other
Products
CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly
CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly
CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly

Emerson CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly

EMAIL SALES
Emerson official data reviewed
CE4033S2B10 — Redundant 16-Channel HART Analog Input Assembly

A redundant Series 2 Plus analog input assembly for sixteen HART channels, supporting two- and four-wire field arrangements through redundant termination.

DeltaV M-series Series 2 Plus I/ORedundant 4–20 mA HART signal acquisitionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerEmerson
Documented familyDeltaV M-series Series 2 Plus I/O
Product formRedundant 16-Channel HART Analog Input Assembly
Primary functionRedundant 4–20 mA HART signal acquisition
Input capacity16 channels
Analog signal4–20 mA
CommunicationHART
Supported wiring2 or 4 wire
  • Brand:

    Emerson
  • Item NO.:

    CE4033S2B10
  • Goods Stock:

    1
  • Part Number:

    CE4033S2B10
  • Description:

    A redundant Series 2 Plus analog input assembly for sixteen HART channels, supporting two- and four-wire field arrangements through redundant termination.
CE4033S2B10 configuration inquiry

Get a precise quote for CE4033S2B10

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CE4033S2B10 official identification

A redundant Series 2 Plus analog input assembly for sixteen HART channels, supporting two- and four-wire field arrangements through redundant termination.

System roleRedundant 4–20 mA HART signal acquisition
Connection boundaryRedundant standard I/O termination block for 2- or 4-wire devices
Selection focusConfirm transmitter wiring mode, redundant card pairing and the B10 block.
Release evidenceWiring-mode matrix, redundant diagnostics, HART inventory and calibrated failover test

Engineering and installation checks

  • undefined
  • Classify every transmitter as two-wire or four-wire before termination.
  • Manufacturer verification basis: Emerson DeltaV M-series Traditional I/O product data sheet.
Official product data

CE4033S2B10 key specifications

Input capacity 16 channels
Analog signal 4–20 mA
Communication HART
Supported wiring 2 or 4 wire
System architecture Redundant
Termination Redundant standard I/O block
Electronics family Series 2 Plus

Source: Emerson DeltaV M-series Traditional I/O product data sheet.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of CE4033S2B10.

  • Classify every transmitter as two-wire or four-wire before termination.
  • Verify both analog input cards belong to the approved redundant pair.
  • Preserve individual loop shielding while routing through the redundant block.
  • Run a controlled channel-path failure test after calibration.
Record the as-found condition and the final wiring-mode matrix, redundant diagnostics, hart inventory and calibrated failover test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for CE4033S2B10 before purchase approval.

Field device mix
Documented 2- and 4-wire transmitters
Loop count
16 maximum
Protocol
HART overlay
Redundancy
Paired input electronics
Termination code
B10 redundant standard block
Final selection: Use only the values published for CE4033S2B10 in Emerson DeltaV M-series Traditional I/O product data sheet; site suitability remains an engineering decision.
Recommended model families

More Emerson models

Emerson verified models 01Emerson CE4003S2B10Emerson CE4003S2B9Emerson CE4031S2T2B6

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 02Emerson CE4032S1T2B8Emerson CE4036P2Emerson CS6002

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 03Emerson 333UEmerson VE3009Emerson VE3011

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Emerson verified models 04Emerson VE3012Emerson VE3051C1Emerson VE3051C2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7515-2AN03-0AB06ES7517-3UP00-0AB06ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7551-1AB00-0AB06ES7553-1AA00-0AB06ED1052-1MD08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 046ED1052-1FB08-0BA26ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 056ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06AI563AO568CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08CM5640-2ETHCM582-DPCM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

CE4033S2B10 Order Guide

Use the complete Emerson designation and installed hardware record for engineering review.
1Ordering identityCE4033S2B10
2Official evidenceEmerson DeltaV M-series Traditional I/O product data sheet
3Installation surveyVerify both analog input cards belong to the approved redundant pair.
4Compatibility gateDocumented 2- and 4-wire transmitters
5Commissioning recordWiring-mode matrix, redundant diagnostics, HART inventory and calibrated failover test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact CE4033S2B10 source record named on this page.
Interface reviewRedundant standard I/O termination block for 2- or 4-wire devices
Receiving checkConfirm transmitter wiring mode, redundant card pairing and the B10 block.
Release packageWiring-mode matrix, redundant diagnostics, HART inventory and calibrated failover test

CE4033S2B10 FAQ

When can the CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly communication entry be released for quotation?

