators, diagnostics and the controlled profibus dp slave communication test before returning the loop or network to service.
Record the as-found installation and final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete designation to the installed mechanical arrangement, connection and measurement chain.

Exact hardware identity
CM582-DP
Article number
1SAP172200R0001
Maximum rate
12 Mbit/s
Installed interface
9-pin female D-sub PROFIBUS connector
Engineering boundary
Match ABB configuration and device revision for profibus dp slave communication
Final selection: Select CM582-DP only after the complete article identity, profibus role, maximum rate, host hardware and installed wiring have been matched to the approved project record.
Recommended model families

More ABB models

ABB verified models 01ABB CI522-MODTCPABB CI521-MODTCPABB CI512-ETHCAT

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 02ABB CI511-ETHCATABB CI502-PNIOABB CI501-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 03ABB DA502ABB AO561ABB AI562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

ABB verified models 04ABB TU532ABB TU531ABB CM577-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB PFEA113 3BSE028144R0020ABB 3BHE037649R0101 PDD500A101ABB 3BHE019633R0101 PDD200A101

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB 3BHE015619R0001 XVD825A01ABB DSTA002B 3BSE018317R1Schneider PN072132P902 / 3D658187G901

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Schneider BMXDDO1602Schneider BMENOC0301GE SST-PFB3-VME2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Woodhead SST-DNP-PCI-4Vibro-Meter AF70982 / 111-412-000-012Vibro-Meter S3960 AC46286 / 144-201-000-222

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Westinghouse 5X00241G02Westinghouse 5X00058G01Westinghouse 5X00226G01

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06AREVA MVAJ101RA0802ABently Nevada 21505-00-28-05-02Pepperl+Fuchs RSD-GW3-Ex2.DPE

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Load Cell Central OM-19-2Schneider AP4423ABB 086364-001

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB ACS880-04-330A-7ABB NTR012-AABB NDBU-95 64008366D

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CM582-DP Order Guide

Use the complete ABB designation and installed hardware record for engineering review.
1Full designationCM582-DP; do not shorten or append an unverified suffix.
2Documented device classAC500 PROFIBUS Slave Module
3Primary system rolePROFIBUS DP slave communication
4Article number1SAP172200R0001
5Mating arrangement9-pin female D-sub PROFIBUS connector
6ABB verification recordABB AC500 V3 Hardware Manual

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

CM582-DP identity controlReconcile the order code, device label and article number.
PROFIBUS role reviewConfirm DP slave against the installed load or network.
Connection-file auditPreserve 9-pin female d-sub profibus connector drawings and labels.
Commissioning evidenceCapture diagnostics and a controlled profibus dp slave communication result.

CM582-DP FAQ

When reviewing cabinet space for CM582-DP when article number is 1SAP172200R0001?

Use the complete CM582-DP designation together with article number 1SAP172200R0001. Reject any record that changes a suffix, article identity or documented device class.

For profibus dp slave communication, which quotation evidence confirms CM582-DP with article number 1SAP172200R0001?

Include the nameplate, quantity, installed base or terminal unit, clear connector photographs, destination and the approved drawing that defines 9-pin female d-sub profibus connector.

How does the CM582-DP ac500 profibus slave module with article number 1SAP172200R0001 serve profibus dp slave communication?

ABB documents the unit for profibus dp slave communication. The project must independently confirm that this role matches the existing architecture and controlled cause-and-effect.

Before moving CM582-DP wiring for profibus dp slave communication, what must be retained for maximum rate 12 Mbit/s?

Document 9-pin female D-sub PROFIBUS connector. Retain terminal numbers, polarity, shielding, grounding, device addresses and cable identifiers exactly as found.

For profibus dp slave communication, after energizing CM582-DP, how should cyclic input data Up to 244 bytes be checked?

Review LEDs and diagnostics, then test the relevant channels or communication path without bypassing site interlocks. File the result with the maintenance record.

Which mounting review supports profibus dp slave communication for CM582-DP at article number 1SAP172200R0001?

Allow for the documented mating hardware, conductor bend radius, service access and the ABB environmental limits. Do not infer dimensions from a neighboring module.

Why must cyclic output data Up to 244 bytes stay with CM582-DP for profibus dp slave communication approval?

The review must preserve cyclic output data Up to 244 bytes; then validate typical current 65 mA from 24 V DC base supply against the field requirement.

Can another ac500 communication module device replace CM582-DP when article number 1SAP172200R0001 or typical current differs?

Compare every published channel, protocol, voltage, current, terminal and lifecycle field. A similar family name is not evidence that the alternative is interchangeable.

At receipt for profibus dp slave communication, which profibus role DP slave evidence confirms CM582-DP?

Inspect the label for CM582-DP, verify the expected ac500 profibus slave module, check connector condition and reconcile supplied accessories with the approved purchase record.

Which controlled documents authorize CM582-DP, article number 1SAP172200R0001, for profibus dp slave communication?

The approved hardware configuration, I/O or network drawings, protection settings and commissioning procedure must collectively confirm profibus dp slave communication.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
AC500 communication module application review

CM582-DP Applications

Typical inquiry contexts based on the documented product role; final suitability depends on the installed system.

Application contexts

01 · CM582-DP controlled replacementPreserve the complete CM582-DP identity when replacing an installed unit during a planned outage.
02 · PROFIBUS DP slave communication retrofit reviewConfirm that the approved architecture still requires profibus dp slave communication before changing hardware.
03 · AC500 communication module spare verificationValidate terminal, base, firmware and drawing compatibility for an on-site ac500 communication module spare.
04 · DP slave application checkUse the ABB-published profibus role value DP slave as a selection checkpoint.

Why choose Nordwel

Exact-model controlKeep the complete designation in every quotation and replacement record.
Technical cautionSeparate verified manufacturer data from site-specific engineering decisions.
Fast coordinationReview model, quantity, destination and required schedule in one inquiry.
Dedicated contactTiffany Guan manages pre-order clarification and follow-up.
Best fit: projects whose approved drawings and parts list specify CM582-DP. Check first: Seat CM582-DP on the documented 9-pin female d-sub profibus connector arrangement and inspect every mating contact before power is applied.
Need help matching this ABB configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp