A legacy CPU 416-2 documented with 1.6 MB memory and hardware version 9 in official Siemens operating instructions.
Brand:
SIEMENSItem NO.:
6ES7416-2XL01-0AB0Goods Stock:
1Part Number:
6ES7416-2XL01-0AB0Description:
A legacy CPU 416-2 documented with 1.6 MB memory and hardware version 9 in official Siemens operating instructions.A legacy CPU 416-2 documented with 1.6 MB memory and hardware version 9 in official Siemens operating instructions.
| Article number | 6ES7416-2XL01-0AB0 |
|---|---|
| CPU class | CPU 416-2 |
| Memory | 1.6 MB |
| Hardware version | 9 |
| Legacy integration note | DPV1 operation not supported in cited application |
| Configuration route | GSD-based integration in cited application |
Source: Siemens official operating instructions and CPU compatibility list.
Prepare 6ES7416-2XL01-0AB0 from documented physical, electrical and project conditions before work begins.
Approve 6ES7416-2XL01-0AB0 only when every listed selection boundary agrees with the installed system.
Use this group when measure project memory use and document the existing bus topology.
Compare each candidate against 1.6 mb cpu 416-2 and hardware version 9.
Keep existing profibus and communication-processor paths require project-specific validation as its own decision.
Release only with compiled project report, hardware version image and partner list.
The high-capacity legacy central control requirement stays traceable to the approved project.
Do not extend data beyond this boundary: Use the 1.6 MB and hardware version 9 statements only for 6ES7416-2XL01-0AB0; the official manual also treats this older CPU as not supporting DPV1 operation in the cited context.
Catalog checkpoint: Siemens operating instructions list this CPU 416-2 with 1.6 MB memory and hardware version 9.
Configuration checkpoint: The cited legacy-CPU table states that these listed CPUs cannot be operated in DPV1 mode for the described distributed-I/O integration.
Use installed evidence to close the remaining site-specific checks for 6ES7416-2XL01-0AB0.
Confirm quantity and destination only after the technical record is complete.
Inspect received labels and connections before the item reaches the cabinet.
Close commissioning with the test evidence assigned to 6ES7416-2XL01-0AB0.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Output-module reference for control-system projects.
Tiffany-verified targetEthernet-module reference for network compatibility review.
Tiffany-verified targetProximity-sensor reference for machinery applications.
Tiffany-verified targetAccelerometer reference for vibration-monitoring projects.
Tiffany-verified targetProcessor-module reference for installed control systems.
Tiffany-verified targetAnalog-input board reference for replacement review.
Tiffany-verified targetCompare it with the compiled utilization and required reserve; do not interpret the headline value as proof that every archived project will load or perform correctly.
It affects the documented distributed-I/O integration path for this older CPU, so device features and parameter handling must be checked against the actual bus configuration.
They define hardware identities used by the legacy configuration. Missing or changed files can prevent a reproducible build even when the source project is available.
Provide station addresses, device articles, network speed, termination points and a topology drawing tied to the current hardware configuration.
Treat the hardware marking as a physical revision and record firmware separately when it is visible; one value must not be substituted for the other.
A second workstation or controlled environment can open, compile and display the same hardware configuration without unresolved catalog items.
No. Capture each processor article and revision, then verify the documented pairing because future replacement or firmware changes can expose an unsupported combination.
Use the compiler report after the proposed change, include online and diagnostic requirements, and retain the approved reserve criterion with the result.
Keep the as-found hardware, verified project backup, parameter files, cable map and authority to restore the original configuration within the outage plan.
Every configured station must exchange data without unresolved diagnostics and complete its assigned plant function under the signed test sequence.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