For this redundant 4–20 ma hart signal acquisition selection, communication is HART. For redundant critical transmitters, classify every transmitter as two-wire or four-wire before termination. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

How should engineers verify termination before fitting CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly?

Use Redundant standard I/O block as the controlled termination value in the DeltaV M-series Series 2 Plus I/O review. For mixed-power analog loops, verify both analog input cards belong to the approved redundant pair. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

What installation decision is controlled by loop count on CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly?

Loop count is published as 16 maximum for the DeltaV M-series Series 2 Plus I/O. For hart diagnostics with failover, preserve individual loop shielding while routing through the redundant block. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

What commissioning check confirms the documented termination code for CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly?

The official CE4033S2B10 record gives termination code as B10 redundant standard block for its redundant 16-channel hart analog input assembly function. For high-availability process measurement, run a controlled channel-path failure test after calibration. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

At which review gate should CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly communication be challenged?

For this redundant 4–20 ma hart signal acquisition selection, communication is HART. For redundant critical transmitters, classify every transmitter as two-wire or four-wire before termination. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

Which drawing or schedule should carry the CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly termination record?

Use Redundant standard I/O block as the controlled termination value in the DeltaV M-series Series 2 Plus I/O review. For mixed-power analog loops, verify both analog input cards belong to the approved redundant pair. Release is appropriate only when the manufacturer value and the project requirement agree.

Which companion item must agree with loop count for CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly?

Loop count is published as 16 maximum for the DeltaV M-series Series 2 Plus I/O. For hart diagnostics with failover, preserve individual loop shielding while routing through the redundant block. A substitution review must close functional, mechanical, electrical and environmental differences independently.

How should a discrepancy in termination code be closed for CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly?

The official CE4033S2B10 record gives termination code as B10 redundant standard block for its redundant 16-channel hart analog input assembly function. For high-availability process measurement, run a controlled channel-path failure test after calibration. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

What receiving evidence is required for the communication stated for CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly?

For this redundant 4–20 ma hart signal acquisition selection, communication is HART. For redundant critical transmitters, classify every transmitter as two-wire or four-wire before termination. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

How is termination separated from site-specific assumptions for CE4033S2B10 Redundant 16-Channel HART Analog Input Assembly?

Use Redundant standard I/O block as the controlled termination value in the DeltaV M-series Series 2 Plus I/O review. For mixed-power analog loops, verify both analog input cards belong to the approved redundant pair. Mark the evidence source and revision so future reviewers can reproduce the decision.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
DeltaV M-series Series 2 Plus I/O application review

CE4033S2B10 Applications

These contexts use the manufacturer-documented function of CE4033S2B10; each requires a separate site-fit decision.

Application contexts

01 · Redundant critical transmittersApply the documented redundant 4–20 ma hart signal acquisition only after confirming field device mix as Documented 2- and 4-wire transmitters.
02 · Mixed-power analog loopsApply the documented redundant 4–20 ma hart signal acquisition only after confirming loop count as 16 maximum.
03 · HART diagnostics with failoverApply the documented redundant 4–20 ma hart signal acquisition only after confirming protocol as HART overlay.
04 · High-availability process measurementApply the documented redundant 4–20 ma hart signal acquisition only after confirming redundancy as Paired input electronics.

Why choose Nordwel

Traceable identityCE4033S2B10 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to redundant 4–20 ma hart signal acquisition, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain CE4033S2B10, Redundant standard I/O termination block for 2- or 4-wire devices, and the approved site record as three independent checks.
Need help matching this Emerson configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp